Related references
Note: Only part of the references are listed.Process optimization and in-mold sensing enabled dimensional prediction for high precision injection molding
Ye Li et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2022)
Determination of process parameters based on cavity pressure characteristics to enhance quality uniformity in injection molding
Jian-Yu Chen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Prediction and validation of the specific volume for inline warpage control in injection molding
Christian Hopmann et al.
POLYMER TESTING (2021)
Effect of mold compliance on dimensional variations of precision molded components in multi-cavity injection molding
Rasoul Mahshid et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Optimization of injection-molding processing conditions for plastic double-convex Fresnel lens using grey-based Taguchi method
Chao-Ming Lin et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2020)
Optimization of Injection-Molding Process Parameters for Weight Control: Converting Optimization Problem to Classification Problem
Peng Zhao et al.
ADVANCES IN POLYMER TECHNOLOGY (2020)
Intelligent Injection Molding on Sensing, Optimization, and Control
Peng Zhao et al.
ADVANCES IN POLYMER TECHNOLOGY (2020)
Artificial neural network-based online defect detection system with in-mold temperature and pressure sensors for high precision injection molding
Joseph C. Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Functional Analysis Validation of Micro and Conventional Injection Molding Machines Performances Based on Process Precision and Accuracy for Micro Manufacturing
Matteo Calaon et al.
MICROMACHINES (2020)
Grey optimization of injection molding processing of plastic optical lens based on joint consideration of aberration and birefringence effects
Chao-Ming Lin et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2019)
Improvement of the replication quality of randomly micro-textured injection-moulding components using a multi-scale surface analysis
Pablo Gamonal-Repiso et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Correlating nano-scale surface replication accuracy and cavity temperature in micro-injection moulding using in-line process control and high-speed thermal imaging
Federico Baruffi et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Generation of narrowband Lamb waves based on the Michelson interference technique
Tian-Ming Ye et al.
CHINESE PHYSICS B (2018)
Micro-structured optical fiber sensor for simultaneous measurement of temperature and refractive index
Ying-gang Liu et al.
OPTICAL FIBER TECHNOLOGY (2018)
Highly sensitive liquid level sensor based on an optical fiber Michelson interferometer with core-offset structure
Pengfei Li et al.
OPTIK (2018)
Phase derivative thermo-spatiogram for distributed temperature sensing based on chirped grating-Michelson Interferometer
Daryl Tan et al.
SENSORS AND ACTUATORS A-PHYSICAL (2018)
Warpage reduction through optimized process parameters and annealed process of injection-molded plastic parts
Supattarachai Sudsawat et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
Analysis of Shrinkages in ABS Injection Molding Parts for Automobile Applications
J. Sreedharan et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Multi Response optimization of injection moulding Process parameters to reduce cycle time and warpage
Gurjeet Singh et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Monitoring and dynamic control of quality stability for injection molding process
Xundao Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Multiobjective Optimization of Injection Molding Process Parameters for the Precision Manufacturing of Plastic Optical Lens
Junhui Liu et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2017)
Replicating capability investigation of micro features in injection moulding process
Rossella Surace et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Replication of micro and nano-features on iPP by injection molding with fast cavity surface temperature evolution
Vito Speranza et al.
MATERIALS & DESIGN (2017)
Analysis of the shrinkage of injection-molded fiber-reinforced thin-wall parts
Davide Masato et al.
MATERIALS & DESIGN (2017)
Micro-nanostructured polymer surfaces using injection molding: A review
K. Maghsoudi et al.
MATERIALS TODAY COMMUNICATIONS (2017)
Numerical investigation of warpage in insert injection-molded lightweight hybrid products
Trieu Khoa Nguyen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)
An Innovative Surrogate-Based Searching Method for Reducing Warpage and Cycle Time in Injection Molding
Jian Zhao et al.
ADVANCES IN POLYMER TECHNOLOGY (2016)
Precision injection molding of freeform optics
Fengzhou Fang et al.
ADVANCED OPTICAL TECHNOLOGIES (2016)
Micro injection moulding process parameter tuning
Michael Packianather et al.
9TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '14 (2015)
Multiobjective optimization of injection molding parameters based on soft computing and variable complexity method
Jin Cheng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the Taguchi method
Eghbal Hakimian et al.
MATERIALS & DESIGN (2012)
On the relationship between cooling setup and warpage in injection molding
R. Sanchez et al.
MEASUREMENT (2012)
Interference of Light in a Michelson-Morley Interferometer: A Quantum Optical Approach
O. Langangen et al.
INTERNATIONAL JOURNAL OF OPTICS (2012)
Effect of Packing Pressure on Refractive Index Variation in Injection Molding of Precision Plastic Optical Lens
Can Yang et al.
ADVANCES IN POLYMER TECHNOLOGY (2011)
Warpage phenomenon of thin-wall injection molding
Yuh-Chyun Chiang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Replication Characterization of Microribs Fabricated by Combining Ultraprecision Machining and Microinjection Molding
Can Yang et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Numerical simulation of residual stress and birefringence in the precision injection molding of plastic microlens arrays
Can Weng et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2009)
A study of the effects of process parameters for injection molding on surface quality of optical lenses
Kuo-Ming Tsai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Comparison of height replication properties of micro-injection moulding and micro-injection compression moulding for production of microstructures on lightguiding plates
Y. K. Shen
PLASTICS RUBBER AND COMPOSITES (2007)
The optimal process conditions of an injection-molded thermoplastic part with a thin shell feature using grey-fuzzy logic: A case study on machining the PC/ABS cell phone shell
Ko-Ta Chiang
MATERIALS & DESIGN (2007)
Application of grey-fuzzy logic on the optimal process design of an injection-molded part with a thin shell feature
KT Chiang et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2006)
An X-ray BBB Michelson interferometer
JP Sutter et al.
JOURNAL OF SYNCHROTRON RADIATION (2004)
Optimization of the micro-injection molding process using grey relational analysis and MoldFlow analysis
YK Shen et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)
White-light spectral interferometry with the uncompensated Michelson interferometer and the group refractive index dispersion in fused silica
P Hlubina
OPTICS COMMUNICATIONS (2001)
Share Paper
