Related references
Note: Only part of the references are listed.Hierarchical hybrid nanostructure of 1T-tungsten disulfide quantum dots/multihollow capillary bundle-type mesoporous carbon for ultrafast and ultrastable lithium storage
Dong-Yo Shin et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Designing Biobased Recyclable Polymers for Plastics
Rajni Hatti-Kaul et al.
TRENDS IN BIOTECHNOLOGY (2020)
Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses
Tianyun Yao et al.
COMPOSITES PART B-ENGINEERING (2020)
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Jinhua Li et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2020)
Hydrogel-Based Bioinks for 3D Bioprinting in Tissue Regeneration
Previn Ramiah et al.
FRONTIERS IN MATERIALS (2020)
Printability, Mechanical and Thermal Properties of Poly(3-Hydroxybutyrate)-Poly(Lactic Acid)-Plasticizer Blends for Three-Dimensional (3D) Printing
Sona Kontarova et al.
MATERIALS (2020)
Mechanical Degradation of 3D Printed PLA in Simulated Marine Environment
Ram Krishna Upadhyay et al.
SURFACES AND INTERFACES (2020)
3D printing of PLA composites scaffolds reinforced with keratin and chitosan: Effect of geometry and structure
L. E. Rojas-Martinez et al.
EUROPEAN POLYMER JOURNAL (2020)
Recycling possibilities of bioplastics based on PLA/PHB blends
Roderik Plavec et al.
POLYMER TESTING (2020)
3D printing goes greener: Study of the properties of post-consumer recycled polymers for the manufacturing of engineering components
Ana C. Pinho et al.
WASTE MANAGEMENT (2020)
Recycled poly(lactic acid)-based 3D printed sustainable biocomposites: a comparative study with injection molding
E. O. Cisneros-Lopez et al.
MATERIALS TODAY SUSTAINABILITY (2020)
3D printable biomaterials for orthopedic implants: Solution for sustainable and circular economy
Dinesh Yadav et al.
RESOURCES POLICY (2020)
Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling
Carola Esposito Corcione et al.
CERAMICS INTERNATIONAL (2019)
Monitoring an Analysis of Perturbations in Fusion Deposition Modelling (FDM) Processes for the Use of Biomaterials
Fernando Blaya Haro et al.
JOURNAL OF MEDICAL SYSTEMS (2019)
Additive manufacturing of self-healing elastomers
Kunhao Yu et al.
NPG ASIA MATERIALS (2019)
Mechanical recycling of poly(lactic acid): Evaluation of a chain extender and a peroxide as additives for upgrading the recycled plastic
Freddys R. Beltran et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Modulating Bioglass Concentration in 3D Printed Poly(propylene fumarate) Scaffolds for Post-Printing Functionalization with Bioactive Functional Groups
Alex P. Kleinfehn et al.
BIOMACROMOLECULES (2019)
On the entanglement-based mechanism in thermal degradation of vinyl polymers
Takashi Sawaguchi et al.
POLYMER DEGRADATION AND STABILITY (2019)
Study of the Influence of the Reprocessing Cycles on the Final Properties of Polylactide Pieces Obtained by Injection Molding
Angel Aguero et al.
POLYMERS (2019)
Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly(lactic acid) filaments into 3D printed materials?
Sisi Wang et al.
PLASTICS RUBBER AND COMPOSITES (2018)
Urethane-based low-temperature curing, highly-customized and multifunctional poly(glycerol sebacate)-co-poly(ethylene glycol) copolymers
Zihao Wang et al.
ACTA BIOMATERIALIA (2018)
Effect of simulated mechanical recycling processes on the structure and properties of poly(lactic acid)
F. R. Beltran et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)
Printability of co-polyester using fused deposition modelling and related mechanical performance
Khaoula Abouzaid et al.
EUROPEAN POLYMER JOURNAL (2018)
Development of PLA-PHB-based biodegradable active packaging and its application to salmon
Yichao Ma et al.
PACKAGING TECHNOLOGY AND SCIENCE (2018)
Three-dimensional printing of PLA and PLA/PHA dumbbell-shaped specimens of crisscross and transverse patterns as promising materials in emerging application areas: Prediction study
Jennifer Gonzalez Ausejo et al.
POLYMER DEGRADATION AND STABILITY (2018)
Effect of Selected Commercial Plasticizers on Mechanical, Thermal, and Morphological Properties of Poly(3-hydroxybutyrate)/Poly(lactic acid)/Plasticizer Biodegradable Blends for Three-Dimensional (3D) Print
Premysl Mencik et al.
MATERIALS (2018)
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Udayabhanu Jammalamadaka et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)
Effects of Diisocyanate and Polymeric Epoxidized Chain Extenders on the Properties of Recycled Poly(Lactic Acid)
Basak Tuna et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)
Biocompatible 3D printed polymers via fused deposition modelling direct C2C12 cellular phenotype in vitro
Rowan P. Rimington et al.
LAB ON A CHIP (2017)
Emerging bone tissue engineering via Polyhydroxyalkanoate (PHA)-based scaffolds
Janice Lim et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Reprocessability of PHB in extrusion: ATR-FTIR, tensile tests and thermal studies
Leonardo Fabio Rivas et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2017)
3D printing of tunable shape memory polymer blends
Siyuan Chen et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
In-vitro evaluation of Polylactic acid (PLA) manufactured by fused deposition modeling
Matthias C. Wurm et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters
Razieh Hashemi Sanatgar et al.
APPLIED SURFACE SCIENCE (2017)
Engineering thermoplastics for additive manufacturing: a critical perspective with experimental evidence to support functional applications
Gianluca Cicala et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2017)
PEGylated poly(glycerol sebacate)-modified calcium phosphate scaffolds with desirable mechanical behavior and enhanced osteogenic capacity
Yifan Ma et al.
ACTA BIOMATERIALIA (2016)
Carboxymethyl cellulose enables silk fibroin nanofibrous scaffold with enhanced biomimetic potential for bone tissue engineering application
B. N. Singh et al.
CARBOHYDRATE POLYMERS (2016)
Three-dimensional printing of biological matters
Ahmed Munaz et al.
JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2016)
Bionanocomposite films based on plasticized PLA-PHB/cellulose nanocrystal blends
M. P. Arrieta et al.
CARBOHYDRATE POLYMERS (2015)
Blending of Polyhydroxybutyrate-co-valerate with Polylactic Acid for Packaging Applications - Reflections on Miscibility and Effects on the Mechanical and Barrier Properties
V. Jost et al.
CHEMICAL AND BIOCHEMICAL ENGINEERING QUARTERLY (2015)
Bio-based PLA_PHB plasticized blend films: Processing and structural characterization
Ilaria Armentano et al.
LWT-FOOD SCIENCE AND TECHNOLOGY (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
A global sustainability perspective on 3D printing technologies
Malte Gebler et al.
ENERGY POLICY (2014)
Ternary PLA-PHB-Limonene blends intended for biodegradable food packaging applications
Marina P. Arrieta et al.
EUROPEAN POLYMER JOURNAL (2014)
Combined Effect of Poly(hydroxybutyrate) and Plasticizers on Polylactic acid Properties for Film Intended for Food Packaging
Marina P. Arrieta et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2014)
Influence of melt processing conditions on poly(lactic acid) degradation: Molar mass distribution and crystallization
Pierre Erwan Le Marec et al.
POLYMER DEGRADATION AND STABILITY (2014)
Comparison of Different Processing Methods to Prepare Poly(lactid acid)-Hydrotalcite Composites
R. Scaffaro et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Compatibilization in bio-based and biodegradable polymer blends
B. Imre et al.
EUROPEAN POLYMER JOURNAL (2013)
Recycling of bioplastics, their blends and biocomposites: A review
Azadeh Soroudi et al.
EUROPEAN POLYMER JOURNAL (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Recycling of waste from polymer materials: An overview of the recent works
Kotiba Hamad et al.
POLYMER DEGRADATION AND STABILITY (2013)
Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance
J. D. Badia et al.
POLYMER DEGRADATION AND STABILITY (2012)
Thermal, mechanical and morphological characterization of plasticized PLA-PHB blends
Mohamed A. Abdelwahab et al.
POLYMER DEGRADATION AND STABILITY (2012)
Blending Polylactic Acid with Polyhydroxybutyrate: The Effect on Thermal, Mechanical, and Biodegradation Properties
Min Zhang et al.
ADVANCES IN POLYMER TECHNOLOGY (2011)
Bioplastic Wastes: The Best Final Disposition for Energy Saving
V. Piemonte
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2011)
Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective
David Lazarevic et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
Plastics recycling: challenges and opportunities
Jefferson Hopewell et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Characterisation of multi-extruded poly(lactic acid)
Marian Zenkiewicz et al.
POLYMER TESTING (2009)
Recycling and recovery routes of plastic solid waste (PSW): A review
S. M. Al-Salem et al.
WASTE MANAGEMENT (2009)
Trabecular scaffolds created using micro CT guided fused deposition modeling
B. C. Tellis et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2008)
Mechanical, thermal and degradation properties of poly(d,l-lactide)/poly(hydroxybutyrate-co-hydroxyvalerate)/poly(ethylene glycol) blend
Shuai Wang et al.
POLYMER DEGRADATION AND STABILITY (2008)
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
Isabelle Pillin et al.
POLYMER DEGRADATION AND STABILITY (2008)
Effects of compatibilizers and electron radiation on thermomechanical properties of composites consisting of five recycled polymers
Marian Zenkiewicz et al.
POLYMER TESTING (2008)
Quantitative analysis for polymer degradation in the extrusion process
H Kometani et al.
INTERNATIONAL POLYMER PROCESSING (2006)
The application of polyhydroxyalkanoates as tissue engineering materials
GQ Chen et al.
BIOMATERIALS (2005)
Life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes
F Perugini et al.
ENVIRONMENTAL PROGRESS (2005)
Life cycle assessment of a plastic packaging recycling system
U Arena et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2003)
Biopolymers: overview of several properties and consequences on their applications
K Van de Velde et al.
POLYMER TESTING (2002)
Miscibility and solid-state structures for blends of poly[(S)-lactide] with atactic poly[(R,S)-3-hydroxybutyrate]
I Ohkoshi et al.
POLYMER (2000)
Share Paper
