Related references
Note: Only part of the references are listed.Heteroatoms-doped porous carbon electrodes with three-dimensional self-supporting structure derived from cotton fabric for high-performance wearable supercapacitors
Chao Sun et al.
JOURNAL OF POWER SOURCES (2021)
Electrochemical flow injection analysis for the rapid determination of reducing sugars in potatoes
Wesley McCormick et al.
FOOD CHEMISTRY (2021)
Simultaneous voltammetric determination of epinephrine and acetaminophen using a highly sensitive CoAl-OOH/reduced graphene oxide sensor in pharmaceutical samples and biological fluids
Chengke Wu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Recent advances in carbon nanostructures prepared from carbon dioxide for high-performance supercapacitors
Chen Li et al.
JOURNAL OF ENERGY CHEMISTRY (2021)
Sodium-Ion Battery Anode Construction with SnPx Crystal Domain in Amorphous Phosphorus Matrix
Baixu Chen et al.
ENERGY MATERIAL ADVANCES (2021)
Spin-coated copper(I) thiocyanate as a hole transport layer for perovskite solar cells
Utku Er et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2020)
Recent progress in development of diverse kinds of hole transport materials for the perovskite solar cells: A review
Zahra Shariatinia
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Cu2ZnSnS4 as an efficient hole transporting material for low temperature paintable carbon electrode based perovskite solar cells
Yang Cao et al.
ORGANIC ELECTRONICS (2020)
Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
Mark V. Khenkin et al.
NATURE ENERGY (2020)
Dopant-free methoxy substituted copper(II) phthalocyanine for highly efficient and stable perovskite solar cells
Xingdong Ding et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Air-processed carbon-based perovskite solar cells with enhanced efficiency and stability: Effect of temperature control and using CuSCN
Yanqi Lv et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Numerical simulation of perovskite/Cu2Zn(Sn1-x Gex)S4 interface to enhance the efficiency by valence band offset engineering
Muazma Jamil et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Two-phase synthesized Cu2ZnSnS4 nanoparticles as inorganic hole-transporting material of paintable carbon-based perovskite solar cells
Ali Mashreghi et al.
SOLAR ENERGY (2020)
Design of hole-transport-material free CH3NH3PbI3/CsSnI3 all-perovskite heterojunction efficient solar cells by device simulation
Qianqian Duan et al.
SOLAR ENERGY (2020)
MAI Termination Favors Efficient Hole Extraction and Slow Charge Recombination at the MAPbI3/CuSCN Heterojunction
Jinlu He et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)
Perovskite Solar Cells Based on Compact, Smooth FA0.1MA0.9PbI3 Film with Efficiency Exceeding 22%
Ayman Maqsood et al.
NANOSCALE RESEARCH LETTERS (2020)
Hysteresis Behavior in the Sorption Equilibrium of Water in Anodes for Li-Ion Batteries
Jochen C. Eser et al.
LANGMUIR (2020)
The influence of fullerene on hysteresis mechanism in planar perovskite solar cells
Man Yu et al.
CHEMICAL PHYSICS LETTERS (2020)
Yttrium trihydride enhanced lithium storage in carbon materials
Xinyao Zheng et al.
CARBON (2020)
Towards high performance visible-blind narrowband near-infrared photodetectors with integrated perovskite light filter
Qinyong Dai et al.
INFRARED PHYSICS & TECHNOLOGY (2020)
An inverted BiI3/PCBM binary quasi-bulk heterojunction solar cell with a power conversion efficiency of 1.50%
Jian Kang et al.
NANO ENERGY (2020)
Recent Development in Earth-Abundant Kesterite Materials and Their Applications
Ahmet Sencer Nazligul et al.
SUSTAINABILITY (2020)
Hybrid interfacial ETL engineering using PCBM-SnS 2 for High -Performance p-i-n structured planar perovskite solar cells
Pramila Patil et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Structure optimization of CH3NH3PbI3 by higher-valence Pb in perovskite solar cells with enhanced efficiency and stability
Bing Liu et al.
SOLAR ENERGY (2020)
Optimization of Cathode Material Components by Means of Experimental Design for Li-Ion Batteries
Amir Reza Fathi et al.
JOURNAL OF ELECTRONIC MATERIALS (2020)
Tetra and octa substituted Zn(II) and Cu(II) phthalocyanines: Synthesis, characterization and investigation as hole-transporting materials for inverted type-perovskite solar cells
Zeynep Dalkilic et al.
JOURNAL OF ORGANOMETALLIC CHEMISTRY (2020)
Role of various transport layer and electrode materials in enhancing performance of stable environment -friendly Cs 2 TiBr 6 solar cell
Madhupriya Samanta et al.
OPTIK (2020)
A high performance flexible gel polymer electrolyte incorporated with suberonitrile as additive for quasi-solid carbon supercapacitor
Md Yasir Bhat et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)
Influence of the cathode microstructure on the stability of inverted planar perovskite solar cells
Svetlana Sirotinskaya et al.
RSC ADVANCES (2020)
Effective Carbon Composite Electrode for Low-Cost Perovskite Solar Cell with Inorganic CuIn0.75Ga0.25S2 Hole Transport Material
Fatemeh Behrouznejad et al.
SOLAR RRL (2020)
Molecularly engineered hole-transport material for low-cost perovskite solar cells
Babak Pashaei et al.
CHEMICAL SCIENCE (2020)
Hole transporting materials for perovskite solar cells and a simple approach for determining the performance limiting factors
Abasi Abudulimu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Metallated Macrocyclic Derivatives as a Hole - Transporting Materials for Perovskite Solar Cells
Govind Reddy et al.
CHEMICAL RECORD (2019)
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Ajay Kumar Jena et al.
CHEMICAL REVIEWS (2019)
Applied rheology and architectural coating performance
Richard R. Eley
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2019)
Highly stable hole-conductor-free perovskite solar cells based upon ammonium chloride and a carbon electrode
Beibei Zong et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Eui Hyuk Jung et al.
NATURE (2019)
Carbon-chain length substituent effects on Cu(II) phthalocyanines as dopant-free hole-transport materials for perovskite solar cells
Yaomiao Feng et al.
SOLAR ENERGY (2019)
Multifunctional Synthesis Approach of In:CuCrO2 Nanoparticles for Hole Transport Layer in High-Performance Perovskite Solar Cells
Boping Yang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Copper Thiocyanate and Copper Selenocyanate Hole Transport Layers: Determination of Band Offsets with Silicon and Hybrid Perovskites from First Principles
Muhammad Sajjad et al.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2019)
Double-walled carbon nanotubes, a performing additive to enhance capacity retention of antimony anode in potassium-ion batteries
Vincent Gabaudan et al.
ELECTROCHEMISTRY COMMUNICATIONS (2019)
Hole transport materials doped to absorber film for improving the performance of the perovskite solar cells
Qintao Wang et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2019)
Carbon-Based Electrode Engineering Boosts the Efficiency of All Low-Temperature Processed Perovskite Solar Cells
Sisi He et al.
ACS ENERGY LETTERS (2019)
Needle coke: A predominant carbon black alternative for printable triple mesoscopic perovskite solar cells
Ya Zhong et al.
CARBON (2019)
High-performance carbon electrode-based CsPbI2Br inorganic perovskite solar cell based on poly(3-hexylthiophene)-carbon nanotubes composite hole-transporting layer
Guiqiang Wang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Performance analysis of MAPbI3 based perovskite solar cells employing diverse charge selective contacts: Simulation study
Yassine Raoui et al.
SOLAR ENERGY (2019)
Highly stable carbon-based perovskite solar cell with a record efficiency of over 18% via hole transport engineering
Qian-Qian Chu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Occurrence of the potent mutagens 2-nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particles
Aldenor G. Santos et al.
SCIENTIFIC REPORTS (2019)
Perovskite Solar Cells: 18% Efficiency Using Zn(II) and Cu(II) Octakis(diarylamine)phthalocyanines as Hole-Transporting Materials
Kyung Taek Cho et al.
ACS APPLIED ENERGY MATERIALS (2019)
Carbon Materials in Perovskite Solar Cells: Prospects and Future Challenges
Victoria Ferguson et al.
ENERGY & ENVIRONMENTAL MATERIALS (2019)
Carbon-based perovskite solar cells: From single-junction to modules
Rui He et al.
CARBON ENERGY (2019)
Current progress in interfacial engineering of carbon-based perovskite solar cells
Fanning Meng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Carbon-based materials for stable, cheaper and large-scale processable perovskite solar cells
Lucia Fagiolari et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Cu2ZnSnS4 Quantum Dots as Hole Transport Material for Enhanced Charge Extraction and Stability in All-Inorganic CsPbBr3 Perovskite Solar Cells
Zheng-Ji Zhou et al.
SOLAR RRL (2019)
Molecular doping of CuSCN for hole transporting layers in inverted-type planar perovskite solar cells
In Su Jin et al.
INORGANIC CHEMISTRY FRONTIERS (2019)
Recent Advances in Spiro-MeOTAD Hole Transport Material and Its Applications in Organic-Inorganic Halide Perovskite Solar Cells
Zafer Hawash et al.
ADVANCED MATERIALS INTERFACES (2018)
Improved Stability of Interfacial Energy-Level Alignment in Inverted Planar Perovskite Solar Cells
Soeun Im et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Fully printable perovskite solar cells with highly-conductive, low-temperature, perovskite-compatible carbon electrode
Pei Jiang et al.
CARBON (2018)
Solution-processed Kesterite Cu2ZnSnS4 as Efficient Hole Extraction Layer for Inverted Perovskite Solar Cells
Xin Li et al.
CHEMISTRY LETTERS (2018)
Carbon based perovskite solar cells constructed by screen-printed components
Camellia Raminafshar et al.
ELECTROCHIMICA ACTA (2018)
All low-temperature processed carbon-based planar heterojunction perovskite solar cells employing Mg-doped rutile TiO2 as electron transport layer
Xingyue Liu et al.
ELECTROCHIMICA ACTA (2018)
The Influence of the Work Function of Hybrid Carbon Electrodes on Printable Mesoscopic Perovskite Solar Cells
Pei Jiang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Spray coating of the PCBM electron transport layer significantly improves the efficiency of p-i-n planar perovskite solar cells
Yifan Zheng et al.
NANOSCALE (2018)
Effect of the vapor diffusion and improved light harvesting for Perovskite-Cu2ZnSnS4 hybridized solar cells
Shih-Jen Lin et al.
ORGANIC ELECTRONICS (2018)
An effective TiO2 blocking layer for hole-conductor-free perovskite solar cells based on carbon counter electrode
Huijing Liu et al.
ORGANIC ELECTRONICS (2018)
Review of recent developments and persistent challenges in stability of perovskite solar cells
B. Salhi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Deying Luo et al.
SCIENCE (2018)
High permeable microporous structured carbon counter electrode assisted by polystyrene sphere for fully printable perovskite solar cells
Haijun Tao et al.
SOLID STATE COMMUNICATIONS (2018)
Low-Temperature Solution-Processed CuCrO2 Hole-Transporting Layer for Efficient and Photostable Perovskite Solar Cells
Hua Zhang et al.
ADVANCED ENERGY MATERIALS (2018)
Cost effective perovskite solar cells with a high efficiency and open-circuit voltage based on a perovskite-friendly carbon electrode
Qian-Qian Chu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
15% efficient carbon based planar-heterojunction perovskite solar cells using a TiO2/SnO2 bilayer as the electron transport layer
Zhiyong Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Room-temperature fabrication of a delafossite CuCrO2 hole transport layer for perovskite solar cells
Wiley A. Dunlap-Shohl et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
17.46% efficient and highly stable carbon-based planar perovskite solar cells employing Ni-doped rutile TiO2 as electron transport layer
Xingyue Liu et al.
NANO ENERGY (2018)
Efficiently Improving the Stability of Inverted Perovskite Solar Cells by Employing Polyethylenimine-Modified Carbon Nanotubes as Electrodes
Yu Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Enhanced hole transfer in hole-conductor-free perovskite solar cells via incorporating CuS into carbon electrodes
Ruiyuan Hu et al.
APPLIED SURFACE SCIENCE (2018)
Dependence of power conversion properties of the hole-conductor-free mesoscopic perovskite solar cells on the thickness of carbon film
Kangming Li et al.
ORGANIC ELECTRONICS (2018)
Enhanced efficiency and stability of fully air-processed TiO2 nanorods array, based perovskite solar cell using commercial available CuSCN and carbon
Yanqi Lv et al.
SOLAR ENERGY (2018)
Design of two novel hole transport materials via replacing the core of spiro-OMeTAD with tetrathiafulvalene and tetraazafulvalene for application in perovskite solar cells
Habib Ashassi-Sorkhabi et al.
SOLAR ENERGY (2018)
Resolving a Critical Instability in Perovskite Solar Cells by Designing a Scalable and Printable Carbon Based Electrode-Interface Architecture
Sara Mashhoun et al.
ADVANCED ENERGY MATERIALS (2018)
p-Type CuCrO2 particulate films as the hole transporting layer for CH3NH3PbI3 perovskite solar cells
Seonghwa Jeong et al.
RSC ADVANCES (2018)
All that glitters is not gold: Recent progress of alternative counter electrodes for perovskite solar cells
Lusheng Liang et al.
NANO ENERGY (2018)
Oxygen management in carbon electrode for high-performance printable perovskite solar cells
Chengbo Tian et al.
NANO ENERGY (2018)
Metallophthalocyanine-Based Molecular Dipole Layer as a Universal and Versatile Approach to Realize Efficient and Stable Perovskite Solar Cells
Fangchao Li et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Functional materials, device architecture, and flexibility of perovskite solar cell
Istiak Hussain et al.
EMERGENT MATERIALS (2018)
Hydrothermally processed CuCrO2 nanoparticles as an inorganic hole transporting material for low-cost perovskite solar cells with superior stability
Seckin Akin et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Highly Efficient, Solution-Processed Organic Light-Emitting Diodes Based on Thermally Activated Delayed-Fluorescence Emitter with a Mixed Polymer Interlayer
Yanwei Liu et al.
ACS APPLIED ENERGY MATERIALS (2018)
Metal ions diffusion at heterojunction chromium Oxide/CH3NH3PbI3 interface on the stability of perovskite solar cells
Pingli Qin et al.
SURFACES AND INTERFACES (2018)
CuGaO2: A Promising Inorganic Hole-Transporting Material for Highly Efficient and Stable Perovskite Solar Cells
Hua Zhang et al.
ADVANCED MATERIALS (2017)
Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells
Juan-Pablo Correa-Baena et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
The effect of graphite and carbon black ratios on conductive ink performance
Chris Phillips et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Polymorphism of Two-Dimensional Halogen Bonded Supramolecular Networks on a Graphene/Iridium(111) Surface
Muriel Sicot et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells
Yaoguang Rong et al.
NATURE COMMUNICATIONS (2017)
Low-Cost Alternative High-Performance Hole-Transport Material for Perovskite Solar Cells and Its Comparative Study with Conventional SPIRO-OMeTAD
Hong Duc Pham et al.
ADVANCED ELECTRONIC MATERIALS (2017)
Boron-Doped Graphite for High Work Function Carbon Electrode in Printable Hole-Conductor-Free Mesoscopic Perovskite Solar Cells
Miao Duan et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Interfacial Investigation on Printable Carbon-Based Mesoscopic Perovskite Solar Cells with NiOx/C Back Electrode
Fatemeh Behrouznejad et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Efficient hole-conductor-free, fully printable mesoscopic perovskite solar cells with carbon electrode based on ultrathin graphite
Miao Duan et al.
CARBON (2017)
High-Performance Rigid and Flexible Perovskite Solar Cells with Low-Temperature Solution-Processable Binary Metal Oxide Hole-Transporting Materials
Ping-Li Qin et al.
SOLAR RRL (2017)
CH3NH3PbBr3-CH3NH3PbI3 Perovskite-Perovskite Tandem Solar Cells with Exceeding 2.2 V Open Circuit Voltage
Jin Hyuck Heo et al.
ADVANCED MATERIALS (2016)
Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells
Jin-Wook Lee et al.
ACCOUNTS OF CHEMICAL RESEARCH (2016)
Dominant Factors Governing the Electron Transfer Kinetics and Electrochemical Biosensing Properties of Carbon Nanofiber Arrays
Liangsheng Hu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Konrad Domanski et al.
ACS NANO (2016)
Effective Ligand Engineering of the Cu2ZnSnS4 Nanocrystal Surface for Increasing Hole Transport Efficiency in Perovskite Solar Cells
Laraib Sarfraz Khanzada et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Controlling the Band Gap to Improve Open-Circuit Voltage in Metal Chalcogenide based Perovskite Solar Cells
Meng Yuan et al.
ELECTROCHIMICA ACTA (2016)
Using a low-temperature carbon electrode for preparing hole-conductor-free perovskite heterojunction solar cells under high relative humidity
Zhiyong Liu et al.
NANOSCALE (2016)
Inverted Perovskite Solar Cells: Progresses and Perspectives
Tanghao Liu et al.
ADVANCED ENERGY MATERIALS (2016)
Boosting the efficiency and the stability of low cost perovskite solar cells by using CuPc nanorods as hole transport material and carbon as counter electrode
Fuguo Zhang et al.
NANO ENERGY (2016)
Kesterite Cu2ZnSnS4 as a Low-Cost Inorganic Hole-Transporting Material for High-Efficiency Perovskite Solar Cells
Qiliang Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Free-standing flexible carbon electrode for highly efficient hole-conductor-free perovskite solar cells
Huiyun Wei et al.
CARBON (2015)
Enhancing the Performance of a Robust Sol-Gel-Processed p-Type Delafossite CuFeO2 Photocathode for Solar Water Reduction
Mathieu S. Prevot et al.
CHEMSUSCHEM (2015)
Molecular Engineering of Functional Materials for Energy and Opto-Electronic Applications
Peng Gao et al.
CHIMIA (2015)
Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency
Jin Hyuck Heo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Efficient All-Printable Solid-State Dye-Sensitized Solar Cell Based on a Low-Resistivity Carbon Composite Counter Electrode and Highly Doped Hole Transport Material
Timothy W. Jones et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Low-Temperature Processed and Carbon-Based ZnO/CH3NH3Pbl3/C Planar Heterojunction Perovskite Solar Cells
Huawei Zhou et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Control of I-V Hysteresis in CH3NH3PbI3 Perovskite Solar Cell
Hui-Seon Kim et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Hole Selective NiO Contact for Efficient Perovskite Solar Cells with Carbon Electrode
Xiaobao Xu et al.
NANO LETTERS (2015)
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Woon Seok Yang et al.
SCIENCE (2015)
Efficient CH3NH3PbI3 Perovskite Solar Cells Based on Graphdiyne (GD)-Modified P3HT Hole-Transporting Material
Junyan Xiao et al.
Advanced Energy Materials (2015)
An efficient hole transport material composite based on poly(3-hexylthiophene) and bamboo-structured carbon nanotubes for high performance perovskite solar cells
Molang Cai et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
The effect of carbon counter electrodes on fully printable mesoscopic perovskite solar cells
Lijun Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Efficient screen printed perovskite solar cells based on mesoscopic TiO2/Al2O3/NiO/ carbon architecture
Kun Cao et al.
NANO ENERGY (2015)
Stable and Low-Cost Mesoscopic CH3NH3PbI2Br Perovskite Solar Cells by using a Thin Poly(3-hexylthiophene) Layer as a Hole Transporter
Meng Zhang et al.
CHEMISTRY-A EUROPEAN JOURNAL (2015)
Quantum-Dot-Based Solar Cells: Recent Advances, Strategies, and Challenges
Mee Rahn Kim et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Structure Engineering of Hole-Conductor Free Perovskite-Based Solar Cells with Low-Temperature-Processed Commercial Carbon Paste As Cathode
Fuguo Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Impedance Spectroscopic Analysis of Lead Iodide Perovskite-Sensitized Solid-State Solar Cells
Amalie Dualeh et al.
ACS NANO (2014)
Nickel Oxide Electrode Interlayer in CH3NH3PbI3 Perovskite/PCBM Planar-Heterojunction Hybrid Solar Cells
Jun-Yuan Jeng et al.
ADVANCED MATERIALS (2014)
Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells
Zhanhua Wei et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Benefits of very thin PCBM and LiF layers for solution-processed p-i-n perovskite solar cells
Jangwon Seo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Hole-Conductor-Free, Metal-Electrode-Free TiO2/CH3NH3PbI3 Heterojunction Solar Cells Based on a Low-Temperature Carbon Electrode
Huawei Zhou et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells
Nam Joong Jeon et al.
NATURE MATERIALS (2014)
Cu(I)-based delafossite compounds as photocathodes in p-type dye-sensitized solar cells
Mingzhe Yu et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Interface engineering of highly efficient perovskite solar cells
Huanping Zhou et al.
SCIENCE (2014)
Effect of CH3NH3PbI3 thickness on device efficiency in planar heterojunction perovskite solar cells
Dianyi Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
CH3NH3PbI3 Perovskite/Fullerene Planar-Heterojunction Hybrid Solar Cells
Jun-Yuan Jeng et al.
ADVANCED MATERIALS (2013)
FeS2 Nanocrystal Ink as a Catalytic Electrode for Dye-Sensitized Solar Cells
Ying-Chiao Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
An efficient thiolate/disulfide redox couple based dye-sensitized solar cell with a graphene modified mesoscopic carbon counter electrode
Guanghui Liu et al.
CARBON (2013)
High performance hybrid solar cells sensitized by organolead halide perovskites
Bing Cai et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Monolithic quasi-solid-state dye-sensitized solar cells based on graphene-modified mesoscopic carbon-counter electrodes
Yaoguang Rong et al.
JOURNAL OF NANOPHOTONICS (2013)
Effect of Different Hole Transport Materials on Recombination in CH3NH3PbI3 Perovskite-Sensitized Mesoscopic Solar Cells
Dongqin Bi et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
High Efficiency Solid-State Sensitized Solar Cell-Based on Submicrometer Rutile TiO2 Nanorod and CH3NH3PbI3 Perovskite Sensitizer
Hui-Seon Kim et al.
NANO LETTERS (2013)
High-Performance Perovskite-Polymer Hybrid Solar Cells via Electronic Coupling with Fullerene Monolayers
Agnese Abrusci et al.
NANO LETTERS (2013)
Efficient and stable CH3NH3PbI3-sensitized ZnO nanorod array solid-state solar cells
Dongqin Bi et al.
NANOSCALE (2013)
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka et al.
NATURE (2013)
Efficient monolithic solid-state dye-sensitized solar cell with a low-cost mesoscopic carbon based screen printable counter electrode
Mi Xu et al.
ORGANIC ELECTRONICS (2013)
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3
Guichuan Xing et al.
SCIENCE (2013)
Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber
Samuel D. Stranks et al.
SCIENCE (2013)
Full Printable Processed Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells with Carbon Counter Electrode
Zhiliang Ku et al.
SCIENTIFIC REPORTS (2013)
A mesoscopic platinized graphite/carbon black counter electrode for a highly efficient monolithic dye-sensitized solar cell
Guanghui Liu et al.
ELECTROCHIMICA ACTA (2012)
Hierarchical porous carbon with graphitic structure synthesized by a water soluble template method
Naiqin Zhao et al.
MATERIALS LETTERS (2012)
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Hui-Seon Kim et al.
SCIENTIFIC REPORTS (2012)
Understanding the p-type defect chemistry of CuCrO2
David O. Scanlon et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Effect of Carbon Black Addition on the Rheology Properties of Electrically Conductive PP-Graphite Composite
Yovial Mahyoedin et al.
FUNDAMENTAL OF CHEMICAL ENGINEERING, PTS 1-3 (2011)
Parallel-connected monolithic dye-sensitised solar modules
Henrik Pettersson et al.
PROGRESS IN PHOTOVOLTAICS (2010)
Spin-driven ferroelectricity in triangular lattice antiferromagnets ACrO2 (A=Cu, Ag, Li, or Na)
S. Seki et al.
PHYSICAL REVIEW LETTERS (2008)
Crystal chemistry and electrical properties of the delafossite structure
MA Marquardt et al.
THIN SOLID FILMS (2006)
Electrical conductivity of carbon blacks under compression
J Sanchez-Gonzalez et al.
CARBON (2005)
Electrical conductivity of conductive carbon blacks: influence of surface chemistry and topology
D Pantea et al.
APPLIED SURFACE SCIENCE (2003)