Related references
Note: Only part of the references are listed.Optimization of process parameters in turning of aluminum alloy using response surface methodology
C. Veera Ajay et al.
MATERIALS TODAY-PROCEEDINGS (2021)
The effects of Cr addition on microstructure, hardness and tensile properties of as-cast Al-3.8wt.%Cu-(Cr) alloys
Thiago M. Ribeiro et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement
Davor Stanic et al.
METALS (2020)
Cutting parameters selection for sintered alloy AlSi10Mg longitudinal turning
G. Struzikiewicz et al.
MEASUREMENT (2019)
Alloys for Aeronautic Applications: State of the Art and Perspectives
Antonio Gloria et al.
METALS (2019)
Investigation on microstructural and microhardness evolution in as-cast and T6/heat-treated samples of a horizontally solidified AlSiCu alloy
Fabricio A. Souza et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
The effects of varying Mg and Si levels on the microstructural inhomogeneity and eutectic Mg2Si morphology in die-cast Al-Mg-Si alloys
Xiangzhen Zhu et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Microstructural evolution during unsteady-state horizontal solidification of Al-Si-Mg (356) alloy
J. O. Lima et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Influence of Thermal Parameters, Microstructure, and Morphology of Si on Machinability of an Al-7.0 wt.% Si Alloy Directionally Solidified
Cassio A. P. Silva et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
A Statistical Study on the Dry Wear and Friction Characteristics of Al-12.6Si-3Cu-(2-2.6wt. %) Ni Piston Alloys
B. Sunil et al.
MATERIALS TODAY-PROCEEDINGS (2018)
3D imaging and quantification of porosity and intermetallic particles in strontium modified Al-Si alloys
Mario De Giovanni et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of transition elements on the microstructure and tensile properties of Al-12Si alloy cast under ultrasonic melt treatment
Jae-Gil Jung et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of the T6 Heat Treatment on Microhardness of a Directionally Solidified Aluminum-Based 319 Alloy
Igor Alexsander Barbosa Magno et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)
Machining of aluminum alloys: a review
Mario C. Santos et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effect of solution time in T6 heat treatment on microstructure and hardness of a directionally solidified Al-Si-Cu alloy
Thiago A. Costa et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Cellular/dendritic arrays and intermetallic phases affecting corrosion and mechanical resistances of an Al-Mg-Si alloy
Crystopher Brito et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The Influence of Austempering Conditions on the Machinability of a Ductile Iron
Armindo Werlang Filho et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Ageing characteristics and high-temperature tensile properties of Al-Si-Cu-Mg alloys with micro-additions of Cr, Ti, V and Zr
S. K. Shaha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of Mn addition on Fe-rich intermetallics morphology and dry sliding wear investigation of hypereutectic Al-17.5% Si alloys
Cyrus Bidmeshki et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
EFFECT OF SILICON CONTENT ON MACHINABILITY OF Al-Si ALLOYS
Birol Akyuz
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2016)
High cooling rate cells, dendrites, microstructural spacings and microhardness in a directionally solidified Al-Mg-Si alloy
Crystopher Brito et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Microstructural, mechanical and electrical characterization of directionally solidified Al-Si-Mg eutectic alloy
Yusuf Kaygisiz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert
Mohsen Marani Barzani et al.
MEASUREMENT (2015)
Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys
Crystopher Brito et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Effect of cooling rate on solidification parameters and microstructure of Al-7Si-0.3Mg-0.15Fe alloy
Rui Chen et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Influence of cooling rate on the Fe intermetallic formation in an AA6063 Al alloy
A. Verma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
The effects of Mg amount on the microstructure and mechanical properties of Al-Si-Mg alloys
Musa Yildirim et al.
MATERIALS & DESIGN (2013)
The Influence of Bismuth, Antimony, and Strontium on Microstructure, Thermal, and Machinability of Aluminum-Silicon Alloy
Mohsen Marani Barzani et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Characterisation of intermetallic particles formed during solution treatment of an Al-7Si-0.4Mg-0.12Fe alloy
J. Y. Yao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Iron-containing intermetallic phases in Al-Si based casting alloys
John A. Taylor
11TH INTERNATIONAL CONGRESS ON METALLURGY & MATERIALS SAM/CONAMET 2011 (2012)
Supportive strengthening role of Cr-rich phase on Al-Si multicomponent piston alloy at elevated temperature
Yunguo Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Evaluation of machinability in turning of microalloyed and quenched-tempered steels: Tool wear, statistical analysis, chip morphology
A. Ebrahimi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Alloy composition and metal/mold heat transfer efficiency affecting inverse segregation and porosity of as-cast Al-Cu alloys
Alexandre P. Boeira et al.
MATERIALS & DESIGN (2009)
The effects of aging on machinability of 6061 aluminium alloy
Halil Demir et al.
MATERIALS & DESIGN (2009)
Effect of Si content on turning machinability of Al-Si binary alloy castings
Masatsugu Kamiya et al.
MATERIALS TRANSACTIONS (2008)
Effect of metallurgical parameters on the machinability of heat-treated 356 and 319 aluminum alloys
M. Tash et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy
HA Kishawy et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
The effect of solution heat treatment and quenching rates on mechanical properties and microstructures in AlSiMg foundry alloys
L Pedersen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Solidification and precipitation behaviour of Al-Si-Mg casting alloys
QG Wang et al.
JOURNAL OF MATERIALS SCIENCE (2001)
Share Paper
