4.6 Article

Alkali-Activated Materials with Pre-Treated Municipal Solid Waste Incinerator Bottom Ash

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Comparative study of hazelnut-shell biomass ash and metakaolin to improve the performance of alkali-activated concrete: A sustainable greener alternative

Umit Yurt et al.

Summary: Recent studies in the construction sector have highlighted the importance of using environmentally harmful wastes in conjunction with building materials to promote environmental sustainability. Utilizing waste materials in cement reduces its usage and leads to economic and ecological benefits through the production of sustainable composite materials. Additionally, utilizing hazelnut shell ash (HA) as a mineral additive in cementless concrete shows potential in improving its abrasion resistance.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Materials Science, Multidisciplinary

Novel one-part alkali-activated binder produced with coffee husk ash

Felipe Silva Lima et al.

Summary: In this study, a new alkaline activator, coffee husk ash, was generated by calcining coffee husk. The coffee husk ash exhibited high alkali content, low organic matter content, and good solubility/pH in water. When combined with blast-furnace slag, the coffee husk ash showed high activity and formed hydrated products in the mixture.

MATERIALS LETTERS (2022)

Proceedings Paper Materials Science, Multidisciplinary

Identification and characterization of faujasite zeolite phase in alkali activated class F fly ash

Jihane Moudar et al.

Summary: This paper focuses on the identification and characterization of the Faujasite-Zeolite phase resulting from the alkaline activation of Fly Ash (FA) using sodium hydroxide (NaOH). The synthesis of the material considered the liquid/solid ratio and the concentration of the alkaline solution as key process parameters. Various techniques, including X-ray diffraction, Fourier-transform infrared spectroscopy, and thermogravimetric analysis, were used to evaluate the characteristics of the synthesized zeolite. The results revealed the presence of new products, such as Faujasite.

MATERIALS TODAY-PROCEEDINGS (2022)

Review Construction & Building Technology

Alkali-activated and geopolymer materials developed using innovative manufacturing techniques: A critical review

H. S. Gokce et al.

Summary: By utilizing different production techniques like single-part production, pre-setting pressure and hot pressing, two-stage concreting, and 3D printing, geopolymers and alkali-activated materials can be manufactured for construction applications to replace conventional concrete. It is essential to carefully select and tailor the manufacturing methodology to overcome application problems and achieve eco-efficiency and superior engineering properties. The distinctive benefits of these materials, including rapid solidification, cost savings, resource conservation, energy consumption reduction, and lower carbon footprint, make them strong contenders in various construction applications.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Chemistry, Multidisciplinary

Ternary Mixes of Self-Compacting Concrete with Fly Ash and Municipal Solid Waste Incinerator Bottom Ash

B. Simoes et al.

Summary: This study evaluates the potential of using fly ash and municipal solid waste incinerator bottom ash as partial substitutes for cement in producing self-compacting concrete mixes. The experiment found a significant decline in both mechanical and durability-related performances with 60% substitution, mainly due to the chemical reaction of aluminum corrosion. However, workability properties remained unaffected.

APPLIED SCIENCES-BASEL (2021)

Article Construction & Building Technology

Fresh and hardened properties of geopolymer binder using ground high magnesium ferronickel slag with fly ash

Jhutan Chandra Kuri et al.

Summary: The study evaluated the effect of using GFNS with fly ash in geopolymers, showing that GFNS can accelerate reaction rates, reduce setting time, and increase compressive strength. SEM images and EDS analysis indicated that the application of GFNS does not affect soundness, while the N-M-A-S-H gel contributes to the strength development of geopolymers.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

A mix design method of fly ash geopolymer concrete based on factors analysis

Chenchen Luan et al.

Summary: This study proposed a new mix design method for geopolymer concrete, specifically low calcium fly ash geopolymer concrete, which allows for achieving high strength and excellent workability simultaneously. The workability is mainly influenced by the water content, while strength is affected by the water to alkaline activator ratio.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Mortars with alkali-activated municipal solid waste incinerator bottom ash and fine recycled aggregates

S. Casanova et al.

Summary: The study found that using municipal solid waste incinerator bottom ash and recycled concrete aggregates in the production of alkali-activated mortars can lead to issues such as hydrogen gas generation, expansion, and performance decline. Low stability in high relative humidity settings due to leaching of highly soluble compounds and further performance decline in mixes containing recycled aggregates were also observed. Alkali activated municipal solid waste incinerator bottom ash showed fast carbonation but also considerable strength enhancement.

JOURNAL OF CLEANER PRODUCTION (2021)

Review Chemistry, Physical

Concrete Strengthening by Introducing Polymer-Based Additives into the Cement Matrix-A Mini Review

Weronika Kujawa et al.

Summary: Modern types of concrete are composed of aggregates, cement, water, and optional additives and admixtures, with polymer additives showing promise in significantly altering the properties of concrete and mortar. The most popular polymer additives currently include superplasticizers, latexes, and redispersible powders. Additionally, research on polymer fibers and recycled polymers is being conducted to enhance the resistance to cracking in concrete-based composite admixtures.

MATERIALS (2021)

Article Crystallography

Effects of Fluorogypsum and Flue-Gas Desulfurization Gypsum on the Hydration and Hardened Properties of Alkali Slag Cement

Cheng Wang et al.

Summary: The influence of different types of waste gypsum (FG and FGD) on the properties of alkali slag cement was investigated. It was found that both types of gypsum prolonged the setting time of the cement paste and increased compressive strength, with FG having a more significant effect. The increase in gypsum content promoted the production of ettringite and led to more abundant hydration products, resulting in improved cement properties.

CRYSTALS (2021)

Article Green & Sustainable Science & Technology

Alkali activation of bottom ash from municipal solid waste incineration: Optimization of NaOH- and Na 2SiO3-based activators

R. Carvalho et al.

Summary: The study demonstrates the potential to valorize municipal solid waste incinerator bottom ashes in the Construction industry, reducing environmental pressure from the cement industry. Bottom ash specimens exhibited fast carbonation and significant strength increase, although performance declined under certain conditions; further mix design optimization offers significant potential for the manufacture of industry-fit construction materials.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Effective and sustainable use of municipal solid waste incineration bottom ash in concrete regarding strength and durability

N. M. Alderete et al.

Summary: The research explores the use of MSWI bottom ash as a substitute for Portland cement in concrete, leading to a well-performing concrete mix that reduces carbon emissions from cementitious products. This promising path of utilizing waste products in concrete increases sustainability and environmental impact assessments further support its viability.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Chemistry, Multidisciplinary

Alkali-Activated Binders Using Bottom Ash from Waste-to-Energy Plants and Aluminium Recycling Waste

Alex Maldonado-Alameda et al.

Summary: This study evaluated the potential of weathered bottom ash and a secondary aluminium recycling process by-product as precursors for alkali-activated binders. The results showed that increasing NaOH concentration and PV content led to higher porosity and lower compressive strength in the obtained AABs.

APPLIED SCIENCES-BASEL (2021)

Article Construction & Building Technology

Influence of the geopolymer formulation on the endogeneous shrinkage

Julien Archez et al.

Summary: The study investigated the shrinkage of geopolymer materials, showing that alkaline solution plays a key role in controlling shrinkage. Additives were found to reduce shrinkage, with normalized sand having the highest impact. The increase of liquid to solid ratio was proven to correlate with the increase of shrinkage.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Review Engineering, Environmental

Treatment of municipal solid waste incineration fly ash: State-of-the-art technologies and future perspectives

Yuying Zhang et al.

Summary: Municipal solid waste incineration (MSWI) fly ash is considered hazardous waste that requires specific treatment. In recent years, there has been interest in developing low carbon and sustainable treatment technologies for MSWI fly ash to maximize benefits. This review highlights innovative technologies, resource utilization approaches, and future perspectives for MSWI fly ash management.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Development Studies

Essential for what? A global social reproduction view on the re-organisation of work during the COVID-19 pandemic

Sara Stevano et al.

Summary: This article explores the concept of essential work from a global feminist social reproduction perspective, showing that its meaning is more ambiguous and politicized than it may appear. While essential work can be used as a basis to reclaim the value of socially reproductive work, its transformative potential hinges on the possibility to encompass the most precarious and transnational dimensions of (re)production.

CANADIAN JOURNAL OF DEVELOPMENT STUDIES-REVUE CANADIENNE D ETUDES DU DEVELOPPEMENT (2021)

Review Environmental Sciences

Emerging trends in municipal solid waste incineration ashes research: a bibliometric analysis from 1994 to 2018

Syieluing Wong et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Article Construction & Building Technology

Use of pretreatment to prevent expansion and foaming in high-performance MSWI bottom ash alkali-activated mortars

Guodong Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Influence of NaOH content on the alkali conversion mechanism in MSWI bottom ash alkali-activated mortars

Guodong Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Dust filter of secondary aluminium industry as raw material of geopolymer foams

D. Eliche-Quesada et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Review Green & Sustainable Science & Technology

Properties of fresh and hardened fly ash/slag based geopolymer concrete: A review

Peng Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Construction & Building Technology

Fresh, strength and microstructure properties of geopolymer concrete incorporating lime and silica fume as replacement of fly ash

Shaswat Kumar Das et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Article Construction & Building Technology

Pre-treatment and utilisation of municipal solid waste incineration bottom ashes towards a circular economy

Aneeta Mary Joseph et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Multidisciplinary

Evolution of zeolite crystals in geopolymer-supported zeolites: effects of composition of starting materials

Hammad R. Khalid et al.

MATERIALS LETTERS (2019)

Article Construction & Building Technology

Use of slaked lime and Portland cement to improve the resistance of MSWI bottom ash-GBFS geopolymer concrete against carbonation

Guodong Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Metakaolin-based geopolymer mortars with different alkaline activators (Na+ and K+)

Thais da Silva Rocha et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix

Ampol Wongsa et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Construction & Building Technology

Municipal incinerated bottom ash use as a cement component in concrete

Ciaran J. Lynn et al.

MAGAZINE OF CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Influence of fly ash on the pore structure and shrinkage characteristics of metakaolin-based geopolymer pastes and mortars

Tao Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Effect of Na2O content, SiO2/Na2O molar ratio, and curing conditions on the compressive strength of FA-based geopolymer

Young-Keun Cho et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Effect of high dosage lignosulphonate and naphthalene sulphonate based plasticizer usage on micro concrete properties

Ilker Bekir Topcu et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Engineering, Environmental

Geoenvironmental weathering/deterioration of landfilled MSWI-BA glass

Yunmei Wei et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

Article Construction & Building Technology

Natural carbonation of aged alkali-activated slag concretes

Susan A. Bernal et al.

MATERIALS AND STRUCTURES (2014)

Article Construction & Building Technology

Compatibility between superplasticizer admixtures and cements with mineral additions

Olga Burgos-Montes et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Materials Science, Ceramics

Ambient Temperature Drying Shrinkage and Cracking in Metakaolin-Based Geopolymers

Carsten Kuenzel et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)

Article Engineering, Environmental

Properties of municipal solid waste incineration ashes with respect to their separation temperature

Martin Keppert et al.

WASTE MANAGEMENT & RESEARCH (2012)

Article Construction & Building Technology

The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load

Alaa M. Rashad et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Chemistry, Physical

Generation of hydrogen from aluminum and water - Effect of metal oxide nanocrystals and water quality

Hong-Wen Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Engineering, Chemical

The role of particle technology in developing sustainable construction materials

John L. Provis et al.

ADVANCED POWDER TECHNOLOGY (2010)

Article Chemistry, Physical

Application of activated aluminum powder for generation of hydrogen from water

Valery Rosenband et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Engineering, Environmental

Understanding the chemical and mineralogical properties of the inorganic portion of MSWI bottom ash

A. P. Bayuseno et al.

WASTE MANAGEMENT (2010)

Review Materials Science, Multidisciplinary

Geopolymer technology:: the current state of the art

P. Duxson et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Article Chemistry, Physical

The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers

P. Duxson et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)

Article Construction & Building Technology

Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres

F Puertas et al.

CEMENT AND CONCRETE RESEARCH (2003)