4.8 Article

Chlorobenzenesulfonic Potassium Salts as the Efficient Multifunctional Passivator for the Buried Interface in Regular Perovskite Solar Cells

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Halide Perovskite Solar Cells for Building Integrated Photovoltaics: Transforming Building Facades into Power Generators

Teck Ming Koh et al.

Summary: The rapid emergence of organic-inorganic lead halide perovskites has made them promising candidates for low-cost and high-efficiency photovoltaics. This review highlights the unique features and properties of perovskite solar cells (PSCs) for building-integrated photovoltaics (BIPVs). The article discusses device engineering, optical management strategies, and the performance of PSCs under different conditions relevant to BIPV. It also showcases recent outdoor stability testing and scalability demonstrations, as well as the challenges and future opportunities for perovskite-based BIPV.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Buried Interfaces in Halide Perovskite Photovoltaics

Xiaoyu Yang et al.

Summary: Research has shown that losses at buried interfaces in perovskite photovoltaics are mainly caused by sub-microscale extended imperfections and lead-halide inhomogeneities, which are major obstacles to improving device performance. By utilizing passivation molecules for microstructural reconstruction, these losses can be significantly reduced, unlocking the full potential for enhancing device performance.

ADVANCED MATERIALS (2021)

Article Engineering, Environmental

Batch chemical bath deposition of large-area SnO2 film with mercaptosuccinic acid decoration for homogenized and efficient perovskite solar cells

Jibo Zhang et al.

Summary: A modified double chemical bath deposition (DC) process was used to fabricate large-area tin oxide films for perovskite solar cells, leading to homogenized performance and improved efficiency, stability, and homogeneity of the devices. Introduction of mercaptosuccinic acid at the SnO2/perovskite interface further enhanced the power conversion efficiency, resulting in high efficiency perovskite devices. These findings suggest great potential for large-area and high efficiency perovskite module preparation using this modified CBD route.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Rubidium Fluoride Modified SnO2 for Planar n-i-p Perovskite Solar Cells

Jing Zhuang et al.

Summary: Regulating the electron transport layer (ETL) using the cost-effective modification material rubidium fluoride (RbF) can enhance the electron mobility of SnO2 and suppress hysteresis in perovskite solar cells (PSCs). Double-sided passivated PSCs with RbF on the SnO2 surface and p-methoxyphenethylammonium iodide on the perovskite surface achieved an outstanding PCE result with a small V-oc deficit.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

Tin Oxide Electron-Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells

Cesur Altinkaya et al.

Summary: Tin oxide (SnO2) has emerged as a promising alternative to electron-selective layers (ESLs) in perovskite solar cells (PSCs), offering advantages such as high optical transmission, high carrier mobility, and low-temperature processability. It has the potential to play a key role in large-scale deployment and manufacturing.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Article Chemistry, Physical

Cobalt Chloride Hexahydrate Assisted in Reducing Energy Loss in Perovskite Solar Cells with Record Open-Circuit Voltage of 1.20 V

Pengyang Wang et al.

Summary: By introducing cobalt chloride hexahydrate (CoCl2 center dot 6H(2)O) into SnO2 film, favorable energy level alignment and better charge extraction were achieved, leading to an enhanced V-OC and efficiency. This doping method provides an effective strategy for reducing energy loss and enhancing the efficiency of perovskite solar cells.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

A Highly Tolerant Printing for Scalable and Flexible Perovskite Solar Cells

Zhi Xing et al.

Summary: This study successfully improved the efficiency and air stability of flexible perovskite solar cells by introducing methylammonium acetate as ink assistant and 4-chlorobenzenesulfonic acid as a passivation layer on the perovskite interface.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Engineering, Environmental

Interfacial defect passivation and stress release by multifunctional KPF6 modification for planar perovskite solar cells with enhanced efficiency and stability

Huan Bi et al.

Summary: This study presents a multifunctional interface modification strategy using KPF6 molecule to improve the interface contact and enhance the efficiency and stability of PSCs. The KPF6 modification leads to improved film quality, defect passivation, and stress release, resulting in a significant enhancement in efficiency and stability of the devices.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Sulfonate-Assisted Surface Iodide Management for High-Performance Perovskite Solar Cells and Modules

Ruihao Chen et al.

Summary: Surface iodide management using cesium sulfonate can stabilize lead halide perovskite surfaces, reduce surface defects and nonradiative recombination, and improve the efficiency and stability of perovskite solar cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Article Chemistry, Multidisciplinary

Halogen-halogen bonds enable improved long-term operational stability of mixed-halide perovskite photovoltaics

Xinliang Fu et al.

Summary: The introduction of halogen-halogen bonds at the phase interface successfully suppresses ion migration in mixed-halide perovskite, leading to a stable and efficient photovoltaic device. Encapsulated devices exhibit long-term stability and high performance, offering a new solution to the stability challenges of perovskite materials.
Article Chemistry, Physical

Multifunctional organic ammonium salt-modified SnO2 nanoparticles toward efficient and stable planar perovskite solar cells

Huan Bi et al.

Summary: The novel and effective multifunctional modification strategy through incorporating Girard's Reagent T (GRT) molecules can significantly reduce the bulk and interfacial nonradiative recombination losses in SnO2-based perovskite solar cells, leading to improved power conversion efficiency and stability.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

Semitransparent Perovskite Solar Cells: From Materials and Devices to Applications

Biao Shi et al.

ADVANCED MATERIALS (2020)

Review Chemistry, Multidisciplinary

Recent Progress in Chlorinated Organic Photovoltaic Materials

Huifeng Yao et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

Article Chemistry, Multidisciplinary

Modification Engineering in SnO2Electron Transport Layer toward Perovskite Solar Cells: Efficiency and Stability

Kaimo Deng et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Molecular Interaction Regulates the Performance and Longevity of Defect Passivation for Metal Halide Perovskite Solar Cells

Yepin Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Physical

Conjugated polyelectrolyte with potassium cations enables inverted perovskite solar cells with an efficiency over 20%

Luozheng Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Choline Chloride-Modified SnO2 Achieving High Output Voltage in MAPbI3 Perovskite Solar Cells

Jingjing Yang et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Materials Science, Multidisciplinary

Chlorine-modified SnO2 electron transport layer for high-efficiency perovskite solar cells

Xiaodong Ren et al.

INFOMAT (2020)

Review Chemistry, Multidisciplinary

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena et al.

CHEMICAL REVIEWS (2019)

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Nanoscience & Nanotechnology

Achieving High Open-Circuit Voltage on Planar Perovskite Solar Cells via Chlorine -Doped Tin Oxide Electron Transport Layers

Jiwei Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Charge Transfer and Diffusion at the Perovskite/PCBM Interface Probed by Transient Absorption and Reflection

Meng Zhou et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Review Chemistry, Multidisciplinary

A Review of Perovskites Solar Cell Stability

Rui Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Jason J. Yoo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Multidisciplinary

Stable perovskite solar cells using tin acetylacetonate based electron transporting layers

Mousa Abuhelaiqa et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Multidisciplinary

Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering.

Dae-Yong Son et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Highly Efficient Perovskite Solar Cells with Gradient Bilayer Electron Transport Materials

Xiu Gong et al.

NANO LETTERS (2018)

Article Chemistry, Multidisciplinary

Thermally stable, planar hybrid perovskite solar cells with high efficiency

Kyoungwon Choi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells

Lijian Zuo et al.

NANO LETTERS (2017)

Article Chemistry, Multidisciplinary

Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films

Qi Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Nanoscience & Nanotechnology

Enhancing Efficiency of Perovskite Solar Cells via Surface Passivation with Graphene Oxide Interlayer

Hao Li et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide

Elham Halvani Anaraki et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Dual nature of the excited state in organic-inorganic lead halide perovskites

Kevin G. Stamplecoskie et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Multidisciplinary

Femtosecond Time-Resolved Transient Absorption Spectroscopy of CH3NH3PbI3 Perovskite Films: Evidence for Passivation Effect of PbI2

Lili Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Review Chemistry, Physical

Halogenated Materials as Organic Semiconductors

Ming L. Tang et al.

CHEMISTRY OF MATERIALS (2011)

Article Physics, Multidisciplinary

Origins of coexistence of conductivity and transparency in SnO2 -: art. no. 095501

Ç Kiliç et al.

PHYSICAL REVIEW LETTERS (2002)