4.5 Article

Effects of Diatomite Contents on Microstructure, Microhardness, Bioactivity and Biocompatibility of Gradient Bioceramic Coating Prepared by Laser Cladding

Related references

Note: Only part of the references are listed.
Article Engineering, Biomedical

Hydroxyapatite reinforced Ti6Al4V composites for load-bearing implants

Jose D. Avila et al.

Summary: In this study, HA reinforced Ti64 composites were prepared using additive manufacturing technology to enhance both biocompatibility and wear resistance. The addition of HA resulted in increased hardness, the formation of a lubricating film, and a significant reduction in wear rates, promoting bone tissue-implant response and enhancing bone surface properties.

ACTA BIOMATERIALIA (2021)

Article Polymer Science

Preparation and properties of a new bio-based epoxy resin/diatomite composite

Xuefeng Li et al.

Summary: This study prepared a series of sustainable epoxy resin/diatomite composites with synthetic bio-based matrix resin and silanized natural diatomite filler, showing significantly improved mechanical and thermal stability after the incorporation of diatomite.

POLYMER DEGRADATION AND STABILITY (2021)

Article Engineering, Biomedical

Calcium silicate bioactive ceramics induce osteogenesis through oncostatin M

Panyu Zhou et al.

Summary: Immune reactions, especially macrophage polarization, play a crucial role in bone formation and repair after implanting bone substitute materials. Calcium silicate (CS) bioceramics can promote osteogenesis by inducing M2 macrophage polarization, enhancing osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The findings suggest potential strategies to enhance the in vitro osteogenesis capability of bone substitute materials.

BIOACTIVE MATERIALS (2021)

Article Engineering, Biomedical

Nano-needle strontium-substituted apatite coating enhances osteoporotic osseointegration through promoting osteogenesis and inhibiting osteoclastogenesis

Zhen Geng et al.

Summary: This study fabricated a series of apatite and Sr-substituted apatite coatings using electrochemical deposition, showing that the coatings with Sr at high pH conditions promoted MSCs adhesion, proliferation, and osteogenic differentiation, while inhibiting osteoclast activity. In vivo experiments demonstrated that nano-needle-like Sr-substituted apatite coatings significantly improved new bone formation and bone-implant integration.

BIOACTIVE MATERIALS (2021)

Article Engineering, Biomedical

Zn0.8Li0.1Sr-a biodegradable metal with high mechanical strength comparable to pure Ti for the treatment of osteoporotic bone fractures: In vitro and in vivo studies

Zechuan Zhang et al.

Summary: The study presents the first in vivo investigation of a Zn-based biodegradable metal for treating osteoporotic bone fractures, demonstrating excellent mechanical properties and superior osteogenesis-inducing and osteoporotic-bone-fracture-treating effects compared to pure Ti.

BIOMATERIALS (2021)

Article Metallurgy & Metallurgical Engineering

Design and characterization of Ti6Al4V/20CoCrMo-highly porous Ti6Al4V biomedical bilayer processed by powder metallurgy

E. Mihalcea et al.

Summary: This study developed a Ti6Al4V/20CoCrMo highly porous Ti6Al4V bilayer structure using powder metallurgy, showing good densification and ability to mimic natural bone tissue. The bilayer samples had no cracks at the interface, and the permeability of the highly porous layer was similar to that of human bones.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Article Engineering, Biomedical

Study on microstructure, microhardness, bioactivity, and biocompatibility of La2O3-containing bioceramic coating doping SiO2 fabricated by laser cladding

Qi Fu et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2020)

Article Biophysics

Effect of doping different Si source on Ca-P bioceramic coating fabricated by laser cladding

Qi Fu et al.

JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2020)

Article Engineering, Biomedical

Silicate-based bioceramic scaffolds for dual-lineage regeneration of osteochondral defect

Varitsara Bunpetch et al.

BIOMATERIALS (2019)

Article Materials Science, Ceramics

Micro-arc oxidation of bioceramic coatings containing eggshell-derived hydroxyapatite on titanium substrate

Tawfik Hamood Qaid et al.

CERAMICS INTERNATIONAL (2019)

Article Materials Science, Biomaterials

The controllable lanthanum ion release from Ca-P coating fabricated by laser cladding and its effect on osteoclast precursors

Shiwei Zhang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)

Proceedings Paper Engineering, Mechanical

The Effect of Coatings on the Wear Behavior of Ti6Al4V Alloy Used in Biomedical Applications

S. Danisman et al.

9TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (BALKANTRIB'17) (2018)

Review Engineering, Biomedical

An overview of graphene-based hydroxyapatite composites for orthopedic applications

Ming Li et al.

BIOACTIVE MATERIALS (2018)

Article Biochemistry & Molecular Biology

A New Bone Substitute Developed from 3D-Prints of Polylactide (PLA) Loaded with Collagen I: An In Vitro Study

Ulrike Ritz et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)

Review Engineering, Biomedical

Biomaterials approaches to treating implant-associated osteomyelitis

Jason A. Inzana et al.

BIOMATERIALS (2016)

Article Engineering, Biomedical

Degradation and silicon excretion of the calcium silicate bioactive ceramics during bone regeneration using rabbit femur defect model

Kaili Lin et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)

Article Materials Science, Biomaterials

Nanocrystalline silicon substituted hydroxyapatite effects on osteoclast differentiation and resorptive activity

Maria Concepcion Matesanz et al.

JOURNAL OF MATERIALS CHEMISTRY B (2014)

Review Engineering, Biomedical

Sintering of calcium phosphate bioceramics

E. Champion

ACTA BIOMATERIALIA (2013)

Review Engineering, Biomedical

Review of bioactive glass: From Hench to hybrids

Julian R. Jones

ACTA BIOMATERIALIA (2013)

Article Biochemistry & Molecular Biology

Analysis of Antioxidant and Anti-inflammatory Activity of Silicon in Murine Macrophages

Eun-Jin Kim et al.

BIOLOGICAL TRACE ELEMENT RESEARCH (2013)

Article Biochemistry & Molecular Biology

Effects of Silicon on Osteoblast Activity and Bone Mineralization of MC3T3-E1 Cells

Eun-Jin Kim et al.

BIOLOGICAL TRACE ELEMENT RESEARCH (2013)

Article Engineering, Biomedical

Mechanical Properties and In Vitro Bioactivity of Ca5(PO4)2SiO4 Bioceramic

Wenhao Lu et al.

JOURNAL OF BIOMATERIALS APPLICATIONS (2012)

Article Chemistry, Physical

3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis

Chengtie Wu et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Article Acoustics

Synthesis and characterisation of nanohydroxyapatite using an ultrasound assisted method

Gerard Eddy Poinern et al.

ULTRASONICS SONOCHEMISTRY (2009)

Article Engineering, Biomedical

β-CaSiO3/β-Ca3(PO4)2 composite materials for hard tissue repair:: In vitro studies

Siyu Ni et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)

Article Engineering, Biomedical

The story of Bioglass®

Larry L. Hench

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2006)

Article Engineering, Biomedical

Calcium phosphate cements: Competitive drug carriers for the musculoskeletal system?

MP Ginebra et al.

BIOMATERIALS (2006)

Review Materials Science, Multidisciplinary

Hip implants: Paper V. Physiological effects

A Sargeant et al.

MATERIALS & DESIGN (2006)

Review Engineering, Biomedical

Bioactive metals: preparation and properties

T Kokubo et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2004)