4.6 Article

Radiation-Induced Sharpening in Cr-Coated Zirconium Alloy

Related references

Note: Only part of the references are listed.
Review Chemistry, Physical

Review on chromium coated zirconium alloy accident tolerant fuel cladding

Jianqiao Yang et al.

Summary: This paper reviews the oxidation, diffusion, and mechanical properties of Cr-coated Zr alloys in normal operation conditions and accident conditions of nuclear reactors, analyzes the factors that cause coating failure, and proposes questions that need to be clarified and further studied.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Materials Science, Multidisciplinary

High temperature Cr-Zr interaction of two types of Cr-coated Zr alloys in inert gas environment

Jianqiao Yang et al.

Summary: This study investigated the Cr-Zr interaction of two types of Cr coated Zr alloy ATF claddings deposited by cold spraying and magnetron sputtering at temperatures ranging from 1100 to 1300 degrees C. It was found that the interlayer growth rate of cold sprayed samples was slightly higher than that of magnetron sputtered samples, and the temperature-dependent consumption coefficient of the Cr coating was calculated.

JOURNAL OF NUCLEAR MATERIALS (2021)

Article Materials Science, Coatings & Films

Effect of low-dose Xe20+ ion irradiation on the deformation behavior of the magnetron sputtered Cr coatings under nanoindentation

Renda Wang et al.

Summary: The Cr coatings deposited by magnetron sputtering on zirconium alloy substrates were irradiated by 5 MeV Xe20+ ions, leading to surface particle refining and hardening effects. The microstructure of the coatings remained intact after irradiation, exhibiting increased hardness and decreased indentation modulus. However, micro-cracks were observed near the indentation zones on the irradiated coatings, indicating some structural changes caused by the radiation.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Solubility and vacancy-mediated inter-diffusion in the Zr-Nb-Cr system

Vidur Tuli et al.

Summary: Through density functional theory calculations, it was found that in BCC-Cr and BCC-Nb, Nb and Zr diffuse faster than Cr, while Cr diffuses slower than Nb and Zr. The segregation of solutes towards vacancy sinks varies at different temperatures.

JOURNAL OF NUCLEAR MATERIALS (2021)

Review Materials Science, Multidisciplinary

Recent Advances in Protective Coatings for Accident Tolerant Zr-Based Fuel Claddings

Egor Kashkarov et al.

Summary: This review highlights the latest research on protective coatings for ATF claddings based on Zr alloys, focusing on their behavior under normal and accident conditions in LWRs. Recent developments in barrier coatings and structure designs for suppressing mutual diffusion are introduced.

COATINGS (2021)

Article Materials Science, Multidisciplinary

Irradiation resistance of chromium coatings for ATFC in the temperature range 300?550?C

A. S. Kuprin et al.

Summary: Chromium coatings show promise in protecting zirconium alloys from high temperature oxidation within the accident tolerant fuel cladding (ATFC) concept. However, under irradiation conditions, growth in grain size and increased swelling were observed, highlighting the effects of heavy ion irradiation on the structure of the coatings.

JOURNAL OF NUCLEAR MATERIALS (2021)

Article Materials Science, Coatings & Films

Formation of voids in the Cr coatings with (110)-preferred orientation prepared by arc ion plating under an Au+ irradiation of 20 dpa

Wenjuan Gong et al.

Summary: This study investigates the formation of voids in Cr coatings produced by arc ion plating under Au+ ion irradiation. The size and number of voids are found to be influenced by the (110)-oriented crystallinity, with void size decreasing and void number increasing as the crystallinity increases. Moreover, the voids in different coatings exhibit different depth profiles. The presence of voids impacts dislocation motion, resulting in radiation hardening and disordering in coatings with low (110)-oriented crystallinities but not in those with high (110)-oriented crystallinities, due to the small size of voids.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Early studies on Cr-Coated Zircaloy-4 as enhanced accident tolerant nuclear fuel claddings for light water reactors

Jean-Christophe Brachet et al.

JOURNAL OF NUCLEAR MATERIALS (2019)

Article Instruments & Instrumentation

Investigating radiation damage in nuclear energy materials using JANNuS multiple ion beams

A. Gentils et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2019)

Article Materials Science, Multidisciplinary

Effects of ion irradiation on chromium coatings of various thicknesses on a zirconium alloy

Li Jiang et al.

JOURNAL OF NUCLEAR MATERIALS (2019)

Article Materials Science, Multidisciplinary

Thermal shock resistance of TiN-, Cr-, and TiN/Cr-coated zirconium alloy

Weiwei Xiao et al.

JOURNAL OF NUCLEAR MATERIALS (2019)

Article Nuclear Science & Technology

Quick calculation of damage for ion irradiation: implementation in Iradina and comparisons to SRIM

Jean-Paul Crocombette et al.

EPJ NUCLEAR SCIENCES & TECHNOLOGIES (2019)

Review Materials Science, Multidisciplinary

Atomic-scale interface structure of a Cr-coated Zircaloy-4 material

J. Ribis et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Review Materials Science, Multidisciplinary

HRTEM and chemical study of an ion-irradiated chromium/zircaloy-4 interface

A. Wu et al.

JOURNAL OF NUCLEAR MATERIALS (2018)

Review Materials Science, Multidisciplinary

Accident tolerant fuel cladding development: Promise, status, and challenges

Kurt A. Terrani

JOURNAL OF NUCLEAR MATERIALS (2018)

Article Nuclear Science & Technology

AREVA NP's enhanced accident-tolerant fuel developments: Focus on Cr-coated M5 cladding

Jeremy Bischoff et al.

NUCLEAR ENGINEERING AND TECHNOLOGY (2018)

Article Materials Science, Multidisciplinary

Adhesion property and high-temperature oxidation behavior of Cr-coated Zircaloy-4 cladding tube prepared by 3D laser coating

Hyun-Gil Kim et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Article Materials Science, Multidisciplinary

Interface sharpening and broadening during annealing of Cu/Ni multilayers: A kinetic Monte Carlo study

JM Roussel et al.

PHYSICAL REVIEW B (2006)

Article Multidisciplinary Sciences

Transient interface sharpening in miscible alloys

Z Erdélyi et al.

SCIENCE (2004)

Article Materials Science, Multidisciplinary

Stress effects on diffusional interface sharpening in ideal binary alloys -: art. no. 092102

Z Erdélyi et al.

PHYSICAL REVIEW B (2003)

Article Physics, Multidisciplinary

Interface sharpening instead of broadening by diffusion in ideal binary alloys -: art. no. 165901

Z Erdélyi et al.

PHYSICAL REVIEW LETTERS (2002)

Article Materials Science, Multidisciplinary

Defect structures in ZrCo2 Laves phase

JH Zhu et al.

ACTA MATERIALIA (2000)