Related references
Note: Only part of the references are listed.Influence of oxygen on densification kinetics of WC nanopowders during SPS
Eugeniy Lantsev et al.
CERAMICS INTERNATIONAL (2021)
Microstructural, thermal, electrical, and magnetic properties of optimized Fe3O4-SiC hybrid nano filler reinforced aluminium matrix composite
Negin Ashrafi et al.
MATERIALS CHEMISTRY AND PHYSICS (2021)
An investigation on primary Si refinement by Sr and Sb additions in a hypereutectic Al-Si alloy
Reza Haghayeghi et al.
MATERIALS LETTERS (2021)
Simultaneously improving strength and ductility of hybrid Al-Si matrix composite with polyphasic and multi-scale ceramic particles
Binghao Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effects of graphene addition on the refinement of silicon phase in graphene/A356.2 composites
Jinfeng Leng et al.
MATERIALS LETTERS (2021)
Tribological characterization of LM26/SiC/Ni.-Gr. Hybrid aluminium matrix composites (HAMCs) for high temperature applications
Suyash Y. Pawar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Precipitation behavior and mechanical performances of A356.2 alloy treated by Al-Sr-La composite refinement-modification agent
Xingchuan Xia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Modification of the silicon phase and mechanical properties in Al-40Zn-6Si alloy with Eu addition
Feng Mao et al.
MATERIALS & DESIGN (2020)
Wear studies of hybrid AMCs reinforced with naturally occurring sillimanite and rutile ceramic particles for brake-rotor applications
Rahul Gupta et al.
CERAMICS INTERNATIONAL (2020)
High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane
Xin Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Strengthening effect induced by interfacial reaction in graphene nanoplatelets reinforced aluminum matrix composites
Bowen Xiong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Experimental and numerical investigation on strengthening mechanisms of nanostructured Al-SiC composites
A. Melaibari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Spark plasma sintered Al-based composites reinforced with BN nanosheets exfoliated under ball milling in ethylene glycol
Khabib U. Yusupov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Combined strengthening effect of nanocrystalline matrix and graphene nanoplatelet reinforcement on the mechanical properties of spark plasma sintered aluminum based nanocomposites
Alok Bhadauria et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and mechanical properties of in-situ nano γ-Al2O3p/A356 aluminum matrix composite
Tuo Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Simultaneous refinement and modification of the eutectic Si in hypoeutectic Al-Si alloys achieved via the addition of SiC nanoparticles
Dapeng Jiang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Synergistic effect of ultrasonic melt treatment and fast cooling on the refinement of primary Si in a hypereutectic Al-Si alloy
Jae-Gil Jung et al.
ACTA MATERIALIA (2018)
Microstructural evolution and high temperature flow behaviors of a homogenized Sr-modified Al-Si-Mg alloy
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Dislocation density based model for Al-Cu-Mg alloy during quenching with considering the quench-induced precipitates
Ruichao Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Morphological transformation mechanism of eutectic Si phases in Al-Si alloys by nano-AlNp
Kaiqi Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Preparation of in situ Al3Nb-NbB2-NbC/Al inoculant and its effect on microstructures and properties of weldable Al-Cu-Mn alloy
Jinhua Ding et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effects of ultrasonic vibration treatment on particles distribution of TiB2 particles reinforced aluminum composites
Qi Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A comprehensive analysis of mechanical characteristics of carbon nanotube-metal matrix nanocomposites
M. K. Hassanzadeh-Aghdam et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanical properties of graphene and graphene-based nanocomposites
Dimitrios G. Papageorgiou et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Nanoparticle-inhibited growth of primary aluminum in Al-10Si alloys
K. Wang et al.
ACTA MATERIALIA (2016)
Synthesis of Al/TiC-Al2O3 nanocomposite by mechanical alloying and subsequent heat treatment
M. Zarezadeh Mehrizi et al.
CERAMICS INTERNATIONAL (2016)
Synthesis and characterization of Al2O3-TiC nano-composite by spark plasma sintering
Rohit Kumar et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys
Jenifer Barrirero et al.
SCRIPTA MATERIALIA (2016)
Preparation of in-situ 5 vol% TiB2 particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process
Qi Gao et al.
MATERIALS & DESIGN (2016)
Local microstructure evolution in Al 6061-T6 friction stir weld nugget enhanced by ultrasonic vibration
G. K. Padhy et al.
MATERIALS & DESIGN (2016)
Characterization of hybrid aluminum matrix composites for advanced applications - A review
Jaswinder Singh et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Solute adsorption and entrapment during eutectic Si growth in A-Si-based alloys
J. H. Li et al.
ACTA MATERIALIA (2015)
Grain refinement of Al-Si alloys by Nb-B inoculation. Part I: Concept development and effect on binary alloys
M. Nowak et al.
MATERIALS & DESIGN (2015)
Design and fabrication of functionally graded in-situ aluminium composites for automotive pistons
A. G. Arsha et al.
MATERIALS & DESIGN (2015)
Controlling Phase Growth During Solidification by Nanoparticles
Lian-Yi Chen et al.
MATERIALS RESEARCH LETTERS (2015)
Microstructural characteristics, mechanical and wear behaviour of aluminium matrix hybrid composites reinforced with alumina, rice husk ash and graphite
Kenneth Kanayo Alaneme et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2015)
Preparation of Al2O3/TiC micro-composite ceramic tool materials by microwave sintering and their microstructure and properties
Yu Cheng et al.
CERAMICS INTERNATIONAL (2014)
Review of Microstructure Evolution in Hypereutectic Al-Si Alloys and its Effect on Wear Properties
Vijeesh V. K. Narayan Prabhu
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2014)
Rapid control of phase growth by nanoparticles
Lian-Yi Chen et al.
NATURE COMMUNICATIONS (2014)
Structural and mechanical properties of Ni60Nb40 amorphous alloy particle reinforced Al-based composites produced by microwave-assisted rapid sintering
S. Jayalakshmi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Overflowing phenomenon during ultrasonic treatment in Al-Si alloys
Yu-bo Zhang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Effects of T6 heat treatment on the microstructure, tensile properties, and fracture behavior of the modified A356 alloys
Man Zhu et al.
MATERIALS & DESIGN (2012)
Reaction pathways, activation energies and mechanical properties of hybrid composites synthesized in-situ from Al-TiO2-C powder mixtures
Heguo Zhu et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Ultrafine grains and the Hall-Petch relationship in an Al-Mg-Si alloy processed by high-pressure torsion
Aicha Loucif et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of mischmetal modification treatment on the microstructure, tensile properties, and fracture behavior of Al-7.0%Si-0.3%Mg foundry aluminum alloys
Man Zhu et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Effect of rapid solidification on mechanical properties of a lead free Sn-3.5Ag solder
R. M. Shalaby
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
The effect of solute on ultrasonic grain refinement of magnesium alloys
M. Qian et al.
JOURNAL OF CRYSTAL GROWTH (2010)
Brazing of Si3N4 with amorphous Ti40Zr25Ni15Cu20 filler
Jiasheng Zou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
A new nucleation mechanism of primary Si by like-peritectic coupling of AlP and Al4C3 in near eutectic Al-Si alloy
Lina Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Structure, thermal and mechanical properties of in situ Al-based metal matrix composite reinforced with Al2O3 and TiC submicron particles
P Yu et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model
MX Zhang et al.
ACTA MATERIALIA (2005)
Effect of new Al-P-Ti-TiC-Y modifier on primary silicon in hypereutectic Al-Si alloys
QC Jiang et al.
MATERIALS LETTERS (2005)