☆ 4.7 Article

Binocular Vision-Based Yarn Orientation Measurement of Biaxial Weft-Knitted Composites

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

A novel vision measurement system for health monitoring of tunnel structures

Xiangyang Xu et al.

Summary: Automation and intelligent health monitoring technologies are important for the development of rail transit operation and maintenance. The paper proposes a novel visual measurement technology for deformation monitoring of tunnel structures, which shows good potential for practical applications in terms of resolution and accuracy.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Mechanics

Deformation mechanisms of 3D LTL woven preforms in hemisphere forming tests

Wei Jiao et al.

Summary: This study investigates the hemisphere forming of 3D LTL preforms and analyzes the effect of structural parameters on the forming process. The results indicate that the weaving structure of the yarns is closely related to the reaction load, macro-scale deformation, and microstructure variations of 3D LTL preforms during the forming process.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Energy & Fuels

The physical and mechanical properties for flexible biomass particles using computer vision

Jie Su et al.

Summary: This study investigates the physical properties and mechanical performances of biomass particles through static and dynamic image measurement methods. The obtained data can be used as operating parameters for numerical simulations.

FUEL (2022)

Add to Collection

Article Materials Science, Composites

Modeling of 3D woven fibre structures by numerical simulation of the weaving process

Zhi Yang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Mechanics

Structure monitoring and deformation analysis of tunnel structure

Hao Yang et al.

Summary: This paper discusses monitoring tunnel structures through visual perception technology, introduces an algorithm for deformation monitoring with laser-based technology to enhance the reliability of structural health monitoring, and uses photogrammetry technology to clearly identify the dimensions of diseases.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Manufacturing

Characterising the variability in wrinkling during the preforming of non-crimp fabrics

J. V. Viisainen et al.

Summary: This study analyzes the variability in the wrinkling behavior of a biaxial non-crimp fabric under different conditions during hemispherical preforming and develops a method to quantify the variability in wrinkle amplitude and location. The results indicate that fabric architecture and forming layup significantly influence wrinkle amplitude and location variability, with location variability being more sensitive to changes in the forming process.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Review Mechanics

A review of multi-scale numerical modeling of three-dimensional woven fabric

Ziyue Gao et al.

Summary: Three-dimensional woven composites are widely used due to their high impact and delamination resistance, great design ability, and ease of processing. The mechanical properties are closely linked to fabric structure, which can be analyzed through numerical models, but the multi-scale nature and complex weave structure pose challenges in modeling. Various numerical models aim to simulate real fabric structure and properties, with recent progress in modeling methods at the mesoscale and microscale highlighted in literature surveys.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Computer Science, Information Systems

Precision Fibre Angle Inspection for Carbon Fibre Composite Structures Using Polarisation Vision

Gary A. Atkinson et al.

Summary: This paper evaluates the precision of polarisation imaging technology for the inspection of carbon fibre composite components, showing sub-degree accuracy can be obtained in ideal conditions. The precision varies depending on illumination, lens choice and material type, with limited application for non-planar regions in three-dimensional component inspection.

ELECTRONICS (2021)

Add to Collection

Article Automation & Control Systems

Intelligent crack extraction based on terrestrial laser scanning measurement

Hao Yang et al.

MEASUREMENT & CONTROL (2020)

Add to Collection

Article Engineering, Manufacturing

An exploration of the deformability behaviours dominated by braiding angle during the forming of the triaxial carbon fibre braids

Shenglei Xiao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Chemistry, Physical

Process-Induced Distortions Characterization of MBWK Fabric Reinforced Composite Helmet Shell

He Xiang et al.

MATERIALS (2020)

Add to Collection

Article Mechanics

Effect of weaving structures on the geometry variations and mechanical properties of 3D LTL woven composites

Wei Jiao et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Influence of the tufting pattern on the formability of tufted multi-layered preforms

Hao Shen et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Non-destructive testing for carbon-fiber-reinforced plastic (CFRP) using a novel eddy current probe

Dehui Wu et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Manufacturing

Characterisation and optimisation of wrinkling during the forming of tufted three-dimensional composite preforms

Hao Shen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Mechanics

A feature extraction method for deformation analysis of large-scale composite structures based on TLS measurement

Xiangyang Xu et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Manufacturing

Ply-orientation measurements in composites using structure-tensor analysis of volumetric ultrasonic data

L. J. Nelson et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Chemistry, Analytical

Structured-Light Based 3D Reconstruction System for Cultural Relic Packaging

Limei Song et al.

SENSORS (2018)

Add to Collection

Article Optics

Full-view three-dimensional measurement of complex surfaces

Limei Song et al.

OPTICAL ENGINEERING (2018)

Add to Collection

Article Optics

Fast 3D reconstruction of dental cast model based on structured light

Song Li-mei et al.

OPTOELECTRONICS LETTERS (2018)

Add to Collection

Review Materials Science, Textiles

Biaxial weft-knitted fabrics as composite reinforcements: A review

Hossein Hasani et al.

JOURNAL OF INDUSTRIAL TEXTILES (2017)

Add to Collection

Article Engineering, Manufacturing

Kinematic modelling of 3D woven fabric deformation for structural scale features

Bassam El Said et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Add to Collection

Review Engineering, Manufacturing

Nondestructive evaluation of thick-section composites and sandwich structures: A review

M. E. Ibrahim

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Add to Collection

Article Engineering, Manufacturing

Quantifying variability within glass fibre reinforcements using an automated optical method

J. M. Gan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

Add to Collection

Article Engineering, Manufacturing

Sheet forming of the multi-layered biaxial weft knitted fabric reinforcement. Part I: On hemispherical surfaces

Xiong-Kui Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.