☆ 4.5 Article

Recent Progress with BCC-Structured High-Entropy Alloys

METALS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Amorphization, mechano-crystallization, and crystallization kinetics of mechanically alloyed AlFeCuZnTi high-entropy alloys

Sara Daryoush et al.

Summary: Equiatomic and non-equiatomic AlFeCuZnTi high-entropy alloys were prepared by high energy ball milling of elemental powders. Depending on the chemical composition, either an amorphous phase or BCC solid solution was obtained. The crystallization kinetics of the amorphous HEA was studied using DSC, showing a correlation between crystallization activation energy and self-diffusion activation energy of the constituting elements.

MATERIALS LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of V and Ti on the Oxidation Resistance of WMoTaNb Refractory High-Entropy Alloy at High Temperatures

Shuaidan Lu et al.

Summary: Alloying with V and Ti elements affects the oxidation behavior of WMoTaNb RHEAs. The addition of V aggravates the volatility of oxides and leads to disastrous internal oxidation. The addition of Ti reduces the mass gain in forming the oxide scale and prolongs the passivation duration.

METALS (2022)

Add to Collection

Article Chemistry, Physical

Preparation and microstructure and properties of AlCuFeMnTiV lightweight high entropy alloy

Yang Zhang et al.

Summary: A new type of lightweight high entropy alloy was prepared by mechanical alloying and spark plasma sintering. The effects of milling time and sintering temperature on the alloy's phase evolution, microstructure, and mechanical properties were investigated. The alloy sintered at 1050 degrees C showed the best comprehensive mechanical properties, surpassing most similar alloys in terms of density, hardness, strength, plasticity, and specific strength.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Stability prediction of AlCoCrFeMo0.05Ni2 high entropy alloy by Kinetic Monte Carlo method

Qilu Ye et al.

Summary: The study used Kinetic Monte Carlo (KMC) simulation to investigate the metastability in AlCoCrFeMo0.05Ni2 HEA and successfully predicted the phase separation behavior in a FCC solid solution. During annealing at 973 K, Al atoms were found to occupy preferentially vacancies and eventually formed the (Ni, Al)-rich phase, promoting the growth and transition of the phase from FCC to BCC structure.

MATERIALS LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrastrong and ductile BCC high-entropy alloys with low-density via dislocation regulation and nanoprecipitates

Xuehui Yan et al.

Summary: Extraordinary strength and good tensile ductility are achieved in (Zr0.5Ti0.35Nb0.15)(100-x)Al-x alloys at room temperature. The relatively low densities exhibited in these alloys make them attractive structural materials. Designing nanoprecipitates and diversifying dislocation motions play key roles in achieving such breakthrough.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Multidisciplinary

Experimental study on WFeNiMo high-entropy alloy projectile penetrating semi-infinite steel target

Hai-hua Chen et al.

Summary: The emergence of high-entropy alloys (HEAs) allows materials to have both high strength and high ductility, making them suitable for extreme conditions such as penetration processes. Experimental results indicate that the penetration mode of HEA projectiles changes from self-sharpening to mushrooming with increasing impact velocity, while the penetration mode of tungsten heavy alloy (WHA) projectiles remains mushrooming. The microstructure evolution of HEAs results in the blunting of projectiles.

DEFENCE TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Superior mechanical properties and strengthening mechanisms of lightweight AlxCrNbVMo refractory high-entropy alloys (x=0, 0.5, 1.0) fabricated by the powder metallurgy process

Byungchul Kang et al.

Summary: The AlxCrNbVMo high-entropy alloys exhibited superior mechanical properties with a homogeneous microstructure and high yield strength at both 25 and 1000 degrees C, attributed to solid solution strengthening mechanism.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy

Rui Feng et al.

Summary: High-entropy alloys show promising applications at high temperatures and a single-phase alloy with high-temperature strength can be designed based on intrinsic material characteristics. The high-temperature strength retention is attributed to mechanisms such as large atomic-size and elastic-modulus mismatches, insensitive temperature dependence of elastic constants, and dominance of non-screw character dislocations caused by strong solute pinning.

ADVANCED MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Microstructure and microhardness of high entropy alloys with Zn addition: AlCoFeNiZn and AlCoFeNiMoTiZn

M. A. Avila-Rubio et al.

Summary: High entropy alloys were designed from equiatomic multicomponent systems using powder metallurgy. Mo-containing systems exhibited the highest microhardness in both milled and sintered conditions, with alloy grain sizes in the nano scale.

ADVANCED POWDER TECHNOLOGY (2021)

Add to Collection

Review Physics, Multidisciplinary

High-Entropy Alloys for Advanced Nuclear Applications

Ed J. Pickering et al.

Summary: High-entropy alloys (HEAs) offer expanded compositional freedom for advanced nuclear applications, but our understanding of their irradiation responses is still in its infancy. While some studies suggest special irradiation damage resistance in HEAs, proposed mechanisms like sluggish diffusion and lattice distortion are not universally convincing, and unique differences in HEAs compared to conventional alloys may lie in factors like poor thermal conductivities.

ENTROPY (2021)

Add to Collection

Article Nuclear Science & Technology

Microstructure formation mechanism and corrosion behavior of FeCrCuTiV two-phase high entropy alloy prepared by different processes

Shaoqiu Xia et al.

Summary: The microstructure and corrosion resistance of FeCrCuTiV high entropy alloy were studied, with results showing that the laser melting deposition process reduces grain size and volume fraction of Cu-rich phase. The higher cooling rate of laser melting deposition contributes to limited grain growth and decreased Cu-rich phase volume fraction. FeCrCuTiV high entropy alloy prepared by laser melting deposition exhibits better corrosion resistance in salt solution electrochemical corrosion test due to reduced Cu-rich phase.

FUSION ENGINEERING AND DESIGN (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Designing VxNbMoTa refractory high-entropy alloys with improved properties for high-temperature applications

M. Wang et al.

Summary: The novel VxNbMoTa high-entropy alloys with vanadium concentrations of 0-25 at.% exhibit exceptional phase stability and high temperature strength, as well as excellent room-temperature ductility and resistance to high temperature deformation.

SCRIPTA MATERIALIA (2021)

Add to Collection

Article Chemistry, Physical

Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al(0.07)Co(1.26)Cr(1.80)Fe(1.42)Mn1.35Ni1.10 high entropy alloy

Mustafa Serdar Karakas et al.

Summary: High-entropy alloys with FCC structures were boronized to form hard boride layers, significantly increasing hardness and wear resistance while reducing friction. Increasing boronizing temperature enhanced coating thickness and improved wear characteristics.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Superior antifouling properties of a CoCrFeMnNi high-entropy alloy

Sujung Son et al.

Summary: The equiatomic CoCrFeMnNi high-entropy alloy exhibits superior antifouling properties against Ulva fasciata spores compared to 304 stainless steel, mainly due to its hydrophilic nature leading to a lower spore settlement rate.

MATERIALS LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural characteristics and evolution mechanisms of 90W?Ni?Fe alloy under high-strain-rate deformation

Lei Zhang et al.

Summary: The study found that under high strain rates, the deformation behavior of 90W-Ni-Fe alloy changes from homogeneous plastic deformation to localized shear deformation, forming adiabatic shear bands (ASBs). Additionally, the microstructure in the ASBs undergoes significant dynamic recrystallization.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improving the hydrogen embrittlement resistance of a selective laser melted high-entropy alloy via modifying the cellular structures

Zhenghong Fu et al.

Summary: This study demonstrates that modifying cellular structures through controlled annealing can effectively improve the hydrogen embrittlement resistance of selective laser melting processed alloys. Annealing preserved cellular structures while reducing dislocation densities, slightly reducing strength but significantly increasing ductility and HE resistance. The delayed crack initiation and propagation were attributed to hydrogen-enhanced local plasticity with formation of nano-twins and dislocation cells in the modified structures.

CORROSION SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of high entropy alloys: A practical review

Ahmad Ostovari Moghaddam et al.

Summary: The novel concept of high entropy alloys (HEAs) has led to the discovery of several promising materials with outstanding properties. Additive manufacturing (AM) provides new opportunities for fabricating complex HEAs and tailoring their microstructure. Future developments in HEAs are expected as the interest in AM of HEAs continues to grow.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys

Yu Fu et al.

Summary: High-entropy alloys (HEAs) have emerged as a research hotspot in the field of metal materials in the past decade. They exhibit much better corrosion resistance than traditional corrosion-resistant metal materials and the correlation among composition, microstructure, and corrosion resistance of HEAs has been revealed. The influence of heat treatment, anodizing treatment, and preparation methods on the corrosion behavior of HEAs has also been elaborated.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Irradiation behaviors of two novel single-phase bcc-structure high-entropy alloys for accident-tolerant fuel cladding

Zijian Zhang et al.

Summary: The two HEAs displayed slight irradiation hardening after irradiation, forming helium bubbles and dislocation loops, but voids and precipitates were not observed.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Coatings & Films

Tribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy

Ali Gunen

Summary: Boride layers were successfully grown on the Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high-entropy alloy at different temperatures using nanosized boronizing powders. The boronized alloys exhibited improved friction and wear resistance compared to the untreated alloy, with enhanced properties attributed to the formation of complex metal boride layers on the surface.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Multidisciplinary Sciences

High-throughput design of high-performance lightweight high-entropy alloys

Rui Feng et al.

Summary: The study introduces a high-throughput computational method to design precipitation-strengthened lightweight high-entropy alloys for elevated-temperature applications. By integrating experimental and theoretical understanding, the accuracy of the thermodynamic database is improved, accelerating the discovery of advanced structural materials. This approach proves to be efficient and useful in screening promising high-entropy alloys for high-temperature applications.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Superior tensile properties of 1%C-CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting

Jeong Min Park et al.

MATERIALS RESEARCH LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Self-sharpening tungsten high-entropy alloy

Xing-Fa Liu et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling of alloying effect on elastic properties in BCC Nb-Ti-V-Zr solid solution: From unary to quaternary

Mingqing Liao et al.

COMPUTATIONAL MATERIALS SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

High strength and ductility AlCrFeNiV high entropy alloy with hierarchically heterogeneous microstructure prepared by selective laser melting

Haili Yao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

E. P. George et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

High-throughput synthesis of Mo-Nb-Ta-W high-entropy alloys via additive manufacturing

Michael Moorehead et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Adiabatic shear band localization in an Al-Zn-Mg-Cu alloy under high strain rate compression

Muhammad Abubaker Khan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

High-throughput additive manufacturing and characterization of refractory high entropy alloys

Michael A. Melia et al.

Applied Materials Today (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Refractory alloying additions on the thermal stability and mechanical properties of high-entropy alloys

B. X. Cao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Structures and mechanical properties of Ti-Nb-Cr-V-Ni-Al refractory high entropy alloys

E. S. Panina et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Editorial Material Physics, Multidisciplinary

New Advances in High-Entropy Alloys

Yong Zhang et al.

ENTROPY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

High-Throughput Calculations for High-Entropy Alloys: A Brief Review

Ruixuan Li et al.

FRONTIERS IN MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

On the brittle-to-ductile transition of the as-cast TiVNbTa refractory high-entropy alloy

R. J. Scales et al.

MATERIALIA (2020)

Add to Collection

Article Materials Science, Coatings & Films

Microstructural, mechanical, and corrosion properties of plasma-nitrided CoCrFeMnNi high-entropy alloys

Akio Nishimoto et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Progress in additive manufacturing on new materials: A review

Neng Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Precipitation behavior of selective laser melted FeCoCrNiC0.05 high entropy alloy

Rui Zhou et al.

INTERMETALLICS (2019)

Add to Collection

Article Chemistry, Physical

High entropy alloy: A promising matrix for high-performance tungsten heavy alloys

Shangcheng Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy

Wenmin Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Manufacturing and Analysis of High-Performance Refractory High-Entropy Alloy via Selective Laser Melting (SLM)

Hang Zhang et al.

MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Outstanding radiation resistance of tungsten-based high-entropy alloys

O. El-Atwani et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Chemistry, Physical

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

Yan Long et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

y Microstructures and mechanical properties of HfNbTaTiZrW and HfNbTaTiZrMoW refractory high-entropy alloys

Meng Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

On the oxidation mechanism of refractory high entropy alloys

Franz Mueller et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder

Pan Wang et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Passivation of a corrosion resistant high entropy alloy in non-oxidizing sulfate solutions

Kathleen F. Quiambao et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

High temperature, low neutron cross-section high-entropy alloys in the Nb-Ti-V-Zr system

D. J. M. King et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Multidisciplinary Sciences

Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend

Vladimir V. Popov et al.

HELIYON (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy

Zezhou Li et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Chemistry, Physical

Precipitation behavior during hot deformation of powder metallurgy Ti-Nb-Ta-Zr-Al high entropy alloys

Yuankui Cao et al.

INTERMETALLICS (2018)

Add to Collection

Article Chemistry, Physical

Phase formation and strengthening mechanisms in a dual-phase nanocrystalline CrMnFeVTi high-entropy alloy with ultrahigh hardness

RuoKang Song et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Development and exploration of refractory high entropy alloys-A review

Oleg N. Senkov et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of Ti on the sintering and mechanical properties of refractory high-entropy alloy TixWTaVCr fabricated via spark plasma sintering for fusion plasma-facing materials

Owais Ahmed Waseem et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural evolution of adiabatic shear bands in pure copper during impact at high strain rates

Solomon Boakye-Yiadom et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process

Byungchul Kang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Processing of a new high entropy alloy: AlCrFeMoNiTi

Estela Prieto et al.

POWDER METALLURGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Transition in microstructural and mechanical behavior by reduction of sigma-forming element content in a novel high entropy alloy

Ahmad Raza et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Strength enhancement and density reduction by the addition of Al in CrFeMoV based high-entropy alloy fabricated through powder metallurgy

Ahmad Raza et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Chemistry, Physical

Alloying effect on phase stability, elastic and thermodynamic properties of Nb-Ti-V-Zr high entropy alloy

Mingqing Liao et al.

INTERMETALLICS (2018)

Add to Collection

Article Chemistry, Physical

Effect of solid carburization on the surface microstructure and mechanical properties of the equiatomic CoCrFeNi high-entropy alloy

L. J. Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of Nb25Mo25Ta25W25 and Ti8Nb23Mo23Ta23W23 high entropy alloys prepared by mechanical alloying and spark plasma sintering

Jiayi Pan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Chemistry, Physical

Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys

Z. D. Han et al.

INTERMETALLICS (2017)

Add to Collection

Article Chemistry, Physical

Processing, microstructure and properties of Ni1.5CoCuFeCr0.5-xVx high entropy alloys with carbon introduced from process control agent

Pei Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering

S. -H. Joo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Biomaterials

TiZrNbTaMo high-entropy alloy designed for orthopedic implants: As-cast microstructure and mechanical properties

Shao-Ping Wang et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Materials selection considerations for high entropy alloys

X. Fu et al.

SCRIPTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite

Praveen Sathiyamoorthi et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Multidisciplinary Sciences

Powder Metallurgy Processing of a WxTaTiVCr High-Entropy Alloy and Its Derivative Alloys for Fusion Material Applications

Owais Ahmed Waseem et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Corrosion of high entropy alloys

Yao Qiu et al.

NPJ MATERIALS DEGRADATION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Phase-Transformation Ductilization of Brittle High-Entropy Alloys via Metastability Engineering

Hailong Huang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

High-Entropy Alloys in Hexagonal Close-Packed Structure

M. C. Gao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Exceptional resistance to grain growth in nanocrystalline CoCrFeNi high entropy alloy at high homologous temperatures

S. Praveen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Review Metallurgy & Metallurgical Engineering

A Brief Review of High Entropy Alloys and Serration Behavior and Flow Units

Yong Zhang et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Neutron irradiation effects on the microstructural development of tungsten and tungsten alloys

Akira Hasegawa et al.

JOURNAL OF NUCLEAR MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Penetrating performance and self-sharpening behavior of fine-grained tungsten heavy alloy rod penetrators

Rongmei Luo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling

H. W. Yao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting

Hiroshi Shiratori et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Characterization of the microstructure of the compositionally complex alloy Al1Mo0.5Nb1Ta0.5Ti1Zr1

J. K. Jensen et al.

SCRIPTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy

Jian Chen et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Irradiation Resistance in Al x CoCrFeNi High Entropy Alloys

S. Q. Xia et al.

JOM (2015)

Add to Collection

Article Materials Science, Multidisciplinary

High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy)

H. M. Daoud et al.

JOM (2015)

Add to Collection

Article Chemistry, Physical

The evolution of microstructures and high temperature properties of AlxCo1.5CrFeNi1.5Tiy high entropy alloys

Yao-Jen Chang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Chemistry, Physical

Search for high entropy alloys in the X-NbTaTiZr systems (X = Al, Cr, V, Sn)

Marco Gabriele Poletti et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Irradiation Behavior in High Entropy Alloys

Song-qin Xia et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4

J. Kranz et al.

JOURNAL OF LASER APPLICATIONS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy

N. D. Stepanov et al.

MATERIALS LETTERS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Senary refractory high entropy alloy MoNbTaTiVW

B. Zhang et al.

MATERIALS SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

J. Y. He et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys

O. N. Senkov et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy

Yu Zou et al.

ACTA MATERIALIA (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Designing Radiation Resistance in Materials for Fusion Energy

S. J. Zinkle et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44 (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental and theoretical study of Ti20Zr20Hf20Nb20X20 (X = V or Cr) refractory high-entropy alloys

E. Fazakas et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

High-Entropy Alloys with a Hexagonal Close-Packed Structure Designed by Equi-Atomic Alloy Strategy and Binary Phase Diagrams

Akira Takeuchi et al.

JOM (2014)

Add to Collection

Article Chemistry, Physical

Microstructure and oxidation behavior of new refractory high entropy alloys

C. M. Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties

Y. D. Wu et al.

MATERIALS LETTERS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure of a near-equimolar refractory high-entropy alloy

J. P. Couzinie et al.

MATERIALS LETTERS (2014)

Add to Collection

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: Microstructure and phase analysis

O. N. Senkov et al.

ACTA MATERIALIA (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Phase Evolution and Thermal Analysis of Nanocrystalline AlCrCuFeNiZn High Entropy Alloy Produced by Mechanical Alloying

N. T. B. N. Koundinya et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system

O. N. Senkov et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy

O. N. Senkov et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys

Ming-Hao Chuang et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Chemistry, Physical

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2011)

Add to Collection

Article Chemistry, Physical

Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy

O. N. Senkov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Physics, Condensed Matter

The effect of prolonged irradiation on defect production and ordering in Fe-Cr and Fe-Ni alloys

K. Vortler et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy

O. N. Senkov et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Structural and mechanical properties of multi-element (AlCrMoTaTiZr)Nx coatings by reactive magnetron sputtering

Keng-Hao Cheng et al.

THIN SOLID FILMS (2011)

Add to Collection

Article Chemistry, Physical

Refractory high-entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2010)

Add to Collection

Article Chemistry, Physical

High temperature oxidation characteristics of Nb-10W-XCr alloys

Maria del Pilar Moricca et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Self-sharpening behavior during ballistic impact of the tungsten heavy alloy rod penetrators processed by hot-hydrostatic extrusion and hot torsion

Zhou Xiaoqing et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Chemistry, Physical

Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy

Tao-Tsung Shun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Chemistry, Physical

Synthesis and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying

S. Varalakshmi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and compressive properties of AlCrFeCoNi high entropy alloy

Y. P. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Recent progress in high-entropy alloys

Jien-Wei Yeh

ANNALES DE CHIMIE-SCIENCE DES MATERIAUX (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Al, Cr and Ta additions on the oxidation behaviour of Nb-Ti-Si in situ composites at 800 °C

K Zelenitsas et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical kinetics of the high entropy alloys in aqueous environments - a comparison with type 304 stainless steel

YY Chen et al.

CORROSION SCIENCE (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and electrochemical properties of high entropy alloys - a comparison with type-304 stainless steel

YY Chen et al.

CORROSION SCIENCE (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Self-organization of shear bands in titanium and Ti-6Al-4V alloy

Q Xue et al.

ACTA MATERIALIA (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Processing strategy for consolidating tungsten heavy alloys for ordnance applications

A Upadhyaya

MATERIALS CHEMISTRY AND PHYSICS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.