4.8 Review

Efficient and Stable FA-Rich Perovskite Photovoltaics: From Material Properties to Device Optimization

Related references

Note: Only part of the references are listed.
Article Multidisciplinary Sciences

Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells

Fei Zhang et al.

Summary: The performance of 3D perovskite solar cells can be improved by treating the surface with 2D layered perovskites that have efficient charge transport. Adjusting the arrangement of organic molecules enhances hole transport and power conversion efficiency. The use of a stable 2D surface layer also improves the performance and stability of 3D perovskite solar cells.

SCIENCE (2022)

Article Multidisciplinary Sciences

A universal co-solvent dilution strategy enables facile and cost-effective fabrication of perovskite photovoltaics

Hong Zhang et al.

Summary: This article introduces an eco-friendly and cost-effective strategy for fabricating high-efficiency perovskite solar cells, which involves diluting perovskite precursors with a high volatility co-solvent to reduce toxic waste and material cost. The strategy is universally successful across different perovskite compositions, potentially facilitating the translation of perovskite technologies from lab to fab.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Multidisciplinary

High Efficiency Perovskite Solar Cells Exceeding 22% via a Photo-Assisted Two-Step Sequential Deposition

Dong Geon Lee et al.

Summary: The study introduces an efficient method to produce tri-iodide ion in a precursor solution using a photoassisted process for application in high-performance perovskite solar cells. Results show that this method can facilitate the formation of fine perovskite films with high crystallinity, large grain size, and low trap density, leading to a 22% improvement in device performance. This approach offers an alternative strategy to fabricate highly efficient PSCs with significantly reduced processing times.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Roles of MACl in Sequentially Deposited Bromine-Free Perovskite Absorbers for Efficient Solar Cells

Feihong Ye et al.

Summary: This study systematically investigated the role of MACl in sequentially deposited Br-free FA-based perovskites, revealing that MACl can regulate the reaction, phase transition, and crystallization. Compared to traditional FAPbI(3), perovskites with MACl exhibit superior performance in terms of grain size, carrier lifetime, and trap density.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells

Jun Peng et al.

Summary: This research introduces a nanopatterned electron transport layer that overcomes the trade-off between passivation quality and series resistance in traditional polymer passivation layers. Combining the nanopatterned electron transport layer with a dopant-free hole transport layer improves the efficiency and stability of perovskite solar cells.

SCIENCE (2021)

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

Dual Additive for Simultaneous Improvement of Photovoltaic Performance and Stability of Perovskite Solar Cell

In Seok Yang et al.

Summary: Additive engineering is an efficient approach for improving photovoltaic performance and phase stability of formamidinium-based perovskite, with a dual additive strategy of mixing MACl and CsCl proving successful in enhancing open-circuit voltage Voc, reducing trap density, and increasing resistance against charge recombination. The best power conversion efficiency achieved with the dual additive is 23.22%, outperforming single additive strategies using MACl or CsCl.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Article Multidisciplinary Sciences

Reconfiguring the band-edge states of photovoltaic perovskites by conjugated organic cations

Jingjing Xue et al.

Summary: The electronic properties of metal-halide perovskites are mainly influenced by the structural and compositional variations in the inorganic B-X framework, while A-site cations primarily stabilize the lattice. The incorporation of pi-conjugated pyrene-containing A-site cations has been shown to extend electronic states, influencing surface band edges and improving carrier dynamics and power conversion efficiencies in perovskites.

SCIENCE (2021)

Article Multidisciplinary Sciences

Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness

Qingshun Dong et al.

Summary: This study introduces a new approach by incorporating an interpenetrating structure at the electron-transporting-layer interface in perovskite solar cells, enhancing their operational stability and mechanical robustness.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

In Situ Surface Fluorination of TiO2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet-Light Stability

Wanpei Hu et al.

Summary: By in situ fluorination, TiO2 nanocrystals can increase electron mobility, decrease trap state density, and inhibit photocatalytic activity; utilizing fluorinated TiO2 as ETL enables high efficiency and stability of perovskite solar cells.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Ambient-air fabrication of stable mixed cation perovskite planar solar cells with efficiencies exceeding 22% using a synergistic mixed antisolvent with complementary properties

Kyungeun Jung et al.

Summary: This study proposed an innovative mixed antisolvent approach for the synthesis of FA-based planar PSCs under ambient-air conditions, achieving high efficiency and environmental adaptability.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

An Embedding 2D/3D Heterostructure Enables High-Performance FA-Alloyed Flexible Perovskite Solar Cells with Efficiency over 20%

Zhen Wang et al.

Summary: A study on the fabrication of flexible FA-alloyed perovskite solar cells using solvent engineering and embedding 2D/3D perovskite heterostructures strategy has achieved high efficiency and improved mechanical robustness.

ADVANCED SCIENCE (2021)

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Article Multidisciplinary Sciences

Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability

Zhenghong Dai et al.

Summary: The use of iodine-terminated self-assembled monolayer (I-SAM) in perovskite solar cells (PSCs) leads to increased adhesion toughness at the interface, improved power conversion efficiency, reduced hysteresis, and enhanced operational stability. This is attributed to a decrease in hydroxyl groups at the interface and higher interfacial toughness achieved with I-SAM treatment.

SCIENCE (2021)

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Article Energy & Fuels

Stabilization of formamidinium lead triiodide α-phase with isopropylammonium chloride for perovskite solar cells

Byung-wook Park et al.

Summary: The study shows that using isopropylammonium to stabilize the perovskite structure greatly improves the long-term stability of solar cells, leading to enhanced efficiency performance.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

2D/3D perovskite engineering eliminates interfacial recombination losses in hybrid perovskite solar cells

Albertus A. Sutanto et al.

Summary: The study emphasizes the importance of interface engineering and design in optimizing multilayer device stacks, particularly in addressing interface issues in 2D/3D perovskite solar cells. It proposes methods to enhance device efficiency and stability by understanding the interface energetics and forming a p-n junction.
Review Chemistry, Physical

3D/2D passivation as a secret to success for polycrystalline thin-film solar cells

Deborah L. McGott et al.

Summary: Polycrystalline photovoltaic materials offer low costs and good scalability, but grain boundaries in these materials may affect carrier recombination. Recent studies have shown that passivation of absorber surfaces through the formation of low-dimensional van der Waals materials can improve device performance in polycrystalline thin-film photovoltaics.

JOULE (2021)

Article Energy & Fuels

Interface Engineering of 2D/3D Perovskite Heterojunction Improves Photovoltaic Efficiency and Stability

Chao Ji et al.

Summary: Introducing a long-chain alkyl phenylbutylammonium (PBA(+)) cation to form a 2D/3D heterojunction perovskite effectively passivates surface defects of 3D perovskite, enhancing photoluminescence intensity and carrier lifetime. The 2D layer also improves interface contact and energy-level arrangement, making it a more n-type semiconductor, facilitating electron transfer and transport, leading to enhanced open circuit voltage and fill factor, ultimately improving PCE by 2.54%.

SOLAR RRL (2021)

Article Chemistry, Multidisciplinary

Sulfonate-Assisted Surface Iodide Management for High-Performance Perovskite Solar Cells and Modules

Ruihao Chen et al.

Summary: Surface iodide management using cesium sulfonate can stabilize lead halide perovskite surfaces, reduce surface defects and nonradiative recombination, and improve the efficiency and stability of perovskite solar cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Optics

Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation

Guang Yang et al.

Summary: An effective approach to reduce photovoltage loss in metal halide perovskite solar cells is through the passivation of internal bulk defects and dimensionally graded two-dimensional perovskite interface defects. This method resulted in significantly low photovoltage loss and improved operational stability across different bandgap systems.

NATURE PHOTONICS (2021)

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Article Multidisciplinary Sciences

Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility

Nengxu Li et al.

Summary: The liquid medium annealing (LMA) technology shows promise in producing high-quality perovskite films and photovoltaic devices with improved crystal growth modulation and film uniformity. This method opens up an effective avenue for scalable and reproducible quality improvement in perovskite films and devices.

SCIENCE (2021)

Article Multidisciplinary Sciences

Multimodal host-guest complexation for efficient and stable perovskite photovoltaics

Hong Zhang et al.

Summary: The study adopted a multimodal host-guest complexation strategy to enhance the stability and optoelectronic properties of formamidinium lead iodide perovskites, resulting in high-efficiency and high-stability solar cells. This supramolecular approach demonstrates the broad applications of host-guest chemistry in photovoltaics.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Unraveling the influence of CsCl/MACl on the formation of nanotwins, stacking faults and cubic supercell structure in FA-based perovskite solar cells

Huyen T. Pham et al.

Summary: The addition of CsCl/MACl additives has been found to stabilize the cubic FAPbI3 perovskite, leading to a lattice contraction and changes in the optical bandgap. This results in reduced defects, improved photoluminescence yield, and enhanced device performance, with a maximum efficiency of 21.98% measured for the 10 mol% CsCl perovskite layer.

NANO ENERGY (2021)

Article Chemistry, Physical

Concurrent cationic and anionic perovskite defect passivation enables 27.4% perovskite/silicon tandems with suppression of halide segregation

Furkan H. Isikgor et al.

Summary: The use of molecules containing both electron-rich and electron-poor moieties, such as phenformin hydrochloride (PhenHCl), can improve stability and efficiency of perovskite/silicon tandem solar cells by satisfying the requirements of defect passivation and suppression of light-induced phase segregation.

JOULE (2021)

Article Chemistry, Multidisciplinary

Depth-dependent defect manipulation in perovskites for high-performance solar cells

Yuzhuo Zhang et al.

Summary: A depth-dependent manipulation strategy is demonstrated to concurrently modulate the bulk and interfacial defects in perovskite films, resulting in improved efficiency of PSCs. This strategy provides new insights into spatial defect modulation and may open up promising ways for defect modulator design for highly efficient perovskite optoelectronic devices.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Chemistry, Multidisciplinary

Reducing Detrimental Defects for High-Performance Metal Halide Perovskite Solar Cells

Luis K. Ono et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Physical

Additive Engineering for Efficient and Stable Perovskite Solar Cells

Fei Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

Article Nanoscience & Nanotechnology

MACl-Induced Intermediate Engineering for High-Performance Mixed-Cation Perovskite Solar Cells

Muhammad Mateen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Stable and High-Efficiency Methylammonium-Free Perovskite Solar Cells

Xiao-Xin Gao et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Guanine-Stabilized Formamidinium Lead Iodide Perovskites

Li Hong et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Physical

Phase Behavior and Substitution Limit of Mixed Cesium-Formamidinium Lead Triiodide Perovskites

Bethan Charles et al.

CHEMISTRY OF MATERIALS (2020)

Article Chemistry, Physical

Is Formamidinium Always More Stable than Methylammonium?

Haotong Wei et al.

CHEMISTRY OF MATERIALS (2020)

Article Chemistry, Physical

Raman Spectroscopy of Formamidinium-Based Lead Halide Perovskite Single Crystals

Shuai Ruan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Article Multidisciplinary Sciences

Ultra-high open-circuit voltage of tin perovskite solar cells via an electron transporting layer design

Xianyuan Jiang et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

Structured Perovskite Light Absorbers for Efficient and Stable Photovoltaics

Tingwei He et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Stabilization of Highly Efficient and Stable Phase-Pure FAPbI3Perovskite Solar Cells by Molecularly Tailored 2D-Overlayers

Yuhang Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

Zwitterion-Stabilizing Scalable Bladed α-Phase Cs0.1FA0.9PbI3 Films for Efficient Inverted Planar Perovskite Solar Cells

Ning Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Multidisciplinary

Solvent Engineering Using a Volatile Solid for Highly Efficient and Stable Perovskite Solar Cells

Guohua Wu et al.

ADVANCED SCIENCE (2020)

Review Nanoscience & Nanotechnology

The surface of halide perovskites from nano to bulk

Jingjing Xue et al.

NATURE REVIEWS MATERIALS (2020)

Editorial Material Chemistry, Physical

Stabilizing High Efficiency Perovskite Solar Cells with 3D-2D Heterostructures

Wenchao Huang et al.

JOULE (2020)

Article Chemistry, Multidisciplinary

Precise Control of Perovskite Crystallization Kinetics via Sequential A-Site Doping

Minchao Qin et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Physical

Impact of Moisture on Mobility in Methylammonium Lead Iodide and Formamidinium Lead Iodide

Min Ji Hong et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

Article Energy & Fuels

High-performance perovskite solar cells based on passivating interfacial and intergranular defects

Pengfei Liu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Article Multidisciplinary Sciences

Origin of High Efficiency and Long-Term Stability in Ionic Liquid Perovskite Photovoltaic

Lingfeng Chao et al.

RESEARCH (2020)

Article Chemistry, Physical

Minimizing the Trade-Off between Photocurrent and Photovoltage in Triple-Cation Mixed-Halide Perovskite Solar Cells

Thomas Baumeler et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Article Multidisciplinary Sciences

Solid-phase hetero epitaxial growth of α-phase formamidinium perovskite

Jin-Wook Lee et al.

NATURE COMMUNICATIONS (2020)

Review Chemistry, Physical

A review of aspects of additive engineering in perovskite solar cells

Apurba Mahapatra et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Chemistry, Physical

Recent Advances in Improving Phase Stability of Perovskite Solar Cells

Zhiwen Qiu et al.

SMALL METHODS (2020)

Review Chemistry, Multidisciplinary

Halide Perovskites: Is It All about the Interfaces?

Philip Schulz et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Multidisciplinary

Tailoring Passivation Molecular Structures for Extremely Small Open-Circuit Voltage Loss in Perovskite Solar Cells

Shuang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Article Multidisciplinary Sciences

Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites

Juan-Pablo Correa-Baena et al.

SCIENCE (2019)

Article Multidisciplinary Sciences

Strain engineering in perovskite solar cells and its impacts on carrier dynamics

Cheng Zhu et al.

NATURE COMMUNICATIONS (2019)

Article Multidisciplinary Sciences

Impacts of alkaline on the defects property and crystallization kinetics in perovskite solar cells

Yihua Chen et al.

NATURE COMMUNICATIONS (2019)

Article Nanoscience & Nanotechnology

Air-Stable and Oriented Mixed Lead Halide Perovskite (FA/MA) by the One-Step Deposition Method Using Zinc Iodide and an Alkylammonium Additive

Loreta A. Muscarella et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Retarding Thermal Degradation in Hybrid Perovskites by Ionic Liquid Additives

Rui Xia et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Tracking Structural Phase Transitions in Lead-Halide Perovskites by Means of Thermal Expansion

Masoumeh Keshavarz et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

The Relation between Rotational Dynamics of the Organic Cation and Phase Transitions in Hybrid Halide Perovskites

Sudeep Maheshwari et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Chemistry, Physical

Stability of Cubic FAPbI3 from X-ray Diffraction, Anelastic, and Dielectric Measurements

Francesco Cordero et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Chemistry, Physical

Cation influence on carrier dynamics in perovskite solar cells

Ankur Solanki et al.

NANO ENERGY (2019)

Article Chemistry, Physical

Single-Crystal MAPbI3 Perovskite Solar Cells Exceeding 21% Power Conversion Efficiency

Zhaolai Chen et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Physical

Organic Molecule Orientations and Rashba-Dresselhaus Effect in α-Formamidinium Lead Iodide

Wiwittawin Sukmas et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Energy & Fuels

Effects of thiourea on the perovskite crystallization for fully printable solar cells

Song-Guk Ko et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Article Multidisciplinary Sciences

Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells

Essa A. Alharbi et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

High-Quality (FA)x(MA)1-xPbI3 for Efficient Perovskite Solar Cells via a Facile Cation-Intermixing Technique

Muhammad Mateen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Chemistry, Multidisciplinary

Photochemically Cross-Linked Quantum Well Ligands for 2D/3D Perovskite Photovoltaics with Improved Photovoltage and Stability

Andrew H. Proppe et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Multidisciplinary Sciences

Stabilizing heterostructures of soft perovskite semiconductors

Yanbo Wang et al.

SCIENCE (2019)

Article Chemistry, Multidisciplinary

Template-Assisted Formation of High-Quality α-Phase HC(NH2)2PbI3 Perovskite Solar Cells

Pengju Shi et al.

ADVANCED SCIENCE (2019)

Review Chemistry, Multidisciplinary

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics

Caleb C. Boyd et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Multidisciplinary

Efficient and Stable Low-Bandgap Perovskite Solar Cells Enabled by a CsPbBr3-Cluster Assisted Bottom-up Crystallization Approach

Liqiang Xie et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Chemistry, Multidisciplinary

NbF5: A Novel α-Phase Stabilizer for FA-Based Perovskite Solar Cells with High Efficiency

Shihao Yuan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

A Review of Perovskites Solar Cell Stability

Rui Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Intrinsic Instability of Inorganic-Organic Hybrid Halide Perovskite Materials

Byung-wook Park et al.

ADVANCED MATERIALS (2019)

Review Chemistry, Multidisciplinary

Imperfections and their passivation in halide perovskite solar cells

Bo Chen et al.

CHEMICAL SOCIETY REVIEWS (2019)

Review Chemistry, Multidisciplinary

Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications

Minsu Jung et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Chemistry, Physical

Oxidative Passivation of Metal Halide Perovskites

Julian S. W. Godding et al.

JOULE (2019)

Review Chemistry, Physical

Interface Engineering for Highly Efficient and Stable Planar p-i-n Perovskite Solar Cells

Yang Bai et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Humidity-Induced Degradation via Grain Boundaries of HC(NH2)2PbI3 Planar Perovskite Solar Cells

Jae Sung Yun et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells

Peng Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

Interstitial Occupancy by Extrinsic Alkali Cations in Perovskites and Its Impact on Ion Migration

Jie Cao et al.

ADVANCED MATERIALS (2018)

Article Physics, Multidisciplinary

Intrinsic Instability of the Hybrid Halide Perovskite Semiconductor CH3NH3PbI3

Yue-Yu Zhang et al.

CHINESE PHYSICS LETTERS (2018)

Article Chemistry, Multidisciplinary

Selective growth of layered perovskites for stable and efficient photovoltaics

Kyung Taek Cho et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures

Yun Lin et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Article Chemistry, Multidisciplinary

Hybrid Dion-Jacobson 2D Lead Iodide Perovskites

Lingling Mao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach

Jin-Wook Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering.

Dae-Yong Son et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Multidisciplinary Sciences

Maximizing and stabilizing luminescence from halide perovskites with potassium passivation

Mojtaba Abdi-Jalebi et al.

NATURE (2018)

Article Chemistry, Physical

Fused-Ring Electron Acceptor ITIC-Th: A Novel Stabilizer for Halide Perovskite Precursor Solution

Minchao Qin et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Recent Progress on the Long-Term Stability of Perovskite Solar Cells

Qingxia Fu et al.

ADVANCED SCIENCE (2018)

Article Chemistry, Multidisciplinary

Phase Transitions of Formamidinium Lead Iodide Perovskite under Pressure

Shaojie Jiang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

Article Multidisciplinary Sciences

2D perovskite stabilized phase-pure formamidinium perovskite solar cells

Jin-Wook Lee et al.

NATURE COMMUNICATIONS (2018)

Article Multidisciplinary Sciences

Dipolar cations confer defect tolerance in wide-bandgap metal halide perovskites

Hairen Tan et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21%

Lei Meng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Multidisciplinary Sciences

Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture

Silver-Hamill Turren-Cruz et al.

SCIENCE (2018)

Review Multidisciplinary Sciences

Dimensionality engineering of hybrid halide perovskite light absorbers

Peng Gao et al.

NATURE COMMUNICATIONS (2018)

Article Multidisciplinary Sciences

All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 15%

Kang Wang et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Migration of cations induces reversible performance losses over day/night cycling in perovskite solar cells

Konrad Domanski et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Multidisciplinary

Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells

Fengxian Xie et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Physical

Pressure-Induced Polymorphic, Optical, and Electronic Transitions of Formamidinium Lead Iodide Perovskite

Pan Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Article Chemistry, Multidisciplinary

Universal Dynamics of Molecular Reorientation in Hybrid Lead Iodide Perovskites

Douglas H. Fabini et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Phase Segregation in Cs-, Rb- and K-Doped Mixed-Cation (MA)x(FA)1-xPbl3 Hybrid Perovskites from Solid-State NMR

Dominik J. Kubicki et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Stabilization of the Metastable Lead Iodide Perovskite Phase via Surface Functionalization

Yongping Fu et al.

NANO LETTERS (2017)

Article Chemistry, Multidisciplinary

Gold and iodine diffusion in large area perovskite solar cells under illumination

S. Cacovich et al.

NANOSCALE (2017)

Article Multidisciplinary Sciences

Origin of long lifetime of band-edge charge carriers in organic-inorganic lead iodide perovskites

Tianran Chen et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Review Multidisciplinary Sciences

Promises and challenges of perovskite solar cells

Juan-Pablo Correa-Baena et al.

SCIENCE (2017)

Article Chemistry, Multidisciplinary

Exciton Recombination in Formamidinium Lead Triiodide: Nanocrystals versus Thin Films

Hong-Hua Fang et al.

SMALL (2017)

Article Multidisciplinary Sciences

One-Year stable perovskite solar cells by 2D/3D interface engineering

G. Grancini et al.

NATURE COMMUNICATIONS (2017)

Review Chemistry, Physical

The Emergence of the Mixed Perovskites and Their Applications as Solar Cells

Jia-Wen Xiao et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Understanding the stability of mixed A-cation lead iodide perovskites

Bethan Charles et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Good Vibrations: Locking of Octahedral Tilting in Mixed-Cation Iodide Perovskites for Solar Cells

Dibyajyoti Ghosh et al.

ACS ENERGY LETTERS (2017)

Article Multidisciplinary Sciences

Modulated CH3NH3PbI3-xBrx film for efficient perovskite solar cells exceeding 18%

Yongguang Tu et al.

SCIENTIFIC REPORTS (2017)

Article Multidisciplinary Sciences

Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite

Zeguo Tang et al.

SCIENTIFIC REPORTS (2017)

Article Physics, Condensed Matter

Applications of cesium in the perovskite solar cells

Fengjun Ye et al.

JOURNAL OF SEMICONDUCTORS (2017)

Article Chemistry, Multidisciplinary

Precise Facet Engineering of Perovskite Single Crystals by Ligand-Mediated Strategy

Meng-Huan Jao et al.

CRYSTAL GROWTH & DESIGN (2017)

Article Chemistry, Multidisciplinary

The Role of Rubidium in Multiple-Cation-Based High-Efficiency Perovskite Solar Cells

Pankaj Yadav et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

Methylammonium-Mediated Evolution of Mixed-Organic-Cation Perovskite Thin Films: A Dynamic Composition-Tuning Process

Chongwen Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Review Chemistry, Multidisciplinary

Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells

Jin-Wook Lee et al.

ACCOUNTS OF CHEMICAL RESEARCH (2016)

Article Chemistry, Multidisciplinary

Ion-Exchange-Induced 2D-3D Conversion of HMA1-xFAxPbI3Cl Perovskite into a High-Quality MA1-xFAxPbI3 Perovskite

Ge Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Multidisciplinary

Reentrant Structural and Optical Properties and Large Positive Thermal Expansion in Perovskite Formamidinium Lead Iodide

Douglas H. Fabini et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Multidisciplinary

Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification

Wenzhe Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Entropic stabilization of mixed A-cation ABX(3) metal halide perovskites for high performance perovskite solar cells

Chenyi Yi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells

T. Jesper Jacobsson et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency

Michael Saliba et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Physical

Nucleation and Growth Control of HC(NH2)2PbI3 for Planar Perovskite Solar Cell

Jincheol Kim et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Article Chemistry, Physical

Dielectric and Thermodynamic Signatures of Low-Temperature Glassy Dynamics in the Hybrid Perovskites CH3NH3PbI3 and HC(NH2)2PbI3

Douglas H. Fabini et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Article Chemistry, Multidisciplinary

Ligand-Stabilized Reduced-Dimensionality Perovskites

Li Na Quan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

Exceptional Morphology-Preserving Evolution of Formamidinium Lead Triiodide Perovskite Thin Films via Organic-Cation Displacement

Yuanyuan Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Multidisciplinary Sciences

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells

Hsinhan Tsai et al.

NATURE (2016)

Article Chemistry, Physical

Influence of the mixed organic cation ratio in lead iodide based perovskite on the performance of solar cells

Manuel Salado et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Article Multidisciplinary Sciences

A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells

David P. McMeekin et al.

SCIENCE (2016)

Article Multidisciplinary Sciences

Photo-induced halide redistribution in organic-inorganic perovskite films

Dane W. deQuilettes et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Physical

Phase behaviour and composition in the formamidinium-methylammonium hybrid lead iodide perovskite solid solution

O. J. Weber et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

Cross-Linkable Fullerene Derivatives for Solution-Processed n-i-p Perovskite Solar Cells

Konrad Wojciechowski et al.

ACS ENERGY LETTERS (2016)

Article Chemistry, Physical

Improved Phase Stability of Formamidinium Lead Triiodide Perovskite by Strain Relaxation

Xiaojia Zheng et al.

ACS ENERGY LETTERS (2016)

Article Chemistry, Physical

Correlations between Immobilizing Ions and Suppressing Hysteresis in Perovskite Solar Cells

Yicheng Zhao et al.

ACS ENERGY LETTERS (2016)

Editorial Material Energy & Fuels

Commercial progress and challenges for photovoltaics

Martin A. Green

NATURE ENERGY (2016)

Article Multidisciplinary Sciences

Entropy-driven structural transition and kinetic trapping in formamidinium lead iodide perovskite

Tianran Chen et al.

SCIENCE ADVANCES (2016)

Article Multidisciplinary Sciences

On the Thermal and Thermodynamic (In)Stability of Methylammonium Lead Halide Perovskites

Bruno Brunetti et al.

SCIENTIFIC REPORTS (2016)

Article Multidisciplinary Sciences

Structures, Phase Transitions and Tricritical Behavior of the Hybrid Perovskite Methyl Ammonium Lead Iodide

P. S. Whitfield et al.

SCIENTIFIC REPORTS (2016)

Article Chemistry, Multidisciplinary

Charge-Carrier Dynamics and Mobilities in Formamidinium Lead Mixed-Halide Perovskites

Waqaas Rehman et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Physical

Additive-Modulated Evolution of HC(NH2)2PbI3 Black Polymorph for Mesoscopic Perovskite Solar Cells

Zaiwei Wang et al.

CHEMISTRY OF MATERIALS (2015)

Article Chemistry, Physical

Stabilization of the Trigonal High-Temperature Phase of Formamidinium Lead Iodide

Andreas Binek et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Physical

Temperature- and Component-Dependent Degradation of Perovskite Photovoltaic Materials under Concentrated Sunlight

Ravi K. Misra et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Physical

Cubic Perovskite Structure of Black Formamidinium Lead Iodide, α-[HC(NH2)2]PbI3, at 298 K

Mark T. Weller et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Multidisciplinary

Controllable Grain Morphology of Perovskite Absorber Film by Molecular Self-Assembly toward Efficient Solar Cell Exceeding 17%

Wenzhe Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Multidisciplinary

Transformation of the Excited State and Photovoltaic Efficiency of CH3NH3PbI3 Perovskite upon Controlled Exposure to Humidified Air

Jeffrey A. Christians et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Multidisciplinary Sciences

Compositional engineering of perovskite materials for high-performance solar cells

Nam Joong Jeon et al.

NATURE (2015)

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

Article Multidisciplinary Sciences

Impact of microstructure on local carrier lifetime in perovskite solar cells

Dane W. deQuilettes et al.

SCIENCE (2015)

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Article Chemistry, Multidisciplinary

Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics

Eric T. Hoke et al.

CHEMICAL SCIENCE (2015)

Article Multidisciplinary Sciences

Perovskite-fullerene hybrid materials suppress hysteresis in planar diodese

Jixian Xu et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell

Jin-Wook Lee et al.

ADVANCED ENERGY MATERIALS (2015)

Article Chemistry, Physical

Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite

Bert Conings et al.

ADVANCED ENERGY MATERIALS (2015)

Article Chemistry, Physical

Procedures and Practices for Evaluating Thin-Film Solar Cell Stability

Roland Roesch et al.

ADVANCED ENERGY MATERIALS (2015)

Article Chemistry, Physical

Efficient, Semitransparent Neutral-Colored Solar Cells Based on Microstructured Formamidinium Lead Trihalide Perovskite

Giles E. Eperon et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Multidisciplinary

Mixed-Organic-Cation Perovskite Photovoltaics for Enhanced Solar-Light Harvesting

Norman Pellet et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Article Chemistry, Multidisciplinary

Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells

Giles E. Eperon et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Formamidinium-Containing Metal-Halide: An Alternative Material for Near-IR Absorption Perovskite Solar Cells

Teck Ming Koh et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

Article Chemistry, Multidisciplinary

Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells

Jarvist M. Frost et al.

NANO LETTERS (2014)

Article Nanoscience & Nanotechnology

Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells

Jeong-Hyeok Im et al.

NATURE NANOTECHNOLOGY (2014)

Article Chemistry, Multidisciplinary

Solid-state principles applied to organic-inorganic perovskites: new tricks for an old dog

Gregor Kieslich et al.

CHEMICAL SCIENCE (2014)

Article Multidisciplinary Sciences

Steric engineering of metal-halide perovskites with tunable optical band gaps

Marina R. Filip et al.

NATURE COMMUNICATIONS (2014)

Article Multidisciplinary Sciences

Excitons versus free charges in organo-lead tri-halide perovskites

Valerio D'Innocenzo et al.

NATURE COMMUNICATIONS (2014)

Article Multidisciplinary Sciences

Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3

Guichuan Xing et al.

SCIENCE (2013)

Article Energy & Fuels

Strong Internal and External Luminescence as Solar Cells Approach the Shockley-Queisser Limit

Owen D. Miller et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2012)

Article Energy & Fuels

Consensus stability testing protocols for organic photovoltaic materials and devices

Matthew O. Reese et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)