4.7 Article

Biomaterials Based on Carbon Nanotube Nanocomposites of Poly(styrene-b-isobutylene-b-styrene): The Effect of Nanotube Content on the Mechanical Properties, Biocompatibility and Hemocompatibility

Related references

Note: Only part of the references are listed.
Article Materials Science, Biomaterials

Electrospun polyurethane/carbon nanotube composites with different amounts of carbon nanotubes and almost the same fiber diameter for biomedical applications

Zahra Eivazi Zadeh et al.

Summary: The study investigated the impact of raw carbon nanotubes on the properties of PU/CNT composites for biomedical applications. Results showed that adding CNTs led to improvements in various properties, but no direct correlation was found between CNT percentage and calcium adsorption. Additionally, no significant cytotoxicity was observed in cell tests for the nanocomposites.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Article Forestry

Chemical functional groups of extractives, cellulose and lignin extracted from native Leucaena leucocephala bark

Rafidah Md Salim et al.

Summary: The study characterized the chemical functional groups of an ethanol toluene-soluble extractive, alpha-cellulose, and lignin obtained from Leucaena leucocephala bark, revealing that aromatic functional groups were mainly found in the extractive, while water, carbonyl, and ether were dominant in cellulose, and methyl, methylene, carbonyl, and carboxyl groups were enriched in lignin.

WOOD SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Physical

Nanoarchitectonics at surfaces using multifunctional initiators of surface-initiated radical polymerization for fabrication of the nanocomposites

Volodymyr Donchak et al.

Summary: In this work, a new functional material with specific configurations and hierarchical motifs of multifunctional initiators of surface-initated radical polymerization (MPIs) on multi-wall carbon nanotubes (MWCNTs) was synthesized using the nanoarchitectonics approach. Raman spectroscopy and thermal analysis confirmed the presence of covalently-linked MPIs on the surfaces of amine functionalized MWCNTs. Nanocomposites of polybutylene terephthalate - poly(tetramethylene oxide) - (PBT/PTMO) with modified nanotubes showed higher Young's modulus, elongation at break, and crystallization temperature compared to nonmodified ones.

APPLIED SURFACE SCIENCE ADVANCES (2021)

Article Toxicology

The effects of functionalization of carbon nanotubes on toxicological parameters in mice

E. Mohammadi et al.

HUMAN & EXPERIMENTAL TOXICOLOGY (2020)

Article Engineering, Environmental

Reprocessing of High-Density Polyethylene Reinforced with Carbon Nanotubes

Sofie Svensson et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

Review Engineering, Biomedical

Materials and manufacturing perspectives in engineering heart valves: a review

F. Oveissi et al.

MATERIALS TODAY BIO (2020)

Review Materials Science, Biomaterials

Advanced biomedical applications of carbon nanotube

V. R. Raphey et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Review Chemistry, Multidisciplinary

Toxicity of Zero- and One-Dimensional Carbon Nanomaterials

Iruthayapandi Selestin Raja et al.

NANOMATERIALS (2019)

Review Materials Science, Composites

Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance

Mahoor Mehdikhani et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Article Multidisciplinary Sciences

Effective reinforcements for thermoplastics based on carbon nanotubes of oil fly ash

Numan Salah et al.

SCIENTIFIC REPORTS (2019)

Article Polymer Science

The preparation of carbon nanofillers and their role on the performance of variable polymer nanocomposites

Soad Z. Al Sheheri et al.

DESIGNED MONOMERS AND POLYMERS (2019)

Article Nanoscience & Nanotechnology

Enhanced mechanical properties of multiwalled carbon nanotubes/thermoplastic polyurethane nanocomposites

P. Kalakonda et al.

NANOMATERIALS AND NANOTECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Effects of octadecylamine functionalization of carbon nanotubes on dispersion, polarity, and mechanical properties of CNT/HDPE nanocomposites

B. R. C. de Menezes et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Review Materials Science, Biomaterials

Biocompatibility of polymer-based biomaterials and medical devices - regulations, in vitro screening and risk-management

Melisande Bernard et al.

BIOMATERIALS SCIENCE (2018)

Article Polymer Science

Study on the properties of multi-walled carbon nanotubes reinforced poly (vinyl alcohol) composites

E. M. Sadek et al.

JOURNAL OF POLYMER RESEARCH (2018)

Review Engineering, Chemical

Carbon nanotube-based nanocomposites and their applications

Murat Ates et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)

Article Polymer Science

Ferrocene-Modified Block Copolymers for the Preparation of Smart Porous Membranes

Sebastian Schoettner et al.

POLYMERS (2017)

Review Engineering, Chemical

Process Chain for the Fabrication of Nanoparticle Polymer Composites by Laser Ablation Synthesis

Elisabeth Maurer et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2017)

Article Engineering, Multidisciplinary

Thermal properties and thermal stability of PP/MWCNT composites

T. Y. Zhou et al.

COMPOSITES PART B-ENGINEERING (2016)

Review Engineering, Multidisciplinary

Application of Biomaterials in Cardiac Repair and Regeneration

Zhi Cui et al.

ENGINEERING (2016)

Proceedings Paper Physics, Applied

Optimization of Injection Molding Parameters for Poly(Styrene-Isobutylene-Styrene) Block Copolymer

Mauro Fittipaldi et al.

PROCEEDINGS OF PPS-31: THE 31ST INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (2016)

Article Chemistry, Physical

Carbon nanotube functionalized with dodecylamine for the effective dispersion in solvents

Filipe Vargas Ferreira et al.

APPLIED SURFACE SCIENCE (2015)

Article Peripheral Vascular Disease

Long-term results of PTFE grafts

Ulf Hedin

JOURNAL OF VASCULAR ACCESS (2015)

Article Materials Science, Biomaterials

Elastomeric nanocomposite scaffolds made from poly(glycerol sebacate) chemically crosslinked with carbon nanotubes

Akhilesh K. Gaharwar et al.

BIOMATERIALS SCIENCE (2015)

Article Multidisciplinary Sciences

Mechanical properties of carbon nanotube/polymer composites

B. Arash et al.

SCIENTIFIC REPORTS (2014)

Review Nanoscience & Nanotechnology

Carbon nanotubes: properties, synthesis, purification, and medical applications

Ali Eatemadi et al.

NANOSCALE RESEARCH LETTERS (2014)

Article Chemistry, Physical

Multiple functionalization of multi-walled carbon nanotubes with carboxyl and amino groups

Zhiyuan Zhao et al.

APPLIED SURFACE SCIENCE (2013)

Review Chemistry, Physical

The use of surfactants for dispersing carbon nanotubes and graphene to make conductive nanocomposites

Evgeniy E. Tkalya et al.

CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2012)

Review Chemistry, Physical

Characterization of Nanocomposites by Thermal Analysis

Carola Esposito Corcione et al.

MATERIALS (2012)

Article Nanoscience & Nanotechnology

Nanoscale optical and electrical characterization of horizontally aligned single-walled carbon nanotubes

Raul D. Rodriguez et al.

NANOSCALE RESEARCH LETTERS (2012)

Article Chemistry, Multidisciplinary

Improved Dispersion of Carbon Nanotubes in Polymers at High Concentrations

Chao-Xuan Liu et al.

NANOMATERIALS (2012)

Article Chemistry, Multidisciplinary

Carbon Nanotubes Activate Store-Operated Calcium Entry in Human Blood Platelets

Silvia H. De Paoli Lacerda et al.

ACS NANO (2011)

Article Hematology

Tissue factor and thrombosis: The clot starts here

A. Phillip Owens et al.

THROMBOSIS AND HAEMOSTASIS (2010)

Review Chemistry, Multidisciplinary

Noncovalent Functionalization of Single-Walled Carbon Nanotubes

Yan-Li Zhao et al.

ACCOUNTS OF CHEMICAL RESEARCH (2009)

Review Engineering, Biomedical

Medical applications of poly(styrene-block-isobutylene-block-styrene) (SIBS)

Leonard Pinchuk et al.

BIOMATERIALS (2008)

Article Engineering, Biomedical

Platelet adhesion studies on nanostructured poly(lactic-co-glycolic-acid)-carbon nanotube composite

Li Buay Koh et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)

Article Physics, Applied

Mechanics of prestressed polydimethylsiloxane-carbon nanotube composite

J. Paul et al.

APPLIED PHYSICS LETTERS (2006)

Article Toxicology

Cytotoxicity of single-wall carbon nanotubes on human fibroblasts

Furong Tian et al.

TOXICOLOGY IN VITRO (2006)

Review Materials Science, Composites

Review article: Polymer-matrix nanocomposites, processing, manufacturing, and application: An overview

Farzana Hussain et al.

JOURNAL OF COMPOSITE MATERIALS (2006)

Article Engineering, Biomedical

Improving the blood compatibility of polyurethane using carbon nanotubes as fillers and its implications to cardiovascular surgery

J Meng et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2005)

Article Chemistry, Physical

Characterization of carbon nanotubes by TEM and infrared spectroscopy

C Branca et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2004)

Article Engineering, Biomedical

Physical characterization of controlled release of paclitaxel from the TAXUSTM Express2TM drug-eluting stent

SV Ranade et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)

Article Physics, Applied

Homogeneous carbon nanotube/polymer composites for electrical applications

R Ramasubramaniam et al.

APPLIED PHYSICS LETTERS (2003)

Article Multidisciplinary Sciences

Supramolecular self-assembly of lipid derivatives on carbon nanotubes

C Richard et al.

SCIENCE (2003)

Article Chemistry, Physical

Effect of chemical oxidation on the structure of single-walled carbon nanotubes

J Zhang et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2003)

Article Chemistry, Physical

Interfacial heat flow in carbon nanotube suspensions

ST Huxtable et al.

NATURE MATERIALS (2003)