Related references
Note: Only part of the references are listed.Strength Properties of Structural Glulam Manufactured from Pine (Pinus sylvestris L.) Side Boards
Radoslaw Mirski et al.
MATERIALS (2021)
Experimental and analytical investigation on fire resistance of glulam-concrete composite beams
Hao Du et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Pine Logs Sorting as a Function of Bark Thickness
Radoslaw Mirski et al.
FORESTS (2021)
Elastic Moduli of Butt-end Logs and the Variable Knots Distribution in Scots Pine from Western Poland
Radoslaw Mirski et al.
BIORESOURCES (2021)
Increasing Damping of Thin-Walled Structures Using Additively Manufactured Vibration Eliminators
Pawel Dunaj et al.
MATERIALS (2020)
Axial compression of steel-timber composite column consisting of H-shaped steel and glulam
Qibin Hu et al.
ENGINEERING STRUCTURES (2020)
Strength grading of hardwoods using transversal ultrasound
A. Kovryga et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)
The influence of veneer thickness and knot proportion on the mechanical properties of laminated veneer lumber (LVL) made from secondary quality hardwood
Citra Yanto Ciki Purba et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2019)
Electric resistance tomography and stress wave tomography for decay detection in trees-a comparison study
Xiaoquan Yue et al.
PEERJ (2019)
A 3D model for knots and related fiber deviations in sawn timber for prediction of mechanical properties of boards
Markus Lukacevic et al.
MATERIALS & DESIGN (2019)
Quantifying knots by image analysis and modeling their effects on the mechanical properties of loblolly pine lumber
Stephen Wright et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2019)
Analysis of Economic Feasibility of Ash and Maple Lamella Production for Glued Laminated Timber
Philipp Schlotzhauer et al.
FORESTS (2019)
Crack Propagation and Fracture Process Zone (FPZ) of Wood in the Longitudinal Direction Determined Using Digital Image Correlation (DIC) Technique
Ying Yu et al.
REMOTE SENSING (2019)
Quantification of cracks and cross-section weakening in sliced veneers
Beate Buchelt et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2018)
Robust optimization for volume variation in timber processing
Wei Wang et al.
JOURNAL OF FORESTRY RESEARCH (2018)
Comparison of three systems for automatic grain angle determination on European hardwood for construction use
Philipp Schlotzhauer et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2018)
Quantitative image analysis of acoustic tomography in woods
Jorge Renato Andrade Strobel et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2018)
Probability models that relate nondestructive test methods to lumber design values of plantation loblolly pine
Joseph Dahlen et al.
FORESTRY (2018)
Performance of strength grading methods based on fibre orientation and axial resonance frequency applied to Norway spruce (Picea abies L.), Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) and European oak (Quercus petraea (Matt.) Liebl./Quercus robur L.)
Anders Olsson et al.
ANNALS OF FOREST SCIENCE (2018)
Image Reconstruction of Internal Defects in Wood Based on Segmented Propagation Rays of Stress Waves
Xiaochen Du et al.
APPLIED SCIENCES-BASEL (2018)
Surface Characteristics of Scots Pine Veneers Produced with a Peeling Process in Industrial Conditions
Agnieszka Laskowska et al.
BIORESOURCES (2018)
Strength grading on the basis of high resolution laser scanning and dynamic excitation: a full scale investigation of performance
Anders Olsson et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2017)
An experimental study on crack propagation at rock-concrete interface using digital image correlation technique
Wei Dong et al.
ENGINEERING FRACTURE MECHANICS (2017)
Strength grading of sawn timber in Europe: an explanation for engineers and researchers
Dan Ridley-Ellis et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2016)
Three-dimensional modelling of knots and pith location in Norway spruce boards using tracheid-effect scanning
Andreas Briggert et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2016)
DIFFERENCES IN DYNAMIC MODULUS OF ELASTICITY DETERMINED BY THREE VIBRATION METHODS AND THEIR RELATIONSHIP WITH STATIC MODULUS OF ELASTICITY
Shakti Chauhan et al.
MADERAS-CIENCIA Y TECNOLOGIA (2016)
Tree Growth and Climate Relationship: Dynamics of Scots Pine (Pinus Sylvestris L.) Growing in the Near-Source Region of the Combined Heat and Power Plant During the Development of the Pro-Ecological Strategy in Poland
Barbara Sensula et al.
WATER AIR AND SOIL POLLUTION (2015)
Discussion of common and new indicating properties for the strength grading of wooden boards
Markus Lukacevic et al.
WOOD SCIENCE AND TECHNOLOGY (2015)
Modelling knot morphology as a function of external tree and branch attributes
E. Duchateau et al.
CANADIAN JOURNAL OF FOREST RESEARCH (2013)
Automated knot detection for high speed computed tomography on Pinus sylvestris L. and Picea abies (L.) Karst. using ellipse fitting in concentric surfaces
Erik Johansson et al.
COMPUTERS AND ELECTRONICS IN AGRICULTURE (2013)
Effects of grading procedures on the scatter of characteristic values of European grown sawn timber
Peter Stapel et al.
MATERIALS AND STRUCTURES (2013)
Automatic computation of the knot area ratio for machine strength grading of Douglas-fir and Spruce timber
Guillaume Roblot et al.
European Journal of Environmental and Civil Engineering (2012)
The influence of wood density on longitudinal wave velocity determined by the ultrasound method in comparison to the resonance longitudinal method
Jan Baar et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2012)
Influence of moisture content of wood on sound velocity and dynamic MOE of natural frequency- and ultrasonic runtime measurement
Helene Unterwieser et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2011)
Development of an Optimal Three-Dimensional Visualization System for Rough Lumber Edging and Trimming in Central Appalachia
Wenshu Lin et al.
FOREST PRODUCTS JOURNAL (2011)
Using non-destructive testing to assess modulus of elasticity of Pinus sylvestris trees
Hakan Lindstrom et al.
SCANDINAVIAN JOURNAL OF FOREST RESEARCH (2009)
Material behaviour of veneer during multidimensional moulding
A Wagenführ et al.
HOLZ ALS ROH-UND WERKSTOFF (2006)
Influence of knot area ratio on the bending strength of Canadian Douglas fir timber used in Japanese post and beam housing
F Lam et al.
JOURNAL OF WOOD SCIENCE (2005)
Estimating the influence of knots on the local longitudinal stiffness in radiata pine structural timber
P Xu
WOOD SCIENCE AND TECHNOLOGY (2002)