☆ 4.6 Article

Determining the Tightrope Tightening Force for Effective Fixation of the Tibiofibular Syndesmosis during Osteomeatal Synthesis of Fibula Injuries

APPLIED SCIENCES-BASEL (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Strategy of Compatible Use of Jet and Plunger Pump with Chrome Parts in Oil Well

Oleg Bazaluk et al.

Summary: This article discusses the utilization of oil gas and the use of jet pumps during oil field operations. By analyzing the pressure distribution along the borehole, the simultaneous application of a sucker-rod pump and a jet pump is evaluated. Mathematical methods are used to calculate various parameters for both the well and the jet pump, allowing for the identification of regularities and the recommendation of optimal jet pump location. The research also proposes using electrochemical chromium plating to reinforce pump parts, ensuring reliable operation and improving the environmental condition of oil fields.

ENERGIES (2022)

Add to Collection

Article Orthopedics

Biomechanical Comparison of a Closed-Loop Double Endobutton to a Lag Screw in Fixation of Posterior Malleolar Fractures

Hakan Cici et al.

Summary: This study aimed to biomechanically compare three different fixation methods for posterior malleolar fractures and found that the closed-loop double endobutton technique was biomechanically superior to anterior to posterior or posterior to anterior screw fixation techniques.

JOURNAL OF FOOT & ANKLE SURGERY (2022)

Add to Collection

Article Orthopedics

Three internal fixation methods for Danis-Weber-B distal fibular fractures: A biomechanical comparison in an osteoporotic fibula model

Marianne Hollensteiner et al.

Summary: A common agreement for the surgical treatment of osteoporotic ankle fractures has not been defined yet. This study evaluated the mechanical stability of locked and conventional plates on osteoporotic Danis-Weber-B-fibula fracture models. The results showed that although no overall mechanical superiority was found, the locking plate groups exhibited higher shear and rotational stability compared to the neutralization plate group.

FOOT AND ANKLE SURGERY (2022)

Add to Collection

Article Medicine, General & Internal

Evidence-Based Surgical Treatment Algorithm for Unstable Syndesmotic Injuries

Markus Regauer et al.

Summary: The surgical treatment of unstable syndesmotic injuries remains controversial, with no widely accepted guidelines. Various controversies exist surrounding screw fixation versus dynamic fixation, the use of reduction clamps, open versus closed reduction, and the role of the posterior malleolus and anterior inferior tibiofibular ligament (AITFL). An evidence-based surgical treatment algorithm is developed based on the literature, emphasizing the importance of anatomic reduction and flexible dynamic stabilization techniques whenever possible. Repair and augmentation of the unstable AITFL are also recommended.

JOURNAL OF CLINICAL MEDICINE (2022)

Add to Collection

Article Chemistry, Physical

Zn based hydroxyapatite based coatings deposited on a novel FeMoTaTiZr high entropy alloy used for bone implants

Mirela M. Codescu et al.

Summary: In this paper, a novel biocompatible alloy, FeMoTaTiZr, was functionalized with hydroxyapatite-based coatings (HAP) to enhance biocompatibility, bioactivity, and corrosion resistance for bone implants. The HAP coatings were doped with a small amount of Zn to confer antibacterial properties. Experimental results showed that the addition of Zn significantly increased the roughness of the coated substrate.

SURFACES AND INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Analytical Modeling of the Interaction of a Four Implant-Supported Overdenture with Bone Tissue

Bohdan Pelekhan et al.

Summary: An interdisciplinary approach is crucial in solving implantology problems. This study developed a mathematical model and methodology to analyze the mechanics of a complete overdenture based on a bar and four implants. The results provide insights into the strength of the implants and bone, and recommendations for the design and load distribution of overdentures.

MATERIALS (2022)

Add to Collection

Article Critical Care Medicine

The influence of biomechanical stability on bone healing and fracture-related infection: the legacy of Stephan Perren

Andrew L. Foster et al.

Summary: Bone healing is a complex process influenced by various biological and biomechanical factors. Construct stability is crucial for preventing and treating fracture-related infections. Stephan Perren's theories have had a profound impact on surgical techniques and implant development for the past 50 years.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2021)

Add to Collection

Review Materials Science, Composites

A review on composite patch repairs and the most important parameters affecting its efficiency and durability

Sirvan Mohammadi et al.

Summary: Repairing with composite patches is a common and effective method to extend the service life of cracked components, with more structural efficiency and less damage to the structure.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2021)

Add to Collection

Article Mining & Mineral Processing

Research into technology of fastening the mine workings in the conditions of unstable masses

Azamat Matayev et al.

Summary: The research focused on determining the rock stability in a mine in Kazakhstan and suggested using a combination of rock bolts and shotcrete as the most rational type of fastening. This method was found to decrease material consumption and cost, while increasing reliability and productivity in the mine workings.

MINING OF MINERAL DEPOSITS (2021)

Add to Collection

Article

Intramedullary fixation of fibula fractures: A systematic review

Henrik C. Bäcker et al.

Journal of Clinical Orthopaedics and Trauma (2021)

Add to Collection

Article Materials Science, Biomaterials

Improved in vivo osseointegration and degradation behavior of PEO surface-modified WE43 magnesium plates and screws after 6 and 12 months

Carsten Rendenbach et al.

Summary: The study compared the degradation behavior of WE43 plate systems with and without PEO surface modification, finding that PEO surface modification improved osseointegration and significantly reduced the degradation rate within the first six months in vivo.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Health Care Sciences & Services

Mathematical Modelling of Destabilization Stress Factors of Stable-Elastic Fixation of Distal Trans- and Suprasyndesmotic Fibular Fractures

Andriy Chuzhak et al.

Summary: The study investigated the treatment of unstable ankle injuries using internal nails and elastic threads, determining optimal tension forces and the impact of foot rotation on thread tension.

JOURNAL OF HEALTHCARE ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Stress Analysis in Damaged Pipeline with Composite Coating

Maciej Dutkiewicz et al.

Summary: This paper investigates the distribution of stresses near damage in the form of axial surface cracks in a pipeline reinforced with a spiral-wound composite coating. The authors utilized the homogenization method and the finite element method to analyze the effective elastic characteristics and solve the deformation problem, respectively. Results show that the stress state of the coated intact pipe under pressure is influenced by the geometry of the capacity strip and the component composition of the heterogeneous coating.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Orthopedics

Minimally invasive plate osteosynthesis using the oblong hole of a locking plate for comminuted distal fibular fractures

Young Uk Park et al.

Summary: The MIPO technique using the oblong hole of a locking plate achieved satisfactory restoration of length and rotation, bone union, and clinical outcomes for comminuted distal fibular fractures. Postoperative radiographs showed well-aligned ankle mortise with fibular length restoration, and the mean Olerud-Molander ankle score was 82.1 +/- 10.7 at a mean of 27.2 months.

JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Biomechanical Comparison of a Novel Implant and Commercial Fixation Devices for AO/OTA 43-C1 Type Distal Tibial Fracture

Shun-Ping Wang et al.

Summary: Based on finite element analysis, the Aplus Asia Distal Lateral Tibial Locking Plate showed better stabilization and less soft tissue damage compared to the anterolateral plate in simulating distal tibia fractures.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Review Energy & Fuels

A Technology of Hydrocarbon Fluid Production Intensification by Productive Stratum Drainage Zone Reaming

Oleg Bazaluk et al.

Summary: This paper proposes a new technology to increase fluid production, especially hydrocarbons, by increasing the wellbore diameter, drilling large diameter circular recesses in planes perpendicular to the well axis, and destroying rock mass between the recesses with axial loads. Numerical analysis supports the possibility of increasing well diameter reaming twenty times, and a special tool has been developed for drilling. The advantage of this technology is its low energy consumption.

ENERGIES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Strength Analysis of a Two-Layer PETF-Concrete Column with Allowance for Contact Interaction between Layers

Andrii Velychkovych et al.

Summary: This article focuses on the mechanical recycling of polymer wastes, specifically developing a laminated concrete column made of recycled PETF. The study involves mechanical and mathematical modeling of the column's behavior under operational load, highlighting the significant impact that contact pressure between layers can have on load-bearing capacity. Overall, a method for engineering assessment of laminated columns' load-bearing capacity was developed.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Philosophy

Humanization of Virtual Communication: from Digit to Image

Inna Khmel

Summary: This study focuses on identifying the mechanisms of communication humanization in the virtual environment with the help of new signs, while also analyzing the factors that limit emotional connections in digital communication using written signs. The essential role of nonverbal signs and symbols in overcoming alienation and promoting more human communication in the interactive sphere is highlighted as a scientific novelty. Understanding new signs and symbols in the context of socio-cultural issues of the current age enhances individual integrity and uniqueness.

PHILOSOPHY AND COSMOLOGY-FILOSOFIYA I KOSMOLOGIYA (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Development of Full-Strength Elastic Element Section with Open Shell

I. P. Shats'kyi et al.

Summary: The investigation aims to improve the performance properties of slotted shell elastic elements by designing open shell, deformable filler, and rigid pistons to enhance retention and vibrations damping. The study introduced efficient design procedures for the slotted shell elastic elements with varying shell thickness, and established analytical expressions for determining open shell thickness, leading to a 70% increase in compliance compared to prototype compliance and 57% decrease in material consumption.

STRENGTH OF MATERIALS (2021)

Add to Collection

Article Mining & Mineral Processing

Mathematical modelling of thermal stresses within the borehole walls in terms of plasma action

Anatolii Bulat et al.

Summary: The study focused on developing a mathematical model to analyze thermal and mechanical fields in rock during plasma-based action on borehole walls, with findings indicating that low-temperature plasma can induce thermal compressing stresses in the rock layer, facilitating rock fracturing. These results provide insights for assessing rock state based on plasma jet parameters and developing methods for controlling the breaking process.

MINING OF MINERAL DEPOSITS (2021)

Add to Collection

Article

On the Influence of Facing on Strength of Solids with Surface Defects

I. P. Shatskyi et al.

METALLOFIZIKA I NOVEISHIE TEKHNOLOGII (2020)

Add to Collection

Article Orthopedics

Better outcome for suture button compared with single syndesmotic screw for syndesmosis injury: five-year results of a randomized controlled trial

B. W. Raeder et al.

BONE & JOINT JOURNAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Flexible Coating on the Limit Equilibrium of a Spherical Shell with Meridional Crack

I. P. Shatskyi et al.

MATERIALS SCIENCE (2020)

Add to Collection

Proceedings Paper Geosciences, Multidisciplinary

Polymer concrete and fibre concrete as efficient materials for manufacture of gear cases and pumps

Kassym Yelemessov et al.

II INTERNATIONAL CONFERENCE ESSAYS OF MINING SCIENCE AND PRACTICE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Stressed state of laminated interference-absorption filter under local loading

L. Ya Ropyak et al.

FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

ANALYSIS OF MATERIALS AND MODERN TECHNOLOGIES FOR PDC DRILL BIT MANUFACTURING

L. Ya Ropyak et al.

USPEKHI FIZIKI METALLOV-PROGRESS IN PHYSICS OF METALS (2020)

Add to Collection

Article Engineering, Civil

Contact phenomena modeling in biological structures on the example of the implant-bone

Marcin Zaczyk et al.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2019)

Add to Collection

Article Engineering, Biomedical

The influence of gap size on the development of fracture union with a micro external fixator

Richard Meeson et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

Add to Collection

Proceedings Paper Energy & Fuels

Modelling and improvement of the design of hinged centralizer for casing

I. Shatskyi et al.

INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI (2019)

Add to Collection

Article Orthopedics

Syndesmosis and Syndesmotic Equivalent Injuries in Tibial Plafond Fractures

Justin M. Haller et al.

JOURNAL OF ORTHOPAEDIC TRAUMA (2019)

Add to Collection

Article Engineering, Multidisciplinary

NUMERICAL STUDY ON HEAT TRANSFER IN MULTILAYERED STRUCTURES OF MAIN GEOMETRIC FORMS MADE OF DIFFERENT MATERIALS

R. M. Tatsiy et al.

JOURNAL OF THE SERBIAN SOCIETY FOR COMPUTATIONAL MECHANICS (2019)

Add to Collection

Article Energy & Fuels

Analytical model of oil pipeline overground transitions, laid in mountain areas

Andriy S. Velychkovych et al.

OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2019)

Add to Collection

Review Engineering, Biomedical

Bone Mechanical Properties in Healthy and Diseased States

Elise F. Morgan et al.

ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 20 (2018)

Add to Collection

Proceedings Paper Engineering, Mechanical

Strength of Plate with the Filled Crack under Multiparameter Loading

Ivan Shatskyi et al.

ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)

Add to Collection

Review Biotechnology & Applied Microbiology

Functionally graded materials for orthopedic applications - an update on design and manufacturing

Antonella Sola et al.

BIOTECHNOLOGY ADVANCES (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Strength Optimization of a Two-Layer Coating for the Particular Local Loading Conditions

I. P. Shatskyi et al.

STRENGTH OF MATERIALS (2016)

Add to Collection

Article Medicine, General & Internal

Evaluation of the results of surgical treatment of ankle fractures with the tibiofibular syndesmosis injury

M. L. Golovakha et al.

ZAPOROZHYE MEDICAL JOURNAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

LIMITING EQUILIBRIUM OF A PLATE WITH PARTIALLY HEALED CRACK

I. P. Shats'kyi

MATERIALS SCIENCE (2015)

Add to Collection

Review Rheumatology

Fracture healing: mechanisms and interventions

Thomas A. Einhorn et al.

NATURE REVIEWS RHEUMATOLOGY (2015)

Add to Collection

Article Medicine, General & Internal

Implementing tissue engineering and regenerative medicine solutions in medical implants

Dongxia Ye et al.

BRITISH MEDICAL BULLETIN (2014)

Add to Collection

Article Orthopedics

A Modified Technique for Fixation of Chronic Instability of the Distal Tibiofibular Syndesmosis Using a Wire and Button

Bing Xie et al.

JOURNAL OF FOOT & ANKLE SURGERY (2014)

Add to Collection

Review Rheumatology

Fracture healing under healthy and inflammatory conditions

Lutz Claes et al.

NATURE REVIEWS RHEUMATOLOGY (2012)

Add to Collection

Review Materials Science, Multidisciplinary

Surface Engineering for Bone Implants: A Trend from Passive to Active Surfaces

Ruggero Bosco et al.

COATINGS (2012)

Add to Collection

Article Materials Science, Characterization & Testing

Material strengthening by crack and cavity healing

V. P. Sylovanyuk et al.

STRENGTH OF MATERIALS (2011)

Add to Collection

Article Engineering, Biomedical

Nerve Conduction Studies Clinical Challenges and Engineering Solutions

Xuan Kong et al.

IEEE ENGINEERING IN MEDICINE AND BIOLOGY MAGAZINE (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Contact interaction of the crack edges in the case of bending of a plate with elastic support

IP Shats'kyi et al.

MATERIALS SCIENCE (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.