4.6 Article

Revealing the doping density in perovskite solar cells and its impact on device performance

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Dielectric Junction: Electrostatic Design for Charge Carrier Collection in Solar Cells

Juergen Huepkes et al.

Summary: This study investigates the impact of electrostatics on device performance for classical solar cells and perovskite solar cells through numerical simulations. It emphasizes the importance of permittivity variations on device efficiency and proposes the principle of optimizing device design by minimizing volume and selecting charge transport layers with adapted permittivity.

SOLAR RRL (2022)

Article Materials Science, Multidisciplinary

Effect of Doping, Photodoping, and Bandgap Variation on the Performance of Perovskite Solar Cells

Basita Das et al.

Summary: This study uses numerical simulations to investigate the influence of doping and photodoping on photoluminescence quantum yield and device performance. The results reveal that doping can enhance photoluminescence quantum yield by accelerating radiative recombination. However, high doping densities may reduce the diffusion length, leading to inefficient carrier collection and consequently lower photovoltaic performance. Therefore, the improvement of photovoltaic performance may require optimum doping densities.

ADVANCED OPTICAL MATERIALS (2022)

Article Physics, Applied

p-n heterojunction perovskite solar cell with bilateral Ohmic contacts

Like Huang et al.

Summary: By utilizing synergetic energy band and interface engineering, this study demonstrates a high-efficient prototype of p-n heterojunction halide perovskite solar cell, showcasing its great potential.

APPLIED PHYSICS LETTERS (2021)

Editorial Material Multidisciplinary Sciences

Comment on Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells

Sandheep Ravishankar et al.

Summary: The results reported by Ni et al. are not actual trap densities, but rather a consequence of geometrical capacitance and charge injection into the perovskite layer.

SCIENCE (2021)

Article Chemistry, Physical

Orders of Recombination in Complete Perovskite Solar Cells - Linking Time-Resolved and Steady-State Measurements

Christian M. Wolff et al.

Summary: This study investigated carrier dynamics in mixed halide perovskite solar cells with an efficiency >20%, revealing a superposition of first-, second-, and third-order recombination processes. The results show that under solar illumination, recombination in the studied solar cells proceeds predominantly through nonradiative first-order recombination with a lifetime of 250 ns. The transient experiments further help explain the steady-state solar cell properties over a wide range of illumination intensities.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Large-Grain Double Cation Perovskites with 18 μs Lifetime and High Luminescence Yield for Efficient Inverted Perovskite Solar Cells

Emilio Gutierrez-Partida et al.

Summary: Recent advancements in perovskite solar cell research have focused on improving efficiency and stability by developing high-quality double cation perovskite materials. The low-bandgap cells exhibited high fill factor and short-circuit current, showcasing reduced charge transport losses. The implied efficiency in the neat material reached 28.4% through minimizing interfacial recombination and optical losses.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Revealing Charge Carrier Mobility and Defect Densities in Metal Halide Perovskites via Space-Charge-Limited Current Measurements

Vincent M. Le Corre et al.

Summary: Space-charge-limited current (SCLC) measurements are widely used to study charge carrier mobility and trap density in semiconductors, but their application to metal halide perovskites is complicated by the mixed ionic and electronic nature of these materials. The presence of mobile ions strongly affects the measurements, requiring a refined analysis and interpretation of SCLC. Pulsed SCLC, combined with drift-diffusion simulations, offers a reliable method for simultaneously extracting mobility, trap, and ion densities in perovskite semiconductors.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

Mechanism and Timescales of Reversible p-Doping of Methylammonium Lead Triiodide by Oxygen

Dongguen Shin et al.

Summary: The electronic properties of metal halide perovskites (MHPs) remain under debate, with reported Fermi level positions varying and raising questions about intrinsic and extrinsic defects as dopants. This study demonstrates that MHPs behave as intrinsic semiconductors in the absence of oxygen, but oxygen diffusion leads to pronounced p-doping and positions the Fermi level approximately 0.55 eV above the valence band maximum. The key doping mechanism is suggested to be molecular oxygen substitution of iodine vacancies, supported by density functional theory calculations.

ADVANCED MATERIALS (2021)

Review Nanoscience & Nanotechnology

Electrical doping in halide perovskites

Julie Euvrard et al.

Summary: Halide perovskites have excellent semiconductor properties and are crucial for various devices, yet achieving reliable electrical doping remains challenging. This Review discusses semiconductor doping fundamentals, different doping strategies, characterization techniques, and emphasizes the challenges that need to be overcome for controlling the electronic properties of this important material class.

NATURE REVIEWS MATERIALS (2021)

Article Chemistry, Multidisciplinary

Defects in Hybrid Perovskites: The Secret of Efficient Charge Transport

Artem Musiienko et al.

Summary: This study quantifies and characterizes defects in single crystal MAPbI(3) using a multi-method approach, revealing the interaction of carriers with different defects and their impact on charge transport properties in methylammonium lead halide perovskites. The results show that the dominant part of defects releases free carriers after trapping, leading to positive effects on photoconversion and charge transport, while shallow traps decrease drift mobility significantly. This research provides insights for optimizing charge transport properties and defects in MHP and contributes to improving perovskite stability.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Universal Current Losses in Perovskite Solar Cells Due to Mobile Ions

Jarla Thiesbrummel et al.

Summary: The study reveals that Pb/Sn perovskite devices experience a reduction in charge extraction efficiency within the first few seconds of operation, leading to current losses and lower maximum power output. Accumulation of electronic charges in the active layer causes the emitted photoluminescence from the device to rise.

ADVANCED ENERGY MATERIALS (2021)

Article Materials Science, Multidisciplinary

Tailored Local Bandgap Modulation as a Strategy to Maximize Luminescence Yields in Mixed-Halide Perovskites

Sascha Feldmann et al.

Summary: Halide perovskites are high-performance semiconductors for optoelectronic devices, with their bandgap tunability using mixtures of different halide ions. The study combines temperature-dependent photoluminescence microscopy with computational modeling to quantify the impact of local bandgap variations on the global photoluminescence yield. Factors such as fabrication temperature, surface energy, and charge recombination constants are key in determining photoluminescence quantum efficiency, and tailored bandgap modulation can further enhance luminescence efficiency. This work provides a new strategy and fabrication guidelines for improving halide perovskite performance in light-emitting and photovoltaic applications.

ADVANCED OPTICAL MATERIALS (2021)

Article Chemistry, Physical

Apparent Defect Densities in Halide Perovskite Thin Films and Single Crystals

Johanna Siekmann et al.

ACS ENERGY LETTERS (2021)

Article Energy & Fuels

Pathways toward 30% Efficient Single-Junction Perovskite Solar Cells and the Role of Mobile Ions

Jonas Diekmann et al.

Summary: Perovskite semiconductors have shown promising potential for achieving high power conversion efficiencies, with a predicted maximum efficiency of 31% through optimization of built-in voltage. The study suggests that continuous improvements in efficiency can be expected in the future, positioning perovskites as a highly efficient solar cell technology.

SOLAR RRL (2021)

Article Chemistry, Physical

The Impact of Mobile Ions on the Steady-State Performance of Perovskite Solar Cells

Nandi Wu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Article Chemistry, Physical

Toward Understanding Space-Charge Limited Current Measurements on Metal Halide Perovskites

Elisabeth A. Duijnstee et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Physical

Photoluminescence-Based Characterization of Halide Perovskites for Photovoltaics

Thomas Kirchartz et al.

ADVANCED ENERGY MATERIALS (2020)

Editorial Material Energy & Fuels

Minimum doping densities for p-n junctions

Thomas Kirchartz et al.

NATURE ENERGY (2020)

Article Nanoscience & Nanotechnology

Unraveling the Electronic Properties of Lead Halide Perovskites with Surface Photovoltage in Photoemission Studies

Fengshuo Zu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Multidisciplinary Sciences

Carrier-resolved photo-Hall effect

Oki Gunawan et al.

NATURE (2019)

Article Chemistry, Physical

High open circuit voltages in pin-type perovskite solar cells through strontium addition

Pietro Caprioglio et al.

SUSTAINABLE ENERGY & FUELS (2019)

Article Chemistry, Multidisciplinary

Quantification of ion migration in CH3NH3PbI3 perovskite solar cells by transient capacitance measurements

Moritz H. Futscher et al.

MATERIALS HORIZONS (2019)

Article Chemistry, Multidisciplinary

Deep levels, charge transport and mixed conductivity in organometallic halide perovskites

Artem Musiienko et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

Quantification of Ionic Diffusion in Lead Halide Perovskite Single Crystals

Wei Peng et al.

ACS ENERGY LETTERS (2018)

Article Nanoscience & Nanotechnology

Research Update: Recombination and open-circuit voltage in lead-halide perovskites

Thomas Kirchartz et al.

APL MATERIALS (2018)

Article Chemistry, Physical

Doping Profile in Planar Hybrid Perovskite Solar Cells Identifying Mobile Ions

Mathias Fischer et al.

ACS APPLIED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Approaching the fill factor Shockley-Queisser limit in stable, dopant-free triple cation perovskite solar cells

Martin Stolterfoht et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Physical

What Is the Mechanism of MAPbI3 p-Doping by I2? Insights from Optoelectronic Properties

Arava Zohar et al.

ACS ENERGY LETTERS (2017)

Review Chemistry, Multidisciplinary

Controlling Molecular Doping in Organic Semiconductors

Ian E. Jacobs et al.

ADVANCED MATERIALS (2017)

Article Multidisciplinary Sciences

Enhancing photoluminescence yields in lead halide perovskites by photon recycling and light out-coupling

Johannes M. Richter et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Physical

The detrimental effect of excess mobile ions in planar CH3NH3PbI3 perovskite solar cells

Yuanhang Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Energy & Fuels

Defects in perovskite-halides and their effects in solar cells

James M. Ball et al.

NATURE ENERGY (2016)

Article Chemistry, Physical

Capacitive Dark Currents, Hysteresis, and Electrode Polarization in Lead Halide Perovskite Solar Cells

Osbel Almora et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Multidisciplinary

Electronic Level Alignment in Inverted Organometal Perovskite Solar Cells

Philip Schulz et al.

ADVANCED MATERIALS INTERFACES (2015)

Article Chemistry, Multidisciplinary

Self-Regulation Mechanism for Charged Point Defects in Hybrid Halide Perovskites

Aron Walsh et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Article Physics, Applied

Qualifying composition dependent p and n self-doping in CH3NH3PbI3

Qi Wang et al.

APPLIED PHYSICS LETTERS (2014)

Article Physics, Applied

Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber

Wan-Jian Yin et al.

APPLIED PHYSICS LETTERS (2014)

Article Chemistry, Physical

The Role of Intrinsic Defects in Methylammonium Lead Iodide Perovskite

Jongseob Kim et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Article Materials Science, Multidisciplinary

Direct determination of doping concentration and built-in voltage from extraction current transients

Oskar J. Sandberg et al.

ORGANIC ELECTRONICS (2014)

Article Materials Science, Multidisciplinary

Comprehensive picture of p-type doping of P3HT with the molecular acceptor F4TCNQ

P. Pingel et al.

PHYSICAL REVIEW B (2013)

Article Physics, Applied

Effect of molecular p-doping on hole density and mobility in poly(3-hexylthiophene)

P. Pingel et al.

APPLIED PHYSICS LETTERS (2012)

Article Chemistry, Physical

Sensitivity of the Mott-Schottky Analysis in Organic Solar Cells

Thomas Kirchartz et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Article Energy & Fuels

Modeling thin-film PV devices

M Burgelman et al.

PROGRESS IN PHOTOVOLTAICS (2004)

Article Materials Science, Multidisciplinary

Charge transport in π-conjugated polymers from extraction current transients

G Juska et al.

PHYSICAL REVIEW B (2000)

Article Physics, Multidisciplinary

Extraction current transients: New method of study of charge transport in microcrystalline silicon

G Juska et al.

PHYSICAL REVIEW LETTERS (2000)

Article Materials Science, Multidisciplinary

Modelling polycrystalline semiconductor solar cells

M Burgelman et al.

THIN SOLID FILMS (2000)