☆ 4.7 Article

Mechanical and Tribological Behavior of Functionally Graded Unidirectional Glass Fiber-Reinforced Epoxy Composites

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Textiles

Flexural behavior of functionally graded polymeric composite beams

M. Atta et al.

Summary: The bending test of functionally graded polymeric composite materials is investigated both experimentally and numerically, showing that the gradient pattern and V-f% of the outer layers are critical for improving flexural behavior. Delamination failure between layers plays a major role in the rapidity of final failure.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Add to Collection

Review Engineering, Multidisciplinary

Recent advances in tribological behavior of functionally graded composites: A review

R. Jojith et al.

Summary: This article reviews the tribological performance of functionally graded composites (FGCs) under abrasive and reciprocating test conditions, based on numerous studies conducted over the past three decades. The findings reveal that FGCs exhibit different wear analysis trends under varying process conditions and parameters. A framework is presented for identifying the process parameters and evaluating wear performance through wear modes and mechanisms. Optimizing the process parameters independently can reduce material loss in the tribo-system, catering to specific engineering applications in accordance with industrial demands. Additionally, the challenges encountered during wear analysis are discussed, and their prospects in various scientific and technological fields are addressed.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2022)

Add to Collection

Article Engineering, Chemical

Effects of composite patching on cyclic crack tip deformation of cracked pinned metallic joints

A. A. Abd-Elhady et al.

Summary: This study demonstrates that using CFRP composite patches can effectively increase the stiffness of cracked pinned joints, as well as significantly reduce J-integral and crack tip plastic zones.

JOURNAL OF ADHESION (2021)

Add to Collection

Article Chemistry, Physical

Small punch testing of heat resistant ultrafine-grained Al composites stabilized by nano-metric Al2O3 (HITEMAL (c)) in a broad temperature range

Peter Krizik et al.

Summary: The mechanical properties of thermally stable ultrafine-grained Al metal matrix composites dispersion strengthened and stabilized by nano-metric in-situ Al2O3 were tested by small punch testing (SPT) across a range of temperatures. The microstructural features of the materials had a significant impact on their mechanical properties and the correlation between SPT and conventional tensile testing results varied with testing temperature. Fracture mechanisms were found to change from ductile to brittle behavior as testing temperature increased.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Engineering, Civil

Investigation on integrity assessment tests of WRB metal-polymer-metal composites

Saeed Mousa et al.

Summary: The study investigated the effects of manufacturing parameters, interface properties, and layer thicknesses on the strength and integrity of Al-PU-Al composites fabricated using warm roll bonding technique. Experimental and numerical results revealed that there is a critical diameter of unbonded circle that significantly affects the interlayer bonding strength. The mechanical behavior of the composites from small punch test is marginally influenced by the interfacial bonding strength.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanics of the small punch test: a review and qualification of additive manufacturing materials

Jonathan Torres et al.

Summary: The Small Punch Test (SPT) was developed for evaluating materials in situations where the source material is scarce, lacking standardization, yet verified using traditional testing methods. Various methods exist to equate SPT results with conventional stress-strain data, but weaknesses such as fracture and fatigue approaches exist. Further research is focused on evaluating the suitability of SPT for additively manufactured (AM) materials and developing correlation equations between SPT results and conventional testing data for expediting material studies and optimization.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Composites

Tribological Characterization of Carbon Nanotube/Aluminum Functionally Graded Materials Fabricated by Centrifugal Slurry Methods

Hideaki Tsukamoto

Summary: In this study, CNT/aluminum matrix functionally graded materials were fabricated using centrifugal slurry methods. The study showed that proper dispersibility of CNT contributed to an increase in coefficients of friction and enhancement of wear resistances in the fabricated materials.

JOURNAL OF COMPOSITES SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative Study between Small Punch Tests and Finite Element Analysis of Miniature Steel Specimens

Zhaoyi Cheng et al.

Summary: The small punch test method using miniature specimens has great potential for material research in extreme environments, providing a new way to establish mechanical properties and obtain accurate data from miniature specimens. Through SPT experiments, FEM analyses, and scanning electron microscopy observations, a method for deriving mechanical properties from standard tensile test samples has been established.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Polymer Science

An Assessment of ASTM E1922 for Measuring the Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials

Islam El-Sagheer et al.

Summary: The study aims to predict the fracture toughness of fiber-reinforced polymer by proposing matrix cracked specimens to address the limitations of existing standards. Results show significant differences in fracture behavior and toughness between different cracked specimens, with the fracture toughness of matrix cracked specimens with two layers being 1.3 times higher than that of specimens with one layer.

POLYMERS (2021)

Add to Collection

Article Engineering, Civil

Tribological and Mechanical Properties of Epoxy Reinforced by Hybrid Nanoparticles

W. H. Alhazmi et al.

Summary: The addition of nano-Al2O3 or SiC nanoparticles improves the wear resistance of epoxy, but reduces its tensile strength and modulus of elasticity. However, synergistic effect was not observed in the present study.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hybrid effect of functionally graded hybrid composites of glass-carbon fibers

Shamsher Bahadur Singh et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Materials Science, Ceramics

Process development for additive manufacturing of functionally graded alumina toughened zirconia components intended for medical implant application

Eric Schwarzer et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Phase field modelling of crack propagation in functionally graded materials

Hirshikesh et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Depressants in nanoemulsion systems applied to quartz and hematite microflotation

Paula Romyne de Morais Cavalcante Neitzke et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical and wear behavior of AA7075 aluminum matrix composites reinforced by Al2O3 nanoparticles

Huda A. Al-Salihi et al.

NANOCOMPOSITES (2019)

Add to Collection

Article Materials Science, Composites

Mechanical and thermo-mechanical peculiarity of functionally graded materials-based glass fiber-filled polybutylene terephthalate composites

Akant K. Singh et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)

Add to Collection

Article Engineering, Civil

Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines

A. A. Abd-Elhady et al.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Civil

Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines

A. A. Abd-Elhady et al.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Chemical

Flexural Fatigue Performance of Glass Fiber/Epoxy Step-Wise Functionally and Non-Functionally Graded Composites of Different Structures

A. I. Selmy et al.

INTERNATIONAL POLYMER PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of mechanical properties and three-body abrasive wear of functionally graded aluminum LM25/titanium carbide metal matrix composite

N. Radhika et al.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2017)

Add to Collection

Proceedings Paper Construction & Building Technology

Failure Analysis of Composite Repaired Pipelines with an Inclined Crack under Static Internal Pressure

Amr A. Abd-Elhady et al.

2ND INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY, ICSI 2017 (2017)

Add to Collection

Article Engineering, Multidisciplinary

Application of small punch testing on the mechanical and microstructural characterizations of P91 steel at room temperature

M. F. Moreno

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2016)

Add to Collection

Article Chemistry, Physical

An analysis of mechanical properties and optimization of EDM process parameters of Al 4032 alloy reinforced with Zrb2 and Tib2 in-situ composites

N. V. Rengasamy et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Processing and Characterization of Functionally Graded Aluminum (A319)-SiCp Metallic Composites by Centrifugal Casting Technique

E. Jayakumar et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties

N. Radhika et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Dry sliding wear studies on SiC reinforced functionally graded aluminium matrix composites

K. Vinoth Babu et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Functionally graded materials: A review of fabrication and properties

Minoo Naebe et al.

APPLIED MATERIALS TODAY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling and experimental evaluation of functional failure pressures in glass fiber reinforced polyester pipes

Roham Rafiee et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Add to Collection

Article Engineering, Industrial

Fabrication of copper/diamond functionally graded materials for grinding wheels by centrifugal sintered-casting

Takahiro Kunimine et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

Add to Collection

Review Mechanics

A critical review of recent research on functionally graded plates

D. K. Jha et al.

COMPOSITE STRUCTURES (2013)

Add to Collection

Article Materials Science, Composites

Mechanical and wear behavior of vinyl ester-carbon/cement by-pass dust particulate filled homogeneous and their functionally graded composites

Brijesh Gangil et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Investigations on mechanical and sliding wear behaviour of short fibre-reinforced vinylester-based homogenous and their functionally graded composites

Brijesh Gangil et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2012)

Add to Collection

Article Engineering, Multidisciplinary

Comparative analysis of steady state heat transfer in a TBC and functionally graded air cooled gas turbine blade

Nilanjan Coomar et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2010)

Add to Collection

Article Engineering, Civil

Three-dimensional finite elements of steel bolted connections

SH Ju et al.

ENGINEERING STRUCTURES (2004)

Add to Collection

Article Materials Science, Composites

The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites

MZ Rong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.