Related references
Note: Only part of the references are listed.Melt Conveying in Single-Screw Extruders: Modeling and Simulation
Christian Marschik et al.
POLYMERS (2022)
Experimental and Theoretical Study of Polymer Melting in a Co-rotating Twin Screw Extruder
B. Vergnes et al.
INTERNATIONAL POLYMER PROCESSING (2022)
A Composite Model for Melting, Pressure and Fill Factor Profiles in a Metered Fed Closely Intermeshing Counter-rotating Twin Screw Extruder
K. Wilczynski et al.
INTERNATIONAL POLYMER PROCESSING (2022)
A Computer Model of Starve Fed Single Screw Extrusion of Wood Plastic Composites
Krzysztof J. Wilczynski et al.
POLYMERS (2021)
A Strategy for Problem Solving of Filling Imbalance in Geometrically Balanced Injection Molds
Krzysztof Wilczynski et al.
POLYMERS (2020)
The Modelling of Extrusion Processes for Polymers-A Review
Marko Hyvarinen et al.
POLYMERS (2020)
Practical simulation and experimental measurement of liquid crystal polymer directionality during injection molding
Anthony Sullivan et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Simulation Studies on the Effect of Material Characteristics and Runners Layout Geometry on the Filling Imbalance in Geometrically Balanced Injection Molds
Krzysztof Wilczynski et al.
POLYMERS (2019)
Gelation of poly(vinyl chloride) inside a single screw extruder and its effect on product properties
Abdullah Demirci et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2019)
Fundamentals of Global Modeling for Polymer Extrusion
Krzysztof Wilczynski et al.
POLYMERS (2019)
Modeling and Optimization of the Injection-Molding Process: A Review
Celio Fernandes et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Experimental and Theoretical Study on Screw Filling in Starve Fed Single Screw Extruders
K. J. Wilczynski
INTERNATIONAL POLYMER PROCESSING (2018)
General model of polymer melting in extrusion process
Adrian Lewandowski et al.
POLIMERY (2018)
General model of polymer melting in extrusion process
Adrian Lewandowski et al.
POLIMERY (2018)
Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds
J. Trippe et al.
INTERNATIONAL POLYMER PROCESSING (2018)
Experimentally Verified Mathematical Model of Polymer Plasticization Process in Injection Molding
Jacek Iwko et al.
POLYMERS (2018)
Vortical Fountain Flows in Plasticating Screws
David O. Kazmer et al.
POLYMERS (2018)
A computer model for starve-fed single-screw extrusion of polymer blends
Krzysztof J. Wilczynski et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
A Global Model for Starve-Fed Nonconventional Single-Screw Extrusion of Thermoplastics
Krzysztof J. Wilczynski et al.
ADVANCES IN POLYMER TECHNOLOGY (2017)
Modeling for Starve Fed/Flood Fed Mixing Single-Screw Extruders
K. J. Wilczynski et al.
INTERNATIONAL POLYMER PROCESSING (2016)
Experimental Study of Melting of Polymer Blends in a Starve Fed Single Screw Extruder
Krzysztof J. Wilczynski et al.
POLYMER ENGINEERING AND SCIENCE (2016)
Experimental verification of computer model for polymer plastication process in injection molding
Jacek Iwko et al.
POLIMERY (2015)
A Composite Model for an Intermeshing Counter-Rotating Twin-Screw Extruder and Its Experimental Verification
Adrian Lewandowski et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Experimental verification of computer model for polymer plastication process in injection molding
Jacek Iwko et al.
POLIMERY (2015)
Modeling of Plasticating Injection Molding - Experimental Assessment
C. Fernandes et al.
INTERNATIONAL POLYMER PROCESSING (2014)
Simulation of Co-Rotating Twin Screw Extrusion Process Subject to Pressure-Dependent Wall Slip at Barrel and Screw Surfaces: 3D FEM Analysis for Combinations of Forward- and Reverse-Conveying Screw Elements
M. Malik et al.
INTERNATIONAL POLYMER PROCESSING (2014)
A Composite Model for Starve Fed Single Screw Extrusion of Thermoplastics
Krzysztof J. Wilczynski et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Melting Model for Starve Fed Single Screw Extrusion of Thermoplastics
K. Wilczynski et al.
INTERNATIONAL POLYMER PROCESSING (2013)
In-line visualisation of polymer plastication in an injection moulding screw
T-L Pham et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
Modelling the Solids Throughput of Single Screw Smooth Barrel Extruders as a Function of the Feed Section Parameters
J. -S. Lessmann et al.
INTERNATIONAL POLYMER PROCESSING (2012)
Experimental study of melting of LDPE/PS polyblend in an intermeshing counter-rotating twin screw extruder
Krzysztof Wilczynski et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Experimental study for starve-fed single screw extrusion of thermoplastics
Krzysztof Wilczynski et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Multipurpose Computer Model for Screw Processing of Plastics
Krzysztof Wilczynski et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2012)
Flow and Heat Transfer Along the Length of a Co-rotating Twin Screw Extruder
Cristina Teixeira et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2012)
Melting in a Single Screw Extruder: Experiments and 3D Finite Element Simulations
A. Altinkaynak et al.
INTERNATIONAL POLYMER PROCESSING (2011)
MODELLING OF THE PROCESS OF POLYMERS PLASTICIZATION DURING INJECTION MOLDING. Part II. THE MELTING ZONE
Ryszard Steller et al.
POLIMERY (2011)
MODELLING OF THE POLYMER MELT FLOW IN A TWIN-SCREW COUNTER-ROTATING EXTRUSION PROCESS. Part II. SIMULATION AND EXPERIMENTAL STUDIES - VERIFICATION OF THE ADOPTED MODEL
Krzysztof Wilczynski et al.
POLIMERY (2011)
Review: Single Screw Extruder in Particulate Filler Composite
A. Ariffin et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2011)
A simple model of throughput and pressure development for single screw
Y. Bereaux et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Non-isothermal model for the drive power calculation of single-screw plasticating units
H. Potente et al.
INTERNATIONAL POLYMER PROCESSING (2008)
Polymer plastication during injection molding - Part 2 - Simulations and experiments
J. Iwko et al.
INTERNATIONAL POLYMER PROCESSING (2008)
Polymer plastication during injection molding - Part 1 - Mathematical model
R. Steller et al.
INTERNATIONAL POLYMER PROCESSING (2008)
Discrete particle simulations of solids compaction and conveying in a single-screw extruder
P. A. Moysey et al.
POLYMER ENGINEERING AND SCIENCE (2008)
MODELING OF THE PROCESS OF POLYMERS PLASTICIZATION DURING INJECTION MOLDING. PART I. MODEL ASSUMPTIONS AND SOLID POLYMER TRANSPORT
Ryszard Steller et al.
POLIMERY (2008)
Determining the collision properties of semi-crystalline and amorphous thermoplastics for DEM simulations of solids transport in an extruder
P. A. Moysey et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Experiments and analysis of effect of calender gaps on melting of PVC powders in an intermeshing counter-rotating twin-screw extruder
D Wang et al.
INTERNATIONAL POLYMER PROCESSING (2006)
Corotating twin-screw extrusion reactive extrusion-devolatilization model and software
JL White et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2006)
In-line monitoring and analysis of polymer melting behavior in an intermeshing counter-rotating twin-screw extruder by ultrasound waves
DB Wang et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Modelling the solids inflow and solids conveying of single-screw extruders using the discrete element method
PA Moysey et al.
POWDER TECHNOLOGY (2005)
Investigation of solids transport in a single-screw extruder using a 3-D discrete particle simulation
PA Moysey et al.
POLYMER ENGINEERING AND SCIENCE (2004)
An experimental study of solid-bed break-up in plasticization of a reciprocating-screw injection molding
ZM Jin et al.
POLYMER ENGINEERING AND SCIENCE (2004)
Melting model for intermeshing counter-rotating twin-screw extruders
K Wilczynski et al.
POLYMER ENGINEERING AND SCIENCE (2003)
Transient melting models for the three stages of reciprocating extrusion
KL Yung et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Plastic energy dissipation and its role on heating/melting of single-component polymers and multi-component polymer blends
BN Qian et al.
ADVANCES IN POLYMER TECHNOLOGY (2003)
Simulation of transient process in melting section of reciprocating extruder
KL Yung et al.
POLYMER (2002)
Analysis of a melting model for an extruder with reciprocation
KL Yung et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Modeling of particle-dispersed melting mechanism and its application in corotating twin-screw extrusion
LJ Zhu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2001)
Experimental study of melting in an intermeshing counter-rotating twin screw extruder
K Wilczynski et al.
INTERNATIONAL POLYMER PROCESSING (2001)
Melting and densification of thermoplastic powders
M Kontopoulou et al.
POLYMER ENGINEERING AND SCIENCE (2001)
Development of a global computer software for modular self-wiping corotating twin screw extruders
JL White et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2001)
A new approach for the simulation of melting in extruders
S Syrjälä
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2000)
A visual barrel system for study of reciprocating screw injection molding
FR Gao et al.
POLYMER ENGINEERING AND SCIENCE (2000)
Melting mechanism of a starved-fed single-screw extruder for calcium carbonate filled polyethylene
MR Thompson et al.
POLYMER ENGINEERING AND SCIENCE (2000)
Share Paper
