4.7 Article

Ultralight, Mechanically Enhanced, and Thermally Improved Graphene-Cellulose-Polyethyleneimine Aerogels for the Adsorption of Anionic and Cationic Dyes

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Pollutant decontamination by polyethyleneimine-engineered agricultural waste materials: a review

Alexander Nti Kani et al.

Summary: The direct discharge of untreated contaminants into global water systems has threatened global water security, prompting scientists to develop various methods for pollutant removal. Polyethyleneimine-functionalized agricultural waste materials have emerged as promising and cost-effective adsorbents with high adsorption capabilities, offering potential for environmentally safe pollutant sequestration.

ENVIRONMENTAL CHEMISTRY LETTERS (2022)

Article Chemistry, Physical

Fruit waste-derived cellulose and graphene-based aerogels: Plausible adsorption pathways for fast and efficient removal of organic dyes

Pratiksha Joshi et al.

Summary: This study developed a composite aerogel for the removal of organic pollutants, with ultra-light and high porosity, capable of efficiently adsorbing organic dyes. The composite aerogel provides ample transport pathways through a hydrogen bonding network, showing potential for applications in water treatment.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Multidisciplinary

Nanocellulose and Graphene Oxide Aerogels for Adsorption and Removal Methylene Blue from an Aqueous Environment

Vy T. Nguyen et al.

Summary: This study successfully prepared a composite aerogel using cellulose nanofibers and graphene oxide, which showed excellent adsorption performance and reusability, indicating great potential for application in industrial wastewater treatment.

ACS OMEGA (2022)

Article Chemistry, Multidisciplinary

Multi-mode surface plasmon resonance absorber based on dart-type single-layer graphene

Hao Chen et al.

Summary: This paper proposes a multi-mode surface plasmon resonance absorber based on dart-type single-layer graphene, which has the advantages of polarization independence, tunability, high sensitivity, and high figure of merit. The absorption effect and resonant wavelength can be dynamically tuned by adjusting the numerical values of the single-layer graphene array's structure and chemical potential.

RSC ADVANCES (2022)

Article Chemistry, Multidisciplinary

Preparation and adsorption properties of hyperbranched polyethyleneimine-cellulose nanofiber aerogel

Yanyuan Fang et al.

Summary: A novel cellulose-based aerogel with excellent adsorption capacity for CR dye was prepared and characterized, showing high porous structure and abundant amine groups. The adsorption process followed a pseudo-second-order equation and Langmuir model, with a maximum adsorption capacity of 2125.96 mg/g according to the Langmuir model.

NEW JOURNAL OF CHEMISTRY (2022)

Review Engineering, Multidisciplinary

A review of three-dimensional graphene-based aerogels: Synthesis, structure and application for microwave absorption

Dandan Zhi et al.

Summary: Graphene aerogels with unique properties have attracted considerable attention, especially in high-performance electromagnetic wave attenuation. The three-dimensional network and incorporation of other lossy materials contribute to the improvement of microwave absorption efficiency. Current research focuses on synthetic strategies, structural characteristics, and multifunctional microwave absorbing materials based on graphene aerogels.

COMPOSITES PART B-ENGINEERING (2021)

Article Multidisciplinary Sciences

A novel graphene-based micro/nano architecture with high strength and conductivity inspired by multiple creatures

Muzhi Li et al.

Summary: Inspired by natural structures and properties, a novel graphene-based micro/nano structure was proposed, leading to the fabrication of bioinspired nanocomposites with outstanding performance.

SCIENTIFIC REPORTS (2021)

Article Polymer Science

Preparation of Graphene Oxide/Cellulose Composites with Microcrystalline Cellulose Acid Hydrolysis Using the Waste Acids Generated by the Hummers Method of Graphene Oxide Synthesis

Yuanyuan Miao et al.

Summary: This study aimed to efficiently reuse waste acids from the Hummers method by using them to hydrolyze microcrystalline cellulose (MCC) and prepare GO/MCC composites. Results showed that adding 1 g of MCC resulted in the highest thermal stability and improved hydrophobicity of the composite.

POLYMERS (2021)

Article Biochemistry & Molecular Biology

Ultralight, High Capacitance, Mechanically Strong Graphene-Cellulose Aerogels

Xiuya Wang et al.

Summary: The study prepared graphene-cellulose hydrogels by a one-step hydrothermal method, followed by the preparation of porous, ultra-light, and mechanically strong graphene-cellulose aerogels through freeze-drying. These composite aerogels exhibit excellent mechanical strength and high specific capacitance, capable of bearing about 1095 times the pressure of their own weight.

MOLECULES (2021)

Article Chemistry, Multidisciplinary

Anisotropic Carbon Aerogel from Cellulose Nanofibers Featuring Highly Effective Compression Stress Transfer and Pressure Sensing

Haihong Lai et al.

Summary: This study introduces an anisotropic carbon aerogel fabricated from cellulose nanofibers with excellent compressibility and resilience, shape recovery from high compression strain, and excellent fatigue resistance. The carbon aerogel shows promising mechanical performance, stable 3D lamellar architecture, and high conductivity, making it suitable for 3D tactile sensors capturing various signals of human motions.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Freundlich Isotherm: An Adsorption Model Complete Framework

Michael Vigdorowitsch et al.

Summary: The majority of modern studies focused on interpreting experimental data based on the Freundlich isotherm overlook the importance of analytically continuing the data obtained for low and moderate adsorbate concentration/pressure regions within the Freundlich adsorption model. This study proposes a framework and algorithm-driven method to comprehensively analyze experimental data that comply with the Freundlich adsorption model, providing valuable extended information about the adsorption process. Three sets of experimental data were processed and presented according to the developed framework, illustrating the method's effectiveness.

APPLIED SCIENCES-BASEL (2021)

Article Polymer Science

Mechanically Strong, Low Thermal Conductivity and Improved Thermal Stability Polyvinyl Alcohol-Graphene-Nanocellulose Aerogel

Xiuya Wang et al.

Summary: Porous aerogel materials have low density, low thermal conductivity, and high porosity, making them ideal for heat insulation and building energy conservation. However, their poor mechanical properties can be improved through the preparation of multiple-composite aerogels like the PVA-GA-CNF ternary composite aerogel. This composite aerogel exhibits excellent mechanical properties, low thermal conductivity, and improved thermal stability, showcasing its potential for thermal insulation applications.
Article Environmental Sciences

Carbon material-immobilized ionic liquids were applied on absorption of Hg2+ from water phase

Lihan Sun et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Review Engineering, Environmental

Recent advances of 3D graphene-based adsorbents for sample preparation of water pollutants: A review

Houmei Liu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Shape recoverable and mechanically robust cellulose aerogel beads for efficient removal of copper ions

Chunxia Tang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Materials Science, Paper & Wood

Improved cellulose X-ray diffraction analysis using Fourier series modeling

Wenqing Yao et al.

CELLULOSE (2020)

Article Chemistry, Multidisciplinary

New Mussel Inspired Polydopamine-Like Silica-Based Material for Dye Adsorption

Marina Massaro et al.

NANOMATERIALS (2020)

Article Nanoscience & Nanotechnology

Flexible and Super Thermal Insulating Cellulose Nanofibril/Emulsion Composite Aerogel with Quasi-Closed Pores

Mingyao Song et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Analytical

Highly efficient removal of uranium(VI) from aqueous solution using poly(cyclotriphosphazene-co-polyethyleneimine) microspheres

Xiaoqing Xie et al.

JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY (2020)

Article Chemistry, Multidisciplinary

Effective removal of cation dyes from aqueous solution using robust cellulose sponge

Mutian Ma et al.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2020)

Article Chemistry, Physical

A super-resilient and highly sensitive graphene oxide/cellulose-derived carbon aerogel

Wenzhao Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Adsorption behavior of polyethyleneimine-carbamate linked pineapple leaf fiber for Cr(VI) removal

Supattra Tangtubtim et al.

APPLIED SURFACE SCIENCE (2019)

Article Chemistry, Multidisciplinary

Synthesis of Hierarchical Porous Carbon in Molten Salt and Its Application for Dye Adsorption

Saisai Li et al.

NANOMATERIALS (2019)

Article Materials Science, Multidisciplinary

Preparation of and research on bioinspired graphene oxide/nanocellulose/polydopamine ternary artificial nacre

Muzhi Li et al.

MATERIALS & DESIGN (2019)

Article Chemistry, Applied

Polyethyleneimine-crosslinked cellulose aerogel for combustion CO2 capture

Cheng Wang et al.

CARBOHYDRATE POLYMERS (2019)

Article Green & Sustainable Science & Technology

Study on the Preparation and Adsorption Property of Polyvinyl Alcohol/Cellulose Nanocrystal/Graphene Composite Aerogels (PCGAs)

Yan Wu et al.

JOURNAL OF RENEWABLE MATERIALS (2019)

Article Engineering, Environmental

Green Synthesis of Fe3O4/Cellulose/Polyvinyl Alcohol Hybride Aerogel and Its Application for Dye Removal

Dazhi Shen et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

Article Chemistry, Physical

An in situ grown bacterial nanocellulose/graphene oxide composite for flexible supercapacitors

Qisheng Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Electrochemistry

NiO-Fe2O3 based graphene aerogel as urea electrooxidation catalyst

Gautam Das et al.

ELECTROCHIMICA ACTA (2017)

Review Chemistry, Analytical

FTIR Spectroscopy for Carbon Family Study

Vasilica Tucureanu et al.

CRITICAL REVIEWS IN ANALYTICAL CHEMISTRY (2016)

Article Nanoscience & Nanotechnology

Cellulose Nanofibril/Reduced Graphene Oxide/Carbon Nanotube Hybrid Aerogels for Highly Flexible and All-Solid-State Supercapacitors

Qifeng Zheng et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Materials Science, Paper & Wood

CaCO3-decorated cellulose aerogel for removal of Congo Red from aqueous solution

Kai Yin Chong et al.

CELLULOSE (2015)

Article Nanoscience & Nanotechnology

Enhanced model for determining the number of graphene layers and their distribution from X-ray diffraction data

Beti Andonovic et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2015)

Article Spectroscopy

Graphene oxide and reduced graphene oxide studied by the XRD, TEM and electron spectroscopy methods

L. Stobinski et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2014)

Article Engineering, Environmental

Sorption of lead, mercury and cadmium ions in multi-component system using carbon aerogel as adsorbent

K. Kadirvelu et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Article Energy & Fuels

Characteristics of hemicellulose, cellulose and lignin pyrolysis

Haiping Yang et al.