☆ 4.6 Article

3D-Printed Programmable Mechanical Metamaterials for Vibration Isolation and Buckling Control

SUSTAINABILITY (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Ultra-low frequency vibration control of urban rail transit: the general quasi-zero-stiffness vibration isolator

Liuchong Wang et al.

Summary: This study proposed a general quasi-zero-stiffness vibration isolator to enhance the vibration control capability of floating slab tracks at low frequencies. Results showed that the isolator effectively reduced force transmissibility at low frequencies. Compared to conventional linear steel spring vibration isolators, the proposed isolator significantly improved vibration reduction performance at ultra-low frequencies without impacting driving stability or safety.

VEHICLE SYSTEM DYNAMICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Crushing behaviors of buckling-oriented hexagonal lattice structures

Jianhua Dong et al.

Summary: The study focused on buckling-oriented hexagonal lattice structures (BOHLS) made of AISI 316 L for energy absorption in engineering. Quasi-static compression experiments and numerical investigations were conducted to compare the performance of BOHLS and hexagonal lattice structure (HLS) in different compression directions. The results showed that BOHLS had better performance in terms of specific energy absorption and mean crushing force under quasi-static in-plane compression, while HLS outperformed BOHLS in quasi-static out-of-plane compression.

MECHANICS OF MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Crashworthiness analysis of cylindrical tubes with coupling effects under quasi-static axial loading: An experimental and numerical study

Hassan Mansoori et al.

Summary: This paper introduces a new assembly method using two concentric cylindrical tubes to increase energy-absorption capacity by coupling effects. The results show that this method not only avoids negative stiffness, but also enhances energy-absorption capacity.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2022)

Add to Collection

Article Instruments & Instrumentation

3D-printed bio-inspired zero Poisson's ratio graded metamaterials with high energy absorption performance

Ramin Hamzehei et al.

Summary: This study introduces a novel type of two-dimensional graded metamaterials with zero Poisson's ratio for energy absorption applications. Inspired by the 2D image of a DNA molecule, these metamaterials are designed with re-entrant unit cells that result in a zero Poisson's ratio behavior. The energy absorption capacity of the metamaterials is enhanced by incorporating slots and horizontal beams, taking inspiration from the DNA molecule's base pairs.

SMART MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Effects of different configurations and gradients on compression responses of gradient honeycombs via selective laser melting

Yunfeng Wei et al.

Summary: The study found that small wall thickness of honeycomb components caused pore defects and reduced material density. Different configurations and gradients significantly affected the compression behavior of gradient honeycombs. The symmetric positive gradient (SP) configuration showed the most excellent compression performance.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Biomedical

In vitro static and dynamic cell culture study of novel bone scaffolds based on 3D-printed PLA and cell-laden alginate hydrogel

Reza Noroozi et al.

Summary: The aim of this study was to design and fabricate a novel composite scaffold using 3D-printed polylactic acid-based triply periodic minimal surfaces (TPMSs) and cell-laden alginate hydrogel. The scaffold improved the mechanical properties and pore size suitability for bone regeneration applications. The study used an implicit function and fused deposition modeling to generate and print the TPMS scaffolds. Micro computed tomography was employed to assess the microstructure, while compression tests were conducted to investigate the mechanical properties. The study also examined the biological response in terms of cell viability, proliferation, and attachment, and compared the results to scaffolds without alginate.

BIOMEDICAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical homogenization of a linearly elastic honeycomb lattice structure and with and results

Mohammadreza Moeini et al.

Summary: This paper presents a verification and validation analysis of Finite Element (FE) models predicting the mechanical response of linearly elastic honeycomb structures. The numerical homogenization models can predict the apparent in-plane stiffness in structures made of 37 cells within 4%, while the discrepancy increases to 70% when 13 cells are considered.

MECHANICS OF MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Drop-weight impact testing for the study of energy absorption in automobile crash boxes made of composite material

N. Nasir Hussain et al.

Summary: The study investigates the effectiveness of different triggers combined with various geometries in glass fiber reinforced plastic crash boxes through drop-weight impact testing.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2021)

Add to Collection

Article Mechanics

Acoustic emission wave propagation in honeycomb sandwich panel structures

Ahmed H. Abdulaziz et al.

Summary: This paper investigates the propagation of acoustic emission waves in a glass fibre aluminium honeycomb sandwich panel, quantifying the through-thickness propagation of AE from one surface to the other. The results show that AE propagating in an HSP becomes bound in the outer plates due to complex interactions with the structural elements, providing insight into attenuation rates and characteristics for practical applications.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

An improved quasi-zero stiffness isolator with two pairs of oblique springs to increase isolation frequency band

Feng Zhao et al.

Summary: A new improved QZS isolator is proposed in this study, utilizing two pairs of oblique springs to significantly increase the isolation frequency band by reducing static deflection. The new isolator introduces novel formulations for stiffness and displacement transmissibility and the benefits of the design are verified through experiments and theoretical comparisons.

NONLINEAR DYNAMICS (2021)

Add to Collection

Article Optics

Microfluid-based soft metasurface for tunable optical activity in THz wave

Wu Zhang et al.

Summary: In this study, a tunable optical activity in a terahertz wave was achieved through a microfluid-based soft metasurface, demonstrating polarization rotation. The soft metasurface can be flexibly applied in various fields such as polarization microscopy, bio-detection, and material analysis.

OPTICS EXPRESS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Design and modeling of the 2D auxetic metamaterials with hyperelastic properties using topology optimization approach

Saeed Rezaei et al.

Summary: The paper utilized the modified SIMP topology optimization method to investigate the impact of diverse auxetic unit cells with different volume fractions on 2D auxetic structures composed of symmetric, chiral and re-entrant unit cells. 3D printed auxetic structures were compression tested to validate the TO results.

PHOTONICS AND NANOSTRUCTURES-FUNDAMENTALS AND APPLICATIONS (2021)

Add to Collection

Article Engineering, Mechanical

Nonlinear Vibration Control Device for a Vehicle Suspension Using Negative Stiffness Mechanism

Saurabh Suman et al.

Summary: The vibration suspension system in automobiles can mitigate excitations. This study designed a nonlinear vibration isolation system with QZS behavior, achieving negative stiffness through inclined spring arrangement and positive stiffness from the pneumatic system. Results showed high isolation capability at higher velocities.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tailored Mechanical Metamaterials with Programmable Quasi-Zero-Stiffness Features for Full-Band Vibration Isolation

Quan Zhang et al.

Summary: A new design strategy for a programmable quasi-zero-stiffness (QZS) mechanical metamaterial is proposed in this research, which can achieve tailored stair-stepping force-displacement curves with multiple QZS working ranges and ultra-low frequency vibration isolation capability. The mechanism solely depends on the structural geometry of curved beams and is materials-independent, opening up a new avenue for innovating compact and scalable QZS isolators.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Mechanics

Shape optimisation and buckling analysis of large strain zero Poisson's ratio fish-cells metamaterial for morphing structures

Ashutosh Jha et al.

Summary: This article investigates the potential of a large strain morphing skin based on a Zero Poisson's Ratio (ZPR) Fish-Cells metamaterial. A multi-objective genetic algorithm shape optimisation is performed to improve the ZPR characteristics of the Fish-Cells metamaterial, with detailed joint design study to obtain consistent ZPR behaviour over a maximum strain range. The study provides insight into the non-linear behavior of the Fish-Cells ZPR metamaterial and evaluates its performance as a candidate skin for a morphing aircraft wing.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Multidisciplinary Sciences

Metamaterials for simultaneous acoustic and elastic bandgaps

Waiel Elmadih et al.

Summary: This study introduces a single low-profile metamaterial that can provide bandgaps for both acoustic and elastic waves simultaneously. Through creative design, waves of specific nature and frequencies can be completely blocked in both solid and fluid domains, with the parameters being adjustable for tuning both acoustic and elastic bandgaps.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Topology-Optimized 4D Printing of a Soft Actuator

Ali Zolfagharian et al.

ACTA MECHANICA SOLIDA SINICA (2020)

Add to Collection

Article Mechanics

Design and numerical validation of quasi-zero-stiffness metamaterials for very low-frequency band gaps

Changqi Cai et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

2D triangular anti-trichiral structures and auxetic stents with symmetric shrinkage behavior and high energy absorption

Ramin Hamzehei et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Physics, Fluids & Plasmas

A tunable double negative device consisting of a plasma array and a negative-permeability metamaterial

Akinori Iwai et al.

PHYSICS OF PLASMAS (2020)

Add to Collection

Article Instruments & Instrumentation

Analytical modeling and design of negative stiffness honeycombs

Altay Zhakatayev et al.

SMART MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Polymer Science

Shape-Adaptive Metastructures with Variable Bandgap Regions by 4D Printing

Reza Noroozi et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Mechanical

Reversible energy absorbing meta-sandwiches by FDM 4D printing

M. Bodaghi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Mechanics

Design of metastructures with quasi-zero dynamic stiffness for vibration isolation

Haigui Fan et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

A semi-active metamaterial beam with electromagnetic quasi-zero-stiffness resonators for ultralow-frequency band gap tuning

Kai Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Civil

In-plane crushing behavior of density graded cross-circular honeycombs with zero Poisson's ratio

Hexiang Wu et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Investigations of the compressive mechanical properties of open-cell hollow-sphere structures

Meiling Dai et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Agricultural Engineering

Experimental study on driver seat vibration characteristics of crawler-type combine harvester

Lizhang Xu et al.

INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of geometry on the flexural properties of cellular core structures

H. Araujo et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2019)

Add to Collection

Article Engineering, Mechanical

Octagonal auxetic metamaterials with hyperelastic properties for large compressive deformation

Ramin Hamzehei et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Physics, Applied

Single mode to dual mode switch through a THz reconfigurable metamaterial

Wu Zhang et al.

APPLIED PHYSICS LETTERS (2017)

Add to Collection

Article Engineering, Civil

Dynamic local and global buckling of cylindrical shells under axial impact

Xinsheng Xu et al.

ENGINEERING STRUCTURES (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.