4.7 Article

Simulation and Modelling of Hydrogen Production from Waste Plastics: Technoeconomic Analysis

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

A Review on the Conversion of Synthetic Gas to LPG over Hybrid Nanostructure Zeolites Catalysts

Ali. A. Al-Qadri et al.

Summary: Liquified petroleum gas (LPG) is widely used due to its high heating value and clean combustibility. The synthesis of LPG from syngas can be achieved through direct, indirect, or semi-direct methods. Factors affecting the process performance include reaction temperature and pressure. The catalyst, particularly the type of zeolite used, plays a crucial role in the process.

CHEMISTRYSELECT (2022)

Review Engineering, Environmental

A review of metal-organic frameworks/graphitic carbon nitride composites for solar-driven green H2 production, CO2 reduction, and water purification

Muhammad Usman et al.

Summary: Population growth and economic development have led to an increase in the consumption of fossil fuel energy resources, resulting in serious environmental implications. Photocatalysis plays a crucial role in sustainable energy development and environmental remediation. Graphitic carbon nitride (g-C3N4) and metal-organic frameworks (MOFs) composites have significant importance in green energy production and environmental pollution control.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Article Thermodynamics

Techno-economic analysis of dual methanol and hydrogen production using energy mix systems with CO2 capture

Usama Ahmed

Summary: The study aims to develop alternative models for dual production of methanol and H-2 using Aspen Plus, with a focus on controlling greenhouse gas emissions. Comparison between the base case and alternative case shows that the alternative model offers higher process efficiency, lower energy requirements, reduced fuel production costs, lower CO2 emissions, and better project feasibility.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Energy & Fuels

Production of Hydrogen from Low Rank Coal Using Process Integration Framework between Syngas Production Processes: Techno-Economic Analysis

Usama Ahmed et al.

Summary: Two process models have been developed for producing syngas and hydrogen from coal and natural gas, with the integrated gasifier and reforming model created to increase H-2 output and reduce total carbon footprints.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Article Chemistry, Multidisciplinary

Producing hydrocarbon fuel from the plastic waste: Techno-economic analysis

Hamad Almohamadi et al.

Summary: The techno-economic and feasibility assessment of producing fuel from plastic waste through pyrolysis was conducted, showing the mass and energy yields of the process. Economic estimation calculated the capital investment, production cost, and minimum selling price of the fuel, with sensitivity analysis revealing the factors affecting the minimum selling price.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2021)

Article Polymer Science

Decarbonising the Portland and other Cements-Via Simultaneous Feedstock Recycling and Carbon Conversions Sans External Catalysts

Sheila Devasahayam

Summary: This study focused on reducing carbon footprint in cement production by utilizing waste plastics and biowastes as reactants, converting them into clean energy. By adding waste plastics and biowastes during the calcination process of limestone and magnesium oxide, carbon dioxide and methane emissions were significantly reduced and converted into syngas or hydrogen.

POLYMERS (2021)

Article Engineering, Environmental

An investigation into the pyrolysis and oxidation of bio-oil from sugarcane bagasse: Kinetics and evolved gases using TGA-FTIR

Javier Ordonez-Loza et al.

Summary: By conducting a TGA-FTIR analysis of sugarcane bagasse bio-oil, this study investigated its characteristics during pyrolysis and combustion processes, revealing three distinct stages of oxidation and analyzing the kinetic parameters. The study found that the intensity of CO2 FTIR peaks during bio-oil combustion was 10 times higher than that during pyrolysis, shedding new light on the thermal degradation/oxidation characteristics of sugarcane bagasse bio-oil.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Review Engineering, Environmental

CO2 towards fuels: A review of catalytic conversion of carbon dioxide to hydrocarbons

Mustapha D. Garba et al.

Summary: Meeting the ever-increasing global energy demands is a serious challenge of the 21st century, with one solution being the conversion of CO2 into hydrocarbon fuels. Utilizing heterogeneous catalysis with zeolite and non-zeolite based catalysts, as well as noble and transition metals, can lead to the production of high value-added HC fuels from CO2. This review article emphasizes the importance of research and technological advancements in this area for both industries and academia.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

H2 production from co-pyrolysis/gasification of waste plastics and biomass under novel catalyst Ni-CaO-C

Yue Chai et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Zhitong Yao et al.

WASTE MANAGEMENT & RESEARCH (2020)

Article Energy & Fuels

Gasification of plastic waste for synthesis gas production

Dang Saebea et al.

ENERGY REPORTS (2020)

Article Chemistry, Physical

Single-Step Conversion of H2-Deficient Syngas into High Yield of Tetramethylbenzene

Muhammad Tahir Arslan et al.

ACS CATALYSIS (2019)

Article Energy & Fuels

Hydrogen production from co-gasification of asphaltene and plastic

Nima Emad et al.

PETROLEUM SCIENCE AND TECHNOLOGY (2019)

Article Green & Sustainable Science & Technology

Catalytic actions of MgCO3/MgO system for efficient carbon reforming processes

Sheila Devasahayam

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2019)

Review Green & Sustainable Science & Technology

Review: Opportunities for simultaneous energy/materials conversion of carbon dioxide and plastics in metallurgical processes

Sheila Devasahayam

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2019)

Article Energy & Fuels

A solar methane reforming reactor design with enhanced efficiency

Jian Jin et al.

APPLIED ENERGY (2018)

Article Green & Sustainable Science & Technology

Thermal decomposition of magnesium carbonate with biomass and plastic wastes for simultaneous production of hydrogen and carbon avoidance

Sheila Devasahayam et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Review Green & Sustainable Science & Technology

Biomass gasification in fluidized beds: A review of biomass moisture content and operating pressure effects

Ingrid Lopes Motta et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

Recent advances in the gasification of waste plastics. A critical overview

Gartzen Lopez et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Chemistry, Analytical

Heavy fuel oil pyrolysis and combustion: Kinetics and evolved gases investigated by TGA-FTIR

Abdul Gani Abdul Jameel et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)

Article Engineering, Multidisciplinary

Recycling of plastic solid waste: A state of art review and future applications

Narinder Singh et al.

COMPOSITES PART B-ENGINEERING (2017)

Article Chemistry, Analytical

Pyrolysis and in-line catalytic steam reforming of polystyrene through a two-step reaction system

Itsaso Barbarias et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2016)

Review Energy & Fuels

A critical review on biomass gasification, co-gasification, and their environmental assessments

Somayeh Farzad et al.

BIOFUEL RESEARCH JOURNAL-BRJ (2016)

Article Energy & Fuels

Fluidized-Bed Gasification of Plastic Waste, Wood, and Their Blends with Coal

Lucio Zaccariello et al.

ENERGIES (2015)

Article Multidisciplinary Sciences

Plastic waste inputs from land into the ocean

Jenna R. Jambeck et al.

SCIENCE (2015)

Article Engineering, Chemical

Cogasification of Polyethylene and Lignite in a Dual Fluidized Bed Gasifier

Stefan J. Kern et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

Article Chemistry, Physical

Hydrogen production by steam gasification of polypropylene with various nickel catalysts

Chunfei Wu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2009)

Review Biology

Plastics, the environment and human health: current consensus and future trends

Richard C. Thompson et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)

Article Thermodynamics

Air gasification of polypropylene plastic waste in fluidized bed gasifier

Rui Xiao et al.

ENERGY CONVERSION AND MANAGEMENT (2007)