4.7 Article

Integration of Different Graphene Nanostructures with PDMS to Form Wearable Sensors

Related references

Note: Only part of the references are listed.
Review Engineering, Electrical & Electronic

Non-Dispersive Infrared Gas Sensing Technology: A Review

Ravindra Kumar Jha

Summary: Non-dispersive infrared gas sensing (NDIR) is a unique optical sensing technique that can fingerprint and distinctly identify gases based on their absorption characteristics when interacting with IR radiation. The basic components of an NDIR gas sensor include an IR emitter, detector, optical filter, gas cell, and circuit elements for signal processing. Proper selection of components is crucial for targeted applications.

IEEE SENSORS JOURNAL (2022)

Article Chemistry, Analytical

Graphene as a Piezoresistive Material in Strain Sensing Applications

Farid Sayar Irani et al.

Summary: This review provides an in-depth overview of the latest studies on graphene and its strain sensing mechanism, as well as various applications. The article starts by describing the fundamental properties, synthesis techniques, and characterization methods of graphene. It then discusses various types of graphene-based strain sensors and demonstrates the challenges in material synthesis, device fabrication, and integration. Finally, the review describes several applications of graphene-based strain sensors.

MICROMACHINES (2022)

Article Chemistry, Applied

Fabrication of hierarchical Ru/PEDOT:PSS/Ti3C2Tx nanocomposites as electrochemical sensing platforms for highly sensitive Sudan I detection in food

Lu Deng et al.

Summary: A promising electrochemical sensing platform was fabricated with Ti3C2Tx, PEDOT:PSS, and RuNPs, showing wide detection range and high sensitivity for Sudan I detection. This platform has potential applications in food safety testing.

FOOD CHEMISTRY (2022)

Article Engineering, Biomedical

Properties and Applications of PDMS for Biomedical Engineering: A Review

Ines Miranda et al.

Summary: This review provides an overview of the properties of PDMS and its applications in the field of micro and nanoengineering. PDMS is widely used in biomedical applications due to its excellent optical, electrical, and mechanical properties, as well as biocompatibility. The introduction of the soft-lithography technique has facilitated the rapid prototyping of micro and nanostructures using PDMS, leading to advances in microfluidics, electronics, and biomedicine.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2022)

Article Chemistry, Multidisciplinary

A Flexible and Regenerative Aptameric Graphene-Nafion Biosensor for Cytokine Storm Biomarker Monitoring in Undiluted Biofluids toward Wearable Applications

Ziran Wang et al.

Summary: This study overcomes the challenge of high background interference in measuring cytokine levels in human biofluids by developing a flexible and regenerative biosensor, capable of detecting cytokine storm biomarkers in undiluted human biofluids.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Environmental Sciences

Graphene oxide nanocomposites based room temperature gas sensors: A review

G. J. Thangamani et al.

Summary: This review provides a state-of-the-art overview of chemiresistive gas sensors, focusing on the recent advancements and advantages of graphene oxide (GO) nanocomposites-based chemiresistive gas sensors.

CHEMOSPHERE (2021)

Review Materials Science, Biomaterials

Advanced materials-integrated electrochemical sensors as promising medical diagnostics tools: A review

Katarina Nemcekova et al.

Summary: This work presents the increasing connection between electrochemical sensors and various modern applications, emphasizing the use of advanced materials to enhance performance, miniaturization, and portability of sensing devices. It provides an overview of recent developments in (bio)sensing platforms using different detection modes, including portable, noninvasive, wireless, and self-driven devices for health monitoring purposes. The diagnostics of selected biomarkers, bacteria, and viruses are demonstrated as well.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Article Instruments & Instrumentation

Screen-printed flexible negative temperature coefficient temperature sensor based on polyvinyl chloride/carbon black composites

Yao Xiao et al.

Summary: The flexible NTC temperature sensor showed high sensitivity, excellent linearity, and fast response time when measuring temperatures between 18 and 44 degrees Celsius. The tunneling effect was used to explain the sensor's characteristics and it demonstrated potential for real-time temperature monitoring.

SMART MATERIALS AND STRUCTURES (2021)

Review Polymer Science

Review of Graphene-Based Textile Strain Sensors, with Emphasis on Structure Activity Relationship

Rufang Yu et al.

Summary: Graphene-based textile strain sensors can be prepared through conductive textiles spinning and weaving techniques or depositing graphene-based materials on the surface of textiles. The gauge factor (GF) value of sensor is a key evaluation indicator, with trends in recoverable and unrecoverable deformation stages. The main challenge lies in limited studies on application capacity, with focus on washability and lack of consideration for other environmental factors.

POLYMERS (2021)

Article Materials Science, Multidisciplinary

Production and characterization of Graphene Nanoplatelet-based ink for smart textile strain sensors via screen printing technique

Fabrizio Marra et al.

Summary: Wearable systems are increasingly attractive in various application areas, with smart clothes based on fabric-integrated strain sensors showing promise but also presenting challenges. The development of smart textiles with high sensitivity, wearability, and stable response is still a challenge, and the use of graphene nanoplatelets in a water-based ink for strain sensors on synthetic fabric shows interesting potential for applications such as monitoring respiratory and heart rates.

MATERIALS & DESIGN (2021)

Article Materials Science, Paper & Wood

Flexible textile ion sensors based on reduced graphene oxide/fullerene and their potential applications of sweat characterization

Jian Zhang et al.

Summary: A strategy of modifying cotton fabrics using graphene oxide and aminofullerene and then preparing flexible reduced GO/fullerene fabric-based ion sensors by chemical reduction method was proposed. The sensors showed different resistivity to ions based on their characteristics, exhibited good sensitivity even at low ion concentrations, and maintained stability after repeated bending. This work lays the foundation for designing the next generation of intelligent ion sensors with high sensitivity and flexibility.

CELLULOSE (2021)

Article Engineering, Environmental

Wearable piezoresistive pressure sensors based on 3D graphene

Minghui Cao et al.

Summary: Wearable piezoresistive sensors based on three-dimensional graphene offer advantages such as simple preparation, low power consumption, and convenient signal acquisition, showing great potential in applications like human motion detection and health monitoring.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Analytical

GNP-CeO2-polyaniline hybrid hydrogel for electrochemical detection of peroxynitrite anion and its integration in a microfluidic platform

Vijayesh Kumar et al.

Summary: An electrochemical sensor for detecting peroxynitrite anion was developed using a nanocomposite of graphene nanoplatelets and cerium oxide incorporated into conducting hydrogels. The sensor showed high sensitivity and a linear range for peroxynitrite detection, with a microfluidic system enabling continuous monitoring of low sample volumes. The hybrid hydrogel-based microfluidic device provides a reliable assessment of peroxynitrite levels, showing potential for understanding oxidative stress-related disease mechanisms.

MICROCHIMICA ACTA (2021)

Article Materials Science, Multidisciplinary

Platinum/graphene nanoplatelets/silicone rubber composites as polymer electrolyte membrane fuel cell catalysts

Aysenur Ozturk et al.

Summary: Two commercial graphene nanoplatelets were utilized in this study to support platinum catalyst, with one being nitrogen-doped. The Pt/G2/PDMS composite showed the best performance in the PEM fuel cell, attributed to its higher surface area and pore volume provided by graphene nanoplatelets, as well as the oxygen permeability and hydrophobicity of the PDMS polymer as the catalyst binder.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Materials Science, Multidisciplinary

Recent advances of flexible sensors for biomedical applications

Guozhen Shen

Summary: Flexible sensors play a crucial role in designing personal health diagnosis and treatment systems, with applications ranging from skin-attached devices to implantable devices. Future research efforts will focus on addressing the challenges of flexible sensors and advancing the development of biomedical devices.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

Article Chemistry, Analytical

A stretchable, room-temperature operable, chemiresistive gas sensor using nanohybrids of reduced graphene oxide and zinc oxide nanorods

Dong-Bin Moon et al.

Summary: The chemiresistive gas sensor based on rGO and ZnO NRs nanohybrids shows excellent stretchability, mechanical properties, ultra-sensitive detection of gases including NO2, and high selectivity at room temperature.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Review Chemistry, Analytical

Multi-Walled Carbon Nanotubes-Based Sensors for Strain Sensing Applications

Anindya Nag et al.

Summary: This paper showcases the use of MWCNT-based sensors for strain-strain applications, highlighting their enhanced electrical, mechanical, and thermal properties. MWCNT-based sensors have proven their ability to deduce a broad spectrum of macro- and micro-scaled tensions and have been widely utilized in various applications.

SENSORS (2021)

Article Materials Science, Multidisciplinary

Recent progress in the fabrication of graphene fibers and their composites for applications of monitoring human activities

Anindya Nag et al.

Summary: This paper discusses the use of highly efficient graphene fibers and composites for human activity monitoring applications; graphene fibers are developed from carbon-based allotropes and utilized in sensor prototypes for various purposes; their exceptional mechanical and functional performances make them valuable for sensing applications.

APPLIED MATERIALS TODAY (2021)

Article Multidisciplinary Sciences

A highly stable, nanotube-enhanced, CMOS-MEMS thermal emitter for mid-IR gas sensing

Daniel Popa et al.

Summary: The gas sensor market is rapidly growing due to various socioeconomic and industrial factors, with a particular demand for high-performance MIR gas sensors in healthcare, smart homes, and the automotive sector. Researchers have developed an on-chip broadband thermal MIR source based on CMOS technology and a CNT blackbody layer, offering an ideal solution for low-cost, highly-integrated MIR spectroscopy.

SCIENTIFIC REPORTS (2021)

Article Materials Science, Ceramics

Significant strain-rate dependence of sensing behavior in TiO2@carbon fibre/PDMS composites for flexible strain sensors

Fan Zhang et al.

Summary: This study utilized TiO2 nanowires to enhance the sensitivity of CF/PDMS composite strain sensors, introducing a more porous structure to improve sensitivity and demonstrating significant strain rate dependent behavior.

JOURNAL OF ADVANCED CERAMICS (2021)

Review Biochemistry & Molecular Biology

Graphene-Based Sensors for the Detection of Bioactive Compounds: A Review

Carlos Sainz-Urruela et al.

Summary: Graphene and its derivatives have become important nanomaterials in the field of optical and electrochemical sensors due to their unique physical and chemical properties, facilitating the design of highly selective and sensitive sensors. Their presence of oxygen functional groups allows them to be easily combined with different types of inorganic nanoparticles to yield nanocomposites with enhanced sensitivity for sensor applications. Their synthesis process, functionalization routes, main properties, and challenges are summarized, providing insights on the advantages offered by graphene and its derivatives for the detection of bioactive compounds.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Article Nanoscience & Nanotechnology

Reduced Graphene Oxide-Coated Silica Nanospheres as Flexible Enzymatic Biosensors for Detection of Glucose in Sweat

Mengyi Xu et al.

Summary: A 3D flexible biosensor based on nanocomposites was developed for detecting glucose in sweat, showing high sensitivity and detection limit, making it suitable for clinical analysis.

ACS APPLIED NANO MATERIALS (2021)

Article Chemistry, Physical

CRISPR-Cas12a-driven MXene-PEDOT:PSS piezoresistive wireless biosensor

Ruijin Zeng et al.

Summary: This study introduces a CRISPR-Cas12a-based instrument-free point-of-care detection technology, which uses smartphone for visualized DNA detection results, and combines wireless sensing technology, significantly improving portability and detection sensitivity.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

Brightening up Circularly Polarized Luminescence of Monosubstituted Polyacetylene by Conformation Control: Mechanism, Switching, and Sensing

Sheng Wang et al.

Summary: This study presents luminescent monosubstituted polyacetylenes with a contracted polyene backbone, showing excellent CPL performance and capability of reversible switches by solvent and temperature. These materials can be used as a probe for quantitative detection of trifluoroacetic acid, offering a wider linear dynamic range compared to traditional methods. This work opens up new possibilities for developing novel smart CPL materials through manipulating conformational transitions.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Applied

Target specific aptamer-induced self-assembly of fluorescent graphene quantum dots on palladium nanoparticles for sensitive detection of tetracycline in raw milk

Syed Rahin Ahmed et al.

Summary: This study presents a novel sensing strategy for the rapid and label-free detection of tetracycline using aptamer-induced fluorescence fluctuation of graphene quantum dots and palladium nanoparticles, with a limit of detection of 45 ng.mL(-1). Additionally, a new synthesis method for positively charged palladium nanoparticles and green synthesis of GQDs directly from graphite has been developed. This proposed strategy offers an efficient way to detect low traces of TCs and a new technique for the development of aptamer-based sensors.

FOOD CHEMISTRY (2021)

Review Food Science & Technology

Reduced graphene oxide nanocomposite based electrochemical biosensors for monitoring foodborne pathogenic bacteria: A review

Haotian Yu et al.

Summary: This review tracks the development of reduced graphene oxide (rGO) nanocomposite materials electrochemical biosensors for the detection of foodborne pathogenic bacteria, discussing the preparation of rGO nanocomposite electrochemical biosensors and their working mechanism.

FOOD CONTROL (2021)

Article Nanoscience & Nanotechnology

E-textile based wearable thermometer from WS2-quantum dots

Abid et al.

Summary: The WS2-QD/RGO hybrid temperature sensor demonstrated excellent performance in a wide temperature range and successfully monitored human body temperature. The device is simple, flexible, cost-effective, with parameters comparable or superior to existing devices, showing promising potential for future wearable health monitoring devices.

NANOTECHNOLOGY (2021)

Review Chemistry, Analytical

A Review of the Use of Carbon Nanotubes and Graphene-Based Sensors for the Detection of Aflatoxin M1 Compounds in Milk

Jingrong Gao et al.

Summary: This paper provides a comprehensive review on the detection of aflatoxin compounds using carbon allotrope-based sensors, focusing on the utilization of carbon nanotubes and graphene for their enhanced sensitivity and selectivity. It highlights significant examples of these sensors measuring Aflatoxin M1 and Aflatoxin B1 compounds at low concentrations, while also discussing the challenges associated with current sensors in this field.

SENSORS (2021)

Review Engineering, Electrical & Electronic

Precise Blood Glucose Sensing by Nitrogen-Doped Graphene Quantum Dots for Tight Control of Diabetes

Seyyed Mojtaba Mousavi et al.

Summary: Graphene quantum dots (GQD) are novel fluorescent carbon nanomaterials based on a graphite structure, known for their high surface area and enhanced optical properties, making them ideal for special applications. The use of nitrogen-doped GQD as a novel transducer in glucose sensors has shown significant improvement in sensitivity and convenience.

JOURNAL OF SENSORS (2021)

Article Chemistry, Multidisciplinary

PDMS Sponges with Embedded Carbon Nanotubes as Piezoresistive Sensors for Human Motion Detection

Blake Herren et al.

Summary: Porous piezoresistive sensors were developed using a microwave-based rapid porogen removal technique, allowing for customization of electrical properties by varying porogen amounts and CNT loadings. Sensors with 3 wt% CNT loading demonstrated the highest piezoresistive sensitivity, while those with low porosity showed long-term durability.

NANOMATERIALS (2021)

Article Chemistry, Multidisciplinary

Development of Highly Sensitive Strain Sensor Using Area-Arrayed Graphene Nanoribbons

Ken Suzuki et al.

Summary: In this study, a basic design of area-arrayed graphene nanoribbon (GNR) strain sensors was proposed. GNRs with widths of 200 nm and above were found to be metallic conductors, while 50 nm GNRs exhibited high sensitivity. A four-point bending test revealed that the gauge factor of the 50 nm GNR was about 50, making it suitable for highly sensitive strain sensors.

NANOMATERIALS (2021)

Article Engineering, Electrical & Electronic

Flexible Printed Circuit Board as Novel Electrodes for Acoustofluidic Devices

Chao Sun et al.

Summary: The SAW-based acoustofluidic technology utilizing flexible printed circuit boards enables fast prototyping of acoustofluidic devices. By clamping interdigital electrodes onto a piezoelectric substrate, SAWs can be effectively generated, facilitating versatile applications. This technique helps reduce device footprint and save space, with low assembly requirements for rapid implementation in acoustofluidic applications.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2021)

Review Materials Science, Paper & Wood

Review of flexible strain sensors based on cellulose composites for multi-faceted applications

Ziyang Chen et al.

Summary: Flexible strain sensors based on cellulose composite materials have excellent properties and diverse functions, making them widely applicable in areas such as human health monitoring and motion detection. This paper provides a detailed comparison and discussion of the materials, preparation methods, and structures of these sensors, as well as proposed solutions to difficulties encountered in the preparation process and summaries of their sensing performance and applications.

CELLULOSE (2021)

Article Chemistry, Multidisciplinary

Performance of CNTs/GOD-Based Flexible Strain Sensors

Qiang Zhang et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2020)

Article Engineering, Electrical & Electronic

Multi-parameter paper sensor fabricated by inkjet-printed silver nanoparticle ink and PEDOT:PSS

Dimitris Barmpakos et al.

MICROELECTRONIC ENGINEERING (2020)

Review Chemistry, Analytical

Recent Progress in 3D Printed Mold-Based Sensors

Shan He et al.

SENSORS (2020)

Article Chemistry, Analytical

A photoelectrochemical sensor for highly sensitive detection of glucose based on Au-NiO1-x hybrid nanowires

Lanfang Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Review Nanoscience & Nanotechnology

Nanomaterials by design: a review of nanoscale metallic multilayers

A. Saenz-Trevizo et al.

NANOTECHNOLOGY (2020)

Article Nanoscience & Nanotechnology

Low Operating Voltage Carbon-Graphene Hybrid E-textile for Temperature Sensing

Gopika Rajan et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Multidisciplinary

Recent Advances on Graphene Quantum Dots for Bioimaging Applications

Muhammad Rizwan Younis et al.

FRONTIERS IN CHEMISTRY (2020)

Review Nanoscience & Nanotechnology

Laser-Induced Graphene: En Route to Smart Sensing

Libei Huang et al.

NANO-MICRO LETTERS (2020)

Review Chemistry, Multidisciplinary

Graphene nanoribbons: A promising nanomaterial for biomedical applications

Asha P. Johnson et al.

JOURNAL OF CONTROLLED RELEASE (2020)

Article Multidisciplinary Sciences

Printed, flexible, compact UHF-RFID sensor tags enabled by hybrid electronics

Carol L. Baumbauer et al.

SCIENTIFIC REPORTS (2020)

Article Materials Science, Multidisciplinary

A Fully Inkjet-Printed Strain Sensor Based on Carbon Nanotubes

Hsuan-Ling Kao et al.

COATINGS (2020)

Article Engineering, Electrical & Electronic

Development and Analysis of Graphene Nanoplatelets (GNPs)-Based Flexible Strain Sensor for Health Monitoring Applications

Suraj Baloda et al.

IEEE SENSORS JOURNAL (2020)

Review Engineering, Electrical & Electronic

A review on fabrication, characterization and implementation of wearable strain sensors

Nasrin Afsarimanesh et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Article Chemistry, Multidisciplinary

Flexible transparent graphene laminates via direct lamination of graphene onto polyethylene naphthalate substrates

Ismael G. Serrano et al.

NANOSCALE ADVANCES (2020)

Review Chemistry, Analytical

Principles, mechanisms, and application of carbon quantum dots in sensors: a review

Mohammad Jafar Molaei

ANALYTICAL METHODS (2020)

Article Chemistry, Multidisciplinary

A supramolecular approach for the synthesis of cross-linked ionic polyacetylene network gels

Yong Tian et al.

MATERIALS CHEMISTRY FRONTIERS (2020)

Article Engineering, Electrical & Electronic

Graphene Fiber-Based Strain-Insensitive Wearable Temperature Sensor

Mingxin Yu et al.

IEEE SENSORS LETTERS (2020)

Article Computer Science, Information Systems

Green media-aware medical IoT system

Ali Hassan Sodhro et al.

MULTIMEDIA TOOLS AND APPLICATIONS (2019)

Review Engineering, Electrical & Electronic

Recent Advances in Multifunctional Sensing Technology on a Perspective of Multi-Sensor System: A Review

Bansari Deb Majumder et al.

IEEE SENSORS JOURNAL (2019)

Review Chemistry, Analytical

Laser-Assisted Printed Flexible Sensors: A Review

Tao Han et al.

SENSORS (2019)

Article Engineering, Electrical & Electronic

IoT-based sensing system for phosphate detection using Graphite/PDMS sensors

Anindya Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Article Physics, Applied

Transparent triboelectric sensor arrays using gravure printed silver nanowire electrodes

Yongyi Peng et al.

APPLIED PHYSICS EXPRESS (2019)

Article Materials Science, Multidisciplinary

Impact of graphene nanoplatelet concentration and film thickness on vapor detection for polymer based chemiresistive sensors

Michael S. Wiederoder et al.

CURRENT APPLIED PHYSICS (2019)

Article Nanoscience & Nanotechnology

Flexible and Transparent Aluminum-Nitride-Based Surface-Acoustic-Wave Device on Polymeric Polyethylene Naphthalate

Leonardo Lamanna et al.

ADVANCED ELECTRONIC MATERIALS (2019)

Review Materials Science, Multidisciplinary

A Review on Size-Dependent Mechanical Properties of Nanowires

Mohammad Nasr Esfahani et al.

ADVANCED ENGINEERING MATERIALS (2019)

Review Engineering, Electrical & Electronic

Carbon nanotubes and its gas-sensing applications: A review

Tao Han et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Article Chemistry, Analytical

Hybrid polyaniline-WO3 flexible sensor: A room temperature competence towards NH3 gas

S. B. Kulkarni et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Review Chemistry, Multidisciplinary

Graphene-Based Sensors for Human Health Monitoring

Haizhou Huang et al.

FRONTIERS IN CHEMISTRY (2019)

Article Nanoscience & Nanotechnology

PDMS/Polyimide Composite as an Elastomeric Substrate for Multifunctional Laser-Induced Graphene Electrodes

Matteo Parmeggiani et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Computer Science, Hardware & Architecture

Privacy-Preserving Image Retrieval for Medical IoT Systems: A Blockchain-Based Approach

Meng Shen et al.

IEEE NETWORK (2019)

Article Chemistry, Analytical

Multifunctional Flexible Sensor Based on Laser-Induced Graphene

Tao Han et al.

SENSORS (2019)

Review Engineering, Electrical & Electronic

Design and applications of MEMS flow sensors: A review

Fatemeh Ejeian et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Article Chemistry, Physical

An integrated flexible self-powered wearable respiration sensor

Si Wang et al.

NANO ENERGY (2019)

Article Electrochemistry

Bimetallic nanowire sensors for extracellular electrochemical hydrogen peroxide detection in HL-1 cell culture

Konstantin G. Nikolaev et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2018)

Article Nanoscience & Nanotechnology

Multifunctional Wearable Electronic Textiles Using Cotton Fibers with Polypyrrole and Carbon Nanotubes

Ravi M. A. P. Lima et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Roll-to-Roll Gravure Printed Electrochemical Sensors for Wearable and Medical Devices

Mallika Bariya et al.

ACS NANO (2018)

Article Chemistry, Physical

Nitrogen-doped graphene and graphene quantum dots: A review onsynthesis and applications in energy, sensors and environment

Manpreet Kaur et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2018)

Review Materials Science, Multidisciplinary

Review on superior strength and enhanced ductility of metallic nanomaterials

I. A. Ovid'ko et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Article Engineering, Electrical & Electronic

Strain induced graphite/PDMS sensors for biomedical applications

Anindya Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Article Engineering, Electrical & Electronic

Performance analysis of flexible printed sensors for robotic arm applications

Anindya Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Article Engineering, Electrical & Electronic

A temperature-compensated graphene sensor for nitrate monitoring in real-time application

Md Eshrat E. Alahi et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Article Engineering, Electrical & Electronic

Fabrication and implementation of printed sensors for taste sensing applications

Anindya Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Review Engineering, Electrical & Electronic

Graphene and its sensor-based applications: A review

Anindya Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Article Chemistry, Analytical

Cobalt nitride nanowire array as an efficient electrochemical sensor for glucose and H2O2 detection

Fengyu Xie et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Analytical

A novel electrochemical sensor for glucose detection based on Ag@ZIF-67 nanocomposite

Wei Meng et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Review Chemistry, Analytical

Recent biomedical applications of gold nanoparticles: A review

Narges Elahi et al.

TALANTA (2018)

Article Engineering, Electrical & Electronic

3D printed mould-based graphite/PDMS sensor for low-force applications

A. Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Article Chemistry, Multidisciplinary

All-Painting Process To Produce Respiration Sensor Using Humidity-Sensitive Nanoparticle Film and Graphite Trace

Shinya Kano et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Review Chemistry, Multidisciplinary

Graphene Nanoplatelets-Based Advanced Materials and Recent Progress in Sustainable Applications

Pietro Cataldi et al.

APPLIED SCIENCES-BASEL (2018)

Review Materials Science, Multidisciplinary

Flexible strain sensors fabricated using carbon-based nanomaterials: A review

Zhe Wang et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)

Review Materials Science, Biomaterials

Review of Green Methods of Iron Nanoparticles Synthesis and Applications

Heba Mohamed Fahmy et al.

BIONANOSCIENCE (2018)

Article Engineering, Electrical & Electronic

Tactile Sensing From Laser-Ablated Metallized PET Films

Anindya Nag et al.

IEEE SENSORS JOURNAL (2017)

Article Engineering, Electrical & Electronic

Wearable Flexible Sensors: A Review

Anindya Nag et al.

IEEE SENSORS JOURNAL (2017)

Article Automation & Control Systems

A Temperature Compensated Smart Nitrate-Sensor for Agricultural Industry

Md. Eshrat E. Alahi et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Review Engineering, Multidisciplinary

Progress in the development of semiconducting metal oxide gas sensors: a review

Patrick T. Moseley

MEASUREMENT SCIENCE AND TECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Flexible thin film pH sensor based on low-temperature atomic layer deposition

Markus H. Jakob et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2017)

Article Engineering, Electrical & Electronic

Sensing system for salinity testing using laser-induced graphene sensors

Anindya Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2017)

Review Chemistry, Analytical

Polypyrrole based next generation electrochemical sensors and biosensors: A review

Rajeev Jain et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2017)

Review Chemistry, Multidisciplinary

Mini Review: Nanosheet Technology towards Biomedical Application

Sheng Zhang et al.

NANOMATERIALS (2017)

Review Chemistry, Physical

Carbon allotropes as sensors for environmental monitoring

Claudia C. Villarreal et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2017)

Review Green & Sustainable Science & Technology

Synthesis paradigm and applications of silver nanoparticles (AgNPs), a review

Hayelom Dargo Beyene et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2017)

Article Biophysics

Flexible heartbeat sensor for wearable device

Yeon Hwa Kwak et al.

BIOSENSORS & BIOELECTRONICS (2017)

Article Nanoscience & Nanotechnology

Defect-Mediated Molecular Interaction and Charge Transfer in Graphene Mesh Glucose Sensors

Sun Sang Kwon et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Nanoscience & Nanotechnology

A Review on Graphene-Based Gas/Vapor Sensors with Unique Properties and Potential Applications

Tao Wang et al.

NANO-MICRO LETTERS (2016)

Review Nanoscience & Nanotechnology

A Review on Graphene-Based Gas/Vapor Sensors with Unique Properties and Potential Applications

Tao Wang et al.

NANO-MICRO LETTERS (2016)

Article Engineering, Multidisciplinary

Piezoresistive properties of resin reinforced with carbon nanotubes for health-monitoring of aircraft primary structures

L. Vertuccio et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Materials Science, Composites

Strain monitoring mechanisms of sensors based on the addition of graphene nanoplatelets into an epoxy matrix

R. Moriche et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Article Engineering, Electrical & Electronic

Novel Sensing Approach for LPG Leakage Detection: Part I-Operating Mechanism and Preliminary Results

Anindya Nag et al.

IEEE SENSORS JOURNAL (2016)

Article Engineering, Electrical & Electronic

Flexible carbon nanotube nanocomposite sensor for multiple physiological parameter monitoring

Anindya Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2016)

Article Nanoscience & Nanotechnology

Tattoo like Polyaniline Microparticle-Doped Gold Nanowire Patches as Highly Durable Wearable Sensors

Shu Gong et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Nanoscience & Nanotechnology

Highly Stretchable and Ultrasensitive Strain Sensor Based on Reduced Graphene Oxide Microtubes-Elastomer Composite

Yongchao Tang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Review Chemistry, Physical

A manufacturing perspective on graphene dispersions

David W. Johnson et al.

CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2015)

Article Engineering, Electrical & Electronic

Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review

Saleem Khan et al.

IEEE SENSORS JOURNAL (2015)

Article Mathematics, Applied

Big Data Reduction and Optimization in Sensor Monitoring Network

Bin He et al.

JOURNAL OF APPLIED MATHEMATICS (2014)

Proceedings Paper Computer Science, Artificial Intelligence

Flexographic and inkjet printing of polymer optical waveguides for fully integrated sensor systems

Tim Wolfer et al.

2ND INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING (2014)

Article Chemistry, Analytical

Flexible Graphite-on-Paper Piezoresistive Sensors

Tian-Ling Ren et al.

SENSORS (2012)

Article Chemistry, Multidisciplinary

Super-Elastic Graphene Ripples for Flexible Strain Sensors

Yi Wang et al.

ACS NANO (2011)

Review Chemistry, Analytical

Semiconductor Quantum Dots in Chemical Sensors and Biosensors

Manuela F. Frasco et al.

SENSORS (2009)