Related references
Note: Only part of the references are listed.Effect of extrudate swell on extrusion foam of polyethylene terephthalate
D. Tammaro et al.
JOURNAL OF CELLULAR PLASTICS (2021)
Effect of polymer swell in extrusion foaming of low-density polyethylene
Lorenzo Lombardi et al.
PHYSICS OF FLUIDS (2021)
Preparation of polypropylene/high-melt-strength PP open-cell foam for oil absorption
Shu-Kai Yeh et al.
POLYMER ENGINEERING AND SCIENCE (2021)
Supercritical CO2 utilization for development of graded cellular structures in semicrystalline polymers
Vahid Shaayegan et al.
JOURNAL OF CO2 UTILIZATION (2021)
Lightweight and strong gelling agent-reinforced injection-molded polypropylene composite foams fabricated using low-pressure CO2 as the foaming agent
Qian Ren et al.
JOURNAL OF CO2 UTILIZATION (2021)
Microcellular PLA/PMMA foam fabricated by CO2 foaming with outstanding shape-memory performance
Jialong Chai et al.
JOURNAL OF CO2 UTILIZATION (2021)
Biomimetic porous polypropylene foams with special wettability properties
Pengke Huang et al.
COMPOSITES PART B-ENGINEERING (2020)
Thermal Conductivity of Low-Density Polyethylene Foams Part II: Deep Investigation using Response Surface Methodology
Rezgar Hasanzadeh et al.
JOURNAL OF THERMAL SCIENCE (2020)
Highly expanded, highly insulating polypropylene/polybutelene-terephthalate composite foams manufactured by nano-fibrillation technology
Chongxiang Zhao et al.
MATERIALS & DESIGN (2020)
Disulfide polymer grafted polypropylene/polyethylene filter media for selective cadmium removal
Jeongmin Hong et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Effects of ordered hierarchically porous structure on methane reforming performance in solar foam reactor
Xuhang Shi et al.
JOURNAL OF CO2 UTILIZATION (2020)
Lightweight multifunctional polypropylene/carbon nanotubes/carbon black nanocomposite foams with segregated structure, ultralow percolation threshold and enhanced electromagnetic interference shielding performance
Jiajun Ju et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Large-scale fabrication of lightweight, tough polypropylene/carbon black composite foams as broadband microwave absorbers
Fei Wu et al.
COMPOSITES COMMUNICATIONS (2020)
Improved cell nucleating effect of partially melted crystal structure to enhance the microcellular foaming and impact properties of isotactic polypropylene
Long Fu et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2020)
Mechanical properties of 3D printed architected polymer foams under large deformation
Huan Jiang et al.
MATERIALS & DESIGN (2020)
Thermoplastic foaming with thermo-expandable microcapsules: Mathematical modeling and numerical simulation for extrusion process
M. Riou et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Direct Synthesis of High-Melt-Strength Polypropylene Using the Fourth Generation Heterogeneous Ziegler-Natta Catalyst and Commercial Production Process
Tsutomu Uzawa et al.
ACS APPLIED POLYMER MATERIALS (2020)
Novel lightweight open-cell polypropylene foams for filtering hazardous materials
Fei Wu et al.
RSC ADVANCES (2020)
Surface-engineered sponges for recovery of crude oil microdroplets from wastewater
Pavani Cherukupally et al.
NATURE SUSTAINABILITY (2020)
Processing of of nanocomposites using supercritical fluid assisted extrusion for stress/strain sensing applications
Anup Poudel et al.
COMPOSITES PART B-ENGINEERING (2019)
A prediction model using response surface methodology based on cell size and foam density to predict thermal conductivity of polystyrene foams
Rezgar Hasanzadeh et al.
HEAT AND MASS TRANSFER (2019)
Bio-inspired lightweight polypropylene foams with tunable hierarchical tubular porous structure and its application for oil-water separation
Pengke Huang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Lightweight and strong fibrillary PTFE reinforced polypropylene composite foams fabricated by foam injection molding
Jinchuan Zhao et al.
EUROPEAN POLYMER JOURNAL (2019)
Ultrastrong, flexible and lightweight anisotropic polypropylene foams with superior flame retardancy
Pengke Huang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Dynamic impact response of aluminum honeycombs filled with Expanded Polypropylene foam
Yanqin Zhang et al.
COMPOSITES PART B-ENGINEERING (2019)
Formation of stretched fibrils and nanohybrid shish-kebabs in isotactic polypropylene-based nanocomposites by application of a dynamic oscillatory shear
Lengwan Li et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding
Guilong Wang et al.
CHEMICAL ENGINEERING JOURNAL (2018)
A Reactive Extrusion Process With the Aid of Ultrasound for Preparing Crosslinked Polypropylene
Mingtao Yang et al.
POLYMER ENGINEERING AND SCIENCE (2017)
Reexamining the Crystallization of Poly(ε-caprolactone) and Isotactic Polypropylene under Hard Confinement: Nucleation and Orientation
Guangyu Shi et al.
MACROMOLECULES (2017)
Radiation effects on the foaming of atactic polypropylene with supercritical carbon dioxide
Chenguang Yang et al.
RADIATION PHYSICS AND CHEMISTRY (2017)
Steam-chest molding of expanded thermoplastic polyurethane bead foams and their mechanical properties
Chengbiao Ge et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Process-microstructure-electrical conductivity relationships in injection-molded polypropylene/carbon nanotube nanocomposite foams
A. Ameli et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Unprecedented Development of Ultrahigh Expansion Injection-Molded Polypropylene Foams by Introducing Hydrophobic-Modified Cellulose Nanofibers
Long Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Morphology model for polymer foams formed by thermally induced phase separation
Michal Vonka et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Open-cell polypropylene/polyolefin elastomer blend foams fabricated for reusable oil-sorption materials
Shusheng Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Cell nucleation in dominating formation of bimodal cell structure in polypropylene/polystyrene blend foams prepared via continuous extrusion with supercritical CO2
Kun Wang et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2016)
Preparation of open-cell polymer foams by CO2 assisted foaming of polymer blends
Wei-long Kong et al.
POLYMER (2016)
A new approach designed for improving flame retardancy of intumescent polypropylene via continuous extrusion with supercritical CO2
Pengke Huang et al.
RSC ADVANCES (2016)
Supercritical CO2 foaming of pressure-induced-flow processed linear polypropylene
Dajiong Fu et al.
MATERIALS & DESIGN (2016)
Microcellular to nanocellular polymer foams: Progress (2004-2015) and future directions - A review
Chimezie Okolieocha et al.
EUROPEAN POLYMER JOURNAL (2015)
Fabrication of Unidirectional Diffusion Layer onto Polypropylene Mat for Oil Spill Cleanup
Xiangyu Zhou et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Property enhancement of PP-EPDM thermoplastic vulcanizates via shear-induced break-up of nano-rubber aggregates and molecular orientation of the matrix
Yongsheng Zhao et al.
POLYMER (2015)
Superhydrophobic and Oleophilic Open-Cell Foams from Fibrillar Blends of Polypropylene and Polytetrafluoroethylene
Ali Rizvi et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Highly Oriented Polymer Semiconductor Films Compressed at the Surface of Ionic Liquids for High-Performance Polymeric Organic Field-Effect Transistors
Junshi Soeda et al.
ADVANCED MATERIALS (2014)
Pumping through Porous Hydrophobic/Oleophilic Materials: An Alternative Technology for Oil Spill Remediation
Jin Ge et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
A novel strategy for the preparation of long chain branching polypropylene and the investigation on foamability and rheology
Shuzhao Li et al.
EUROPEAN POLYMER JOURNAL (2012)
Effect of cell shape anisotropy on the compressive behavior of closed-cell aluminum foams
Yongliang Mu et al.
MATERIALS & DESIGN (2010)
Foaming Behavior of High-Melt Strength Polypropylene/Clay Nanocomposites
Subhendu Bhattacharya et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Effect of die geometry on foaming behaviors of high-melt-strength polypropylene with CO2
Patrick C. Lee et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Extruded open-cell foams using two semicrystalline polymers with different crystallization temperatures
PC Lee et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)
Share Paper
