4.6 Article

Unraveling the Origin of Dark Current in Organic Bulk Heterojunction Photodiodes for Achieving High Near-Infrared Detectivity

Journal

ACS PHOTONICS
Volume 9, Issue 6, Pages 2056-2065

Publisher

AMER CHEMICAL SOC
DOI: 10.1021/acsphotonics.2c00193

Keywords

organic photodetector; bulk heterojunction; phase morphology; dark current; sub-bandgap states

Funding

  1. internal program of the Korea Institute of Science and Technology
  2. Nano Future Material Technology Development Program through the National Research Foundation of Korea (NRF) - Ministry of Science and ICT [NRF-2020M3H4A3081817]
  3. National R&D Program through the NRF - Ministry of Science and ICT [NRF-2020M3H4A1A02084910]
  4. National Research Foundation of Korea [2020M3H4A1A02084910] Funding Source: Korea Institute of Science & Technology Information (KISTI), National Science & Technology Information Service (NTIS)

Ask authors/readers for more resources

Organic infrared materials have high absorption coefficients and adjustable absorption spectrum. In organic photodetectors, achieving a high signal-to-noise ratio in the near-infrared spectrum is often challenging. This study investigates the origin of dark currents in near-infrared organic photodetectors and reveals strategies to improve detectivity through donor-acceptor blending morphology and the effects of carrier injection from outer electrodes.
Organic infrared materials are attractive due to their high absorption coefficients and facile tuning of the absorption spectrum beyond that of silicon. Although bulk heterojunctions (BHJs) are widely used in organic photodetectors (OPDs), achieving a high signal-to-noise ratio in the near-infrared spectrum is often challenging due to the inherently large dark currents in low-bandgap polymers and their blending morphology effect. Herein, we investigate the origin of dark currents in near-infrared OPDs and reveal a strategy to improve the detectivity in terms of two aspects: (1) donor-acceptor blending morphology and (2) effects of carrier injection from outer electrodes. To do so, a series of random terpolymers were synthesized in a similar band structure and their blending morphology with the PC71BM acceptor was gradually controlled. As the phase separation was smaller, the dark current gradually reduced while the responsivity increased, leading to a higher detectivity. Complex charge-transporting paths formed under the fine percolating network account for the dark current reduction, while the increased heterojunction area facilitates the dissociation of the photogenerated excitons. From our thermal admittance spectroscopy, deeper sub-bandgap states were found under the smaller phase separation, further contributing to the dark current reduction. Second, the carrier injection effect was revealed by inserting a charge-blocking layer at the active layer/electrode interface. While manipulating both parameters could yield a high near-infrared detectivity up to 10(12) Jones at -0.5 V, the blending morphology effect turns out to be more dominant over the carrier injection effect in suppressing the dark current and achieving higher detectivity in BHJ OPDs.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available