Related references
Note: Only part of the references are listed.Predicting the compressive strength of green concretes using Harris hawks optimization-based data-driven methods
Emadaldin Mohammadi Golafshani et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Mechanical properties and uniaxial compressive stress-strain behavior of fully recycled aggregate concrete
Yuxiang Tang et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Direct Shear Strength Prediction for Precast Concrete Joints Using the Machine Learning Method
Tongxu Liu et al.
JOURNAL OF BRIDGE ENGINEERING (2022)
Artificial neural network model to predict the compressive strength of eco-friendly geopolymer concrete incorporating silica fume and natural zeolite
Amir Ali Shahmansouri et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Integration of support vector regression and grey wolf optimization for estimating the ultimate bearing capacity in concrete-filled steel tube columns
Ngoc-Tri Ngo et al.
NEURAL COMPUTING & APPLICATIONS (2021)
On the Use of Machine Learning Models for Prediction of Compressive Strength of Concrete: Influence of Dimensionality Reduction on the Model Performance
Zhi Wan et al.
MATERIALS (2021)
Life cycle carbon cost of buildings under carbon trading and carbon tax system in China
Wei Luo et al.
SUSTAINABLE CITIES AND SOCIETY (2021)
Modeling and Sensitivity Analysis of Concrete Creep with Machine Learning Methods
Kai Li et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)
Compound utilization of construction and industrial waste as cementitious recycled powder in mortar
Chang Sun et al.
RESOURCES CONSERVATION AND RECYCLING (2021)
Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer
Emadaldin Mohammadi Golafshani et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Siliceous fly ash and blast furnace slag based geopolymer concrete under ambient temperature curing condition
Sourav K. Das et al.
STRUCTURAL CONCRETE (2020)
Optimizing mix proportion of recycled aggregate concrete by readjusting the aggregate gradation
Zhenhua Duan et al.
STRUCTURAL CONCRETE (2020)
Carbon emission analyses of concretes made with recycled materials considering CO2 uptake through carbonation absorption
Jianzhuang Xiao et al.
STRUCTURAL CONCRETE (2020)
Estimation of the compressive strength of concretes containing ground granulated blast furnace slag using hybridized multi-objective ANN and salp swarm algorithm
Amirreza Kandiri et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Assessment of compressive strength of Ultra-high Performance Concrete using deep machine learning techniques
Omar R. Abuodeh et al.
APPLIED SOFT COMPUTING (2020)
Effects of different silica fume dosages on early-age behavior and cracking resistance of high strength concrete under restrained condition
Dejian Shen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Multi-Scale Investigation on Concrete Prepared with Recycled Aggregates from Different Parent Concrete
Zhenhua Duan et al.
JOURNAL OF RENEWABLE MATERIALS (2020)
Intelligent mixture design of steel fibre reinforced concrete using a support vector regression and firefly algorithm based multi-objective optimization model
Yimiao Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Behavior assessment, regression analysis and support vector machine (SVM) modeling of waste tire rubberized concrete
Mostafa Jalal et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Enhancing evacuation response to extreme weather disasters using public transportation systems: a novel simheuristic approach
Maziar Yazdani et al.
JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2020)
An artificial neural network approach for under-reamed piles subjected to uplift forces in dry sand
Hossein Moayedi et al.
NEURAL COMPUTING & APPLICATIONS (2019)
The engineering performance of concrete containing high volume of ground granulated blast furnace slag and pulverized fly ash with polycarboxylate-based superplasticizer
Chee Ban Cheah et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Artificial Intelligence Approaches for Prediction of Compressive Strength of Geopolymer Concrete
Dong Van Dao et al.
MATERIALS (2019)
Parametric sensitivity analysis and modelling of mechanical properties of normal- and high-strength recycled aggregate concrete using grey theory, multiple nonlinear regression and artificial neural networks
Jinjun Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Capacity planning and reconfiguration for disaster-resilient health infrastructure
Amir Hossein Aghapour et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Impact of silica fume, fly ash, and metakaolin on the thickness and strength of the ITZ in concrete
V. Nezerka et al.
CEMENT & CONCRETE COMPOSITES (2019)
A comparison of machine learning methods for predicting the compressive strength of field-placed concrete
M. A. DeRousseau et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A modified firefly algorithm-artificial neural network expert system for predicting compressive and tensile strength of high-performance concrete
Dac-Khuong Bui et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of fly ash and silica fume on transition zone, pore structure and permeability of concrete
Ali Sadrmomtazi et al.
MAGAZINE OF CONCRETE RESEARCH (2018)
Shear resistance prediction of concrete beams reinforced by FRP bars using artificial neural networks
H. Naderpour et al.
MEASUREMENT (2018)
Variable selection and prediction of uniaxial compressive strength and modulus of elasticity by random forest
S. S. Matin et al.
APPLIED SOFT COMPUTING (2018)
Predicting the compressive strength of silica fume concrete using hybrid artificial neural network with multi-objective grey wolves
Ali Behnood et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Using Neural Networks to Determine the Significance of Aggregate Characteristics Affecting the Mechanical Properties of Recycled Aggregate Concrete
Zhenhua Duan et al.
APPLIED SCIENCES-BASEL (2018)
Compressive strength prediction of environmentally friendly concrete using artificial neural networks
Hosein Naderpour et al.
JOURNAL OF BUILDING ENGINEERING (2018)
Comparative analysis on hidden neurons estimation in multi layer perceptron neural networks for wind speed forecasting
M. Madhiarasan et al.
ARTIFICIAL INTELLIGENCE REVIEW (2017)
Global sensitivity analysis of lateral-torsional buckling resistance based on finite element simulations
Zdenek Kala et al.
ENGINEERING STRUCTURES (2017)
A review on fly ash characteristics - Towards promoting high volume utilization in developing sustainable concrete
T. Hemalatha et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Performance of sustainable concretes containing very high volume Class-F fly ash and ground granulated blast furnace slag
Aliakbar Gholampour et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Prediction of the compressive strength of normal and high-performance concretes using M5P model tree algorithm
Ali Behnood et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
A RSM-Based Multi-Response Optimization Application for Determining Optimal Mix Proportions of Standard Ready-Mixed Concrete
Baris Simsek et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2016)
Prediction and modeling of mechanical properties in fiber reinforced self-compacting concrete using particle swarm optimization algorithm and artificial neural network
Hadi Mashhadban et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test
Xinhua Cai et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
Erdogan Ozbay et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Portland slag and composites cement concretes: engineering and durability properties
Sevket Can Bostanci et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Mechanical Properties of Energy Efficient Concretes Made with Binary, Ternary, and Quaternary Cementitious Blends of Fly Ash, Blast Furnace Slag, and Silica Fume
Jeong-Eun Kim et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2016)
Predicting modulus elasticity of recycled aggregate concrete using M5′ model tree algorithm
Ali Behnood et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Modeling slump of ready mix concrete using genetic algorithms assisted training of Artificial Neural Networks
Vinay Chandwani et al.
EXPERT SYSTEMS WITH APPLICATIONS (2015)
Prediction of Fresh and Hardened State Properties of UHPC: Comparative Study of Statistical Mixture Design and an Artificial Neural Network Model
Ehsan Ghafari et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)
Let a biogeography-based optimizer train your Multi-Layer Perceptron
Seyedali Mirjalili et al.
INFORMATION SCIENCES (2014)
On the approximation by neural networks with bounded number of neurons in hidden layers
Vugar E. Ismailov
JOURNAL OF MATHEMATICAL ANALYSIS AND APPLICATIONS (2014)
Equitability, mutual information, and the maximal information coefficient
Justin B. Kinney et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Durability and mechanical properties of high strength concrete incorporating ultra fine Ground Granulated Blast-furnace Slag
Susanto Teng et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Prediction of compressive strength of recycled aggregate concrete using artificial neural networks
Z. H. Duan et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Prediction of compressive strength of concrete containing construction and demolition waste using artificial neural networks
Adriana Trocoli Abdon Dantas et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Global strategies and potentials to curb CO2 emissions in cement industry
Emad Benhelal et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Finite element modelling of concrete-filled steel stub columns under axial compression
Zhong Tao et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)
Prediction of the effect of varying cure conditions and w/c ratio on the compressive strength of concrete using artificial neural networks
Hasbi Yaprak et al.
NEURAL COMPUTING & APPLICATIONS (2013)
Prediction of the strength of mineral admixture concrete using multivariable regression analysis and an artificial neural network
U. Atici
EXPERT SYSTEMS WITH APPLICATIONS (2011)
Detecting Novel Associations in Large Data Sets
David N. Reshef et al.
SCIENCE (2011)
Effect of GGBFS on time dependent compressive strength of concrete
Mohd Shariq et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Prediction of elastic modulus of normal and high strength concrete by support vector machine
Kezhen Yan et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Predicting the compressive strength of ground granulated blast furnace slag concrete using artificial neural network
Cahit Bilim et al.
ADVANCES IN ENGINEERING SOFTWARE (2009)
Comparison of artificial neural network and fuzzy logic models for prediction of long-term compressive strength of silica fume concrete
Fatih Oezcan et al.
ADVANCES IN ENGINEERING SOFTWARE (2009)
Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume
Mehmet Gesoglu et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate
M. L. Berndt
CONSTRUCTION AND BUILDING MATERIALS (2009)
GUI-HDMR - A software tool for global sensitivity analysis of complex models
T. Ziehn et al.
ENVIRONMENTAL MODELLING & SOFTWARE (2009)
Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28 days
S. E. Chidiac et al.
CEMENT & CONCRETE COMPOSITES (2008)
Effect of curing conditions on the mortars with and without GGBFS
O. Cakir et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag
Cengiz Duran Atis et al.
BUILDING AND ENVIRONMENT (2007)
An experimental study on optimum usage of GGBS for the compressive strength of concrete
A. Oner et al.
CEMENT & CONCRETE COMPOSITES (2007)
Autogenous shrinkage of concrete containing granulated blast-furnace slag
K. M. Lee et al.
CEMENT AND CONCRETE RESEARCH (2006)
A tutorial on support vector regression
AJ Smola et al.
STATISTICS AND COMPUTING (2004)
A selective sampling approach to active feature selection
H Liu et al.
ARTIFICIAL INTELLIGENCE (2004)
The use of GA-ANNs in the modelling of compressive strength of cement mortar
S Akkurt et al.
CEMENT AND CONCRETE RESEARCH (2003)
Properties of concrete incorporating fly ash and ground granulated blast-furnace slag
GY Li et al.
CEMENT & CONCRETE COMPOSITES (2003)
Influence of different curing conditions on the physical and mechanical properties of concretes with admixtures of silica fume and blast furnace slag
I Turkmen
MATERIALS LETTERS (2003)