Related references
Note: Only part of the references are listed.In situ detection of welding defects: a review
Anirudh Sampath Madhvacharyula et al.
WELDING IN THE WORLD (2022)
Effect of contaminations on the acoustic emissions during wire and arc additive manufacturing of 316L stainless steel
Andre Ramalho et al.
ADDITIVE MANUFACTURING (2022)
Automatic defects detection and classification of low carbon steel WAAM products using improved remanence/magneto-optical imaging and cost-sensitive convolutional neural network
Xiang He et al.
MEASUREMENT (2021)
Automatic Quantification of Subsurface Defects by Analyzing Laser Ultrasonic Signals Using Convolutional Neural Networks and Wavelet Transform
Shifeng Guo et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2021)
Deep learning for defect characterization in composite laminates inspected by step-heating thermography
Roberto Marani et al.
OPTICS AND LASERS IN ENGINEERING (2021)
Laser Ultrasonic inspection of a Wire plus Arc Additive Manufactured (WAAM) sample with artificial defects
Yan Zeng et al.
ULTRASONICS (2021)
Applications of Machine Learning in Process Monitoring and Controls of L-PBF Additive Manufacturing: A Review
Dalia Mahmoud et al.
APPLIED SCIENCES-BASEL (2021)
Towards defect monitoring for metallic additive manufacturing components using phased array ultrasonic testing
A. Chabot et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2020)
Finite element simulation of laser-generated surface acoustic wave for identification of subsurface defects
Wei Zeng et al.
OPTIK (2020)
Laser opto-ultrasonic dual detection for simultaneous compositional, structural, and stress analyses for wire plus arc additive manufacturing
Yuyang Ma et al.
ADDITIVE MANUFACTURING (2020)
Supervised deep learning for real-time quality monitoring of laser welding with X-ray radiographic guidance
Sergey Shevchik et al.
SCIENTIFIC REPORTS (2020)
Laser induced breakdown spectroscopy methods and applications: A comprehensive review
Syed Kifayat Hussain Shah et al.
RADIATION PHYSICS AND CHEMISTRY (2020)
Simultaneous Compositional and Grain Size Measurements Using Laser Opto-Ultrasonic Dual Detection for Additive Manufacturing
Yuyang Ma et al.
MATERIALS (2020)
Development and Application of Infrared Thermography Non-Destructive Testing Techniques
Zhi Qu et al.
SENSORS (2020)
Thermographic Inspection of Internal Defects in Steel Structures: Analysis of Signal Processing Techniques in Pulsed Thermography
Yoonjae Chung et al.
SENSORS (2020)
A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control
F. Honarvar et al.
ULTRASONICS (2020)
Effect of crack-like defects on the fracture behaviour of Wire plus Arc Additively Manufactured nickel-base Alloy 718
Cui E. Seow et al.
ADDITIVE MANUFACTURING (2020)
Evaluation of thermal losses for welded structures
A. Elkihel et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Understanding internal defects in Mo fabricated by wire arc additive manufacturing through 3D computed tomography
Jiachen Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
In Situ Additive Manufacturing Process Monitoring With an Acoustic Technique: Clustering Performance Evaluation Using K-Means Algorithm
Hossein Taheri et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Signal processing approach on weld data for evaluation of arc welding electrodes using probability density distributions
Vikas Kumar et al.
MEASUREMENT (2019)
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Tiago A. Rodrigues et al.
MATERIALS (2019)
Wire and Arc Additive Manufacturing of Aluminum Components
Markus Koehler et al.
METALS (2019)
Phased Array Ultrasonic Inspection of Metal Additive Manufacturing Parts
Ana Beatriz Lopez et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2019)
Study on the acoustic emission effect of plasma plume in pulsed laser welding
Yi Luo et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Non-destructive testing for wire plus arc additive manufacturing of aluminium parts
Joao B. Bento et al.
ADDITIVE MANUFACTURING (2019)
Ultrasonic phased array inspection of a Wire plus Arc Additive Manufactured (WAAM) sample with intentionally embedded defects
Yashar Javadi et al.
ADDITIVE MANUFACTURING (2019)
Real-time monitoring of welding process using air-coupled ultrasonics and acoustic emission
Lu Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Automated defect detection for Fluorescent Penetrant Inspection using Random Forest
N. J. Shipway et al.
NDT & E INTERNATIONAL (2019)
Spectral diagnosis of wire arc additive manufacturing of Al alloys
Chen Zhang et al.
ADDITIVE MANUFACTURING (2019)
In situ multi-elemental analysis by laser induced breakdown spectroscopy in additive manufacturing
Vasily N. Lednev et al.
ADDITIVE MANUFACTURING (2019)
In situ laser-induced breakdown spectroscopy measurements of chemical compositions in stainless steels during tungsten inert gas welding
Ugur Alp Taparli et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2018)
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
Bintao Wu et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Defect Detection in Additively Manufactured Components: Laser Ultrasound and Laser Thermography Comparison
Donatella Cerniglia et al.
AIAS2017 - 46TH CONFERENCE ON STRESS ANALYSIS AND MECHANICAL ENGINEERING DESIGN (2018)
Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing
Ana Lopez et al.
ADDITIVE MANUFACTURING (2018)
Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography
Dongqing Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Monitoring the quality of welding based on welding current and ste analysis
Afidatusshimah Mazlan et al.
4TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER2017) (2017)
Acoustic emission method for defect detection and identification in carbon steel welded joints
Mohamad G. Droubi et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)
Wire plus Arc Additive Manufacturing
S. W. Williams et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Analysis of arc welding process using Digital Storage Oscilloscope
Vikas Kumar et al.
MEASUREMENT (2016)
Inspection of thick welded joints using laser-ultrasonic SAFT
D. Levesque et al.
ULTRASONICS (2016)
Inspection of Additive Manufactured Parts Using Laser Ultrasonics
D. Levesque et al.
42ND ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: INCORPORATING THE 6TH EUROPEAN-AMERICAN WORKSHOP ON RELIABILITY OF NDE (2016)
Experimental and numerical study of the excitability of zero group velocity Lamb waves by laser-ultrasound
Clemens M. Gruensteidl et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2015)
A review of the application of acoustic emission technique in engineering
S. Gholizadeh et al.
STRUCTURAL ENGINEERING AND MECHANICS (2015)
Analysis and correction of defects within parts fabricated using powder bed fusion technology
Jorge Mireles et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2015)
Review of Non-destructive Testing (NDT) Techniques and their applicability to thick walled composites
M. R. Jolly et al.
PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON THROUGH-LIFE ENGINEERING SERVICES (2015)
Study on Monitoring of Plasma Emission Signal in Lap Welding of Zn Coated Steel Sheet Using CO2 Laser
Chang-Je Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Detection, 3-D positioning, and sizing of small pore defects using digital radiography and tracking
Erik Lindgren
EURASIP JOURNAL ON ADVANCES IN SIGNAL PROCESSING (2014)
Eddy current step heating thermography for quantitatively evaluation
Yunze He et al.
APPLIED PHYSICS LETTERS (2013)
Surface crack detection in welds using thermography
Patrik Broberg
NDT & E INTERNATIONAL (2013)
Numerical modeling of thermoelastic generation of ultrasound by laser irradiation in the coupled thermoelasticity
Istvan A. Veres et al.
ULTRASONICS (2013)
Automatic defect identification using thermal image analysis for online weld quality monitoring
U. Sreedhar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Progress in NDT of resistance spot welding of aluminium using ultrasonic C-scan
M. Thornton et al.
NDT & E INTERNATIONAL (2012)
Development of Optophone with No Diaphragmand Application to Sound Measurement in Jet Flow
Yoshito Sonoda et al.
ADVANCES IN ACOUSTICS AND VIBRATION (2012)
The Study on Defects of 6-Inch Cylinder by Electro Magnetic Acoustic Transducer (EMAT)
M. K. Chang et al.
ADVANCED SCIENCE LETTERS (2011)
Electrical conductivity field analysis for evaluation of FSW joints in AA6013 and AA7075 alloys
T. G. Santos et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
The sources of heat generation in vibrothermography
Jeremy Renshaw et al.
NDT & E INTERNATIONAL (2011)
Numerical modeling of thermoelastic laser-generation of ultrasonic waves
Istvan A. Veres et al.
2011 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS) (2011)
A Real-Time Spectroscopic Sensor for Monitoring Laser Welding Processes
Teresa Sibillano et al.
SENSORS (2009)
Laser ultrasonic diagnostics of residual stress
Alexander Karabutov et al.
ULTRASONICS (2008)
Emission spectrometry evaluation in arc welding monitoring system
Sadek C. A. Alfaro et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Pulsed thermography: philosophy, qualitative and quantitative analysis on certain aircraft applications
N. P. Avdelidis et al.
INSIGHT (2006)
Feasibility study of acoustic signals for on-line monitoring in short circuit gas metal arc welding
L Grad et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Performance of laser-ultrasonic F-SAFT imaging
D Lévesque et al.
ULTRASONICS (2002)