Related references
Note: Only part of the references are listed.Post-weld cold working for fatigue strength improvement of resistance spot welded joint of advanced high-strength steel
Sendong Ren et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)
AHSS welding using undermatching filler wires and process advantages with P-GMAW
Merbin John et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Mechanical properties and corrosion behavior of galvanized steel/Al dissimilar joints
Hao Jiang et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)
Microstructure and Mechanical Properties of Laser-Welded DP Steels Used in the Automotive Industry
Hanbing He et al.
MATERIALS (2021)
Influence of temperature- and phase-dependent yield strength on residual stresses in ultra-high strength steel S960 weldments
Jiamin Sun et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Comparative study on joining quality of electromagnetic driven self-piecing riveting, adhesive and hybrid joints for Al/steel structure
Hao Jiang et al.
THIN-WALLED STRUCTURES (2021)
Experimental investigation on fatigue behavior of butt-welded high-strength steel plates
Lewei Tong et al.
THIN-WALLED STRUCTURES (2021)
Mechanisms of paint bake response in resistance spot-welded first and third generation AHSS
M. Shamsujjoha et al.
MATERIALIA (2021)
Control of Weld Residual Stress in a Thin Steel Plate through Low Transformation Temperature Welding Consumables A new LTTW consumable for welding of advanced high-strength steels was developed for welding thin sheets
X. Wu et al.
WELDING JOURNAL (2020)
A Study on Microstructure, Residual Stresses and Stress Corrosion Cracking of Repair Welding on 304 Stainless Steel: Part II-Effects of Reinforcement Height
Xiaodong Hu et al.
MATERIALS (2020)
FE thermo-mechanical simulation of welding residual stresses and distortion in Ti-containing TWIP steel through GTAW process
V. Garcia-Garcia et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Mechanical reliability of TWIP steel spot weldings
Tiago C. A. Colombo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Microstructure, forming limit diagram, and strain distribution of pre-strained DP-IF steel tailor-welded blank for auto body application
Shamik Basak et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of Heat Input and Undermatched Filler Wire on the Microstructure and Mechanical Properties of Dissimilar S700MC/S960QC High-Strength Steels
Francois Njock Bayock et al.
METALS (2019)
Investigations on induced residual stresses, mechanical and metallurgical properties of CO2 laser beam and pulse current gas tungsten arc welded SMO 254
P. Roshith et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Improvement of the fatigue strength of welds for lightweight chassis application made of Advanced High Strength Steels
M. Duchet et al.
FATIGUE DESIGN 2019, INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, 8TH EDITION (2019)
Residual stress distributions in arc, laser and electron-beam welds in 30 mm thick SA508 steel: A cross-process comparison
J. Balakrishnan et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2018)
Influence of SC-HAZ microstructure on the mechanical behavior of Si-TRIP steel welds
J. J. Guzman-Aguilera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Measurement of residual stress in arc welded lap joints by cosα X-ray diffraction method
Jian Lin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
The Influence of Laser Welding on the Mechanical Properties of Dual Phase and Trip Steels
Emil Evin et al.
METALS (2017)
Effects of Pulsed Nd:YAG Laser Welding Parameters on Penetration and Microstructure Characterization of a DP1000 Steel Butt Joint
Xin Xue et al.
METALS (2017)
Residual stresses induced by laser welding process in the case of a dual-phase steel DP600: Simulation and experimental approaches
A. Kouadri-Henni et al.
MATERIALS & DESIGN (2017)
Fatigue behavior of AHSS lap shear and butt arc welds including the effect of periodic overloads and underloads
Shahriar Sharifimehr et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
A comparative study of the microstructure and properties of 800 MPa microalloyed C-Mn steel welded joints by laser and gas metal arc welding
Qian Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructures and failure analyses of DP980 laser welded blanks in formability context
K. Bandyopadhyay et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The Optimization of Process Parameters and Microstructural Characterization of Fiber Laser Welded Dissimilar HSLA and MART Steel Joints
Celalettin Yuce et al.
METALS (2016)
Gas metal arc welding of dissimilar AHSS sheets
Kornel Majlinger et al.
MATERIALS & DESIGN (2016)
Fatigue life of GMAW and PAW welding joints of boron microalloyed steels
Hernan G. Svoboda et al.
INTERNATIONAL CONGRESS OF SCIENCE AND TECHNOLOGY OF METALLURGY AND MATERIALS, SAM - CONAMET 2014 (2015)
A comparison of residual stresses in multi pass narrow gap laser welds and gas-tungsten arc welds in AISI 316L stainless steel
Ahmed Elmesalamy et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2014)
Review: Low transformation temperature weld filler for tensile residual stress reduction
S. W. Ooi et al.
MATERIALS & DESIGN (2014)
Laser, tungsten inert gas, and metal active gas welding of DP780 steel: Comparison of hardness, tensile properties and fatigue resistance
Jeong Hun Lee et al.
MATERIALS & DESIGN (2014)
A comparative study on welding temperature fields, residual stress distributions and deformations induced by laser beam welding and CO2 gas arc welding
Jiamin Sun et al.
MATERIALS & DESIGN (2014)
Microstructure and fatigue performance of butt-welded joints in advanced high-strength steels
Godwin Kwame Ahiale et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Measurement of surface residual stresses and testing mechanical properties of high-strength steel butt joints obtained by hybrid laser/gas metal arc welding
Fanrong Kong et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2013)
Influence of current intensity and heat input in Metal Inert Gas-brazed joints of TRIP 800 thin zinc coated steel plates
Faruk Varol et al.
MATERIALS & DESIGN (2013)
Differences between laser and arc welding of HSS steels
Stanislav Nemecek et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Microstructure and residual stress distribution of similar and dissimilar electron beam welds - Maraging steel to medium alloy medium carbon steel
P. Venkata Ramana et al.
MATERIALS & DESIGN (2010)
Microstructure and mechanical properties of laser-welded joints of TWIP and TRIP steels
L. Mujica et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
High-precision determination of residual stress of polycrystalline coatings using optimised XRD-sin2ψ technique
Q. Luo et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Weldability of Low Carbon Transformation Induced Plasticity Steel
Zhang Mei et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2008)
Effects of residual stress and heat treatment on fatigue strength of weldments
Hong Tae Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Residual stresses in resistance spot welded steel joints
S. K. Khanna et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2008)
Influence of microstructure and weld size on the mechanical behaviour of dissimilar AHSS resistance spot welds
V. H. Baltazar Hernandez et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2008)
Welding residual stresses in ferritic power plant steels
J. A. Francis et al.
MATERIALS SCIENCE AND TECHNOLOGY (2007)
Share Paper
