Related references
Note: Only part of the references are listed.Effect of Work-Hardening Mechanisms in Asymmetrically Cyclic-Loaded Austenitic Stainless Steels on Low-Cycle and High-Cycle Fatigue Behavior
Masoud Moshtaghi et al.
STEEL RESEARCH INTERNATIONAL (2021)
A MGI-oriented investigation of the Young's modulus and its application to the development of a novel Ti-Nb-Zr-Cr bio-alloy
Jinfeng Ling et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Graphene-coated Ti-Nb-Ta-Mn foams: A promising approach towards a suitable biomaterial for bone replacement
Sheila Lascano et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Surface Modifications of Biodegradable Metallic Foams for Medical Applications
Renata Orinakova et al.
COATINGS (2020)
Micro-arc oxidation coating on porous magnesium foam and its potential biomedical applications
J. M. Rua et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Influence of Porosity on the Elastic Modulus of Ti-Zr-Ta-Nb Foams with a Low Nb Content
Claudio Aguilar et al.
METALS (2019)
Formation and Properties of Biomedical Ti-Ta Foams Prepared from Nanoprecursors by Thermal Dealloying Process
Grzegorz Adamek et al.
MATERIALS (2019)
A novel approach to fabricate Zn coating on Mg foam through a modified thermal evaporation technique
Xinfu Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Deformation mechanism and mechanical properties of a thermomechanically processed beta Ti-28Nb-35.4Zr alloy
Sertan Ozan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
An In Vitro Corrosion Study of Open Cell Iron Structures with PEG Coating for Bone Replacement Applications
Lucia Haverova et al.
METALS (2018)
Surface Modification of Ti-Nb-Zr Foams by Poly(3-Hydroxybutyrate)
Vadim A. Sheremetyev et al.
SHAPE MEMORY ALLOYS, SMA 2018 (2018)
Tantalum foams prepared by the thermal dealloying process
Grzegorz Adamek
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Solid solution and amorphous phase in Ti-Nb-Ta-Mn systems synthesized by mechanical alloying
C. Aguilar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Silver nanoparticles: A new view on mechanistic aspects on antimicrobial activity
Nelson Duran et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2016)
Controlling the degradation kinetics of porous iron by poly(lactic-co-glycolic acid) infiltration for use as temporary medical implants
Abdul Hakim Md Yusop et al.
SCIENTIFIC REPORTS (2015)
Phase composition, microstructure, and mechanical properties of porous Ti-Nb-Zr alloys prepared by a two-step foaming powder metallurgy method
X. Rao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
New Developments of Ti-Based Alloys for Biomedical Applications
Yuhua Li et al.
MATERIALS (2014)
Deformation-induced ω phase in modified Ti-29Nb-13Ta-4.6Zr alloy by Cr addition
Qiang Li et al.
ACTA BIOMATERIALIA (2013)
A construction of novel iron-foam-based calcium phosphate/chitosan coating biodegradable scaffold material
Zhaohui Wen et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Influence of equiatomic Zr/Nb substitution on superelastic behavior of Ti-Nb-Zr alloy
Jinyong Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of ternary alloying elements on microstructure and superelastictity of Ti-Nb alloys
D. C. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Mechanisms of Silver Nanoparticle Release, Transformation and Toxicity: A Critical Review of Current Knowledge and Recommendations for Future Studies and Applications
Bogumila Reidy et al.
MATERIALS (2013)
Development of new metallic alloys for biomedical applications
Mitsuo Niinomi et al.
ACTA BIOMATERIALIA (2012)
Recent advances in bone tissue engineering scaffolds
Susmita Bose et al.
TRENDS IN BIOTECHNOLOGY (2012)
The Effect of Structural Design on Mechanical Properties and Cellular Response of Additive Manufactured Titanium Scaffolds
Jan Wieding et al.
MATERIALS (2012)
Biological actions of silver nanoparticles embedded in titanium controlled by micro-galvanic effects
Huiliang Cao et al.
BIOMATERIALS (2011)
Bulk and porous metastable beta Ti-Nb-Zr(Ta) alloys for biomedical applications
V. Brailovski et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Compression temperature and binder ratio on a process for fabrication of open-celled porous Ti
Il-Ho Kim et al.
MATERIALS RESEARCH BULLETIN (2010)
Phase stability change with Zr content in β-type Ti-Nb alloys
Mohamed Abdel-Hady et al.
SCRIPTA MATERIALIA (2007)
Improvement in corrosion resistance of NiTi by anodization in acetic acid
P. Shi et al.
MATERIALS LETTERS (2007)
General approach to phase stability and elastic properties of beta-type Ti-alloys using electronic parameters
Mohamed Abdel-Hady et al.
SCRIPTA MATERIALIA (2006)
Morphological characterization and in vitro biocompatibility of a porous nickel-titanium alloy
O Prymak et al.
BIOMATERIALS (2005)
Development of low rigidity β-type titanium alloy for biomedical applications
M Niinomi et al.
MATERIALS TRANSACTIONS (2002)
Processing of biocompatible porous Ti and Mg
CE Wen et al.
SCRIPTA MATERIALIA (2001)