Related references
Note: Only part of the references are listed.Mechanical performance of 3D woven jute/green epoxy composites with novel weaving patterns
Muhammad Umair et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
Effect of the stuffer yarns on the mechanical performance of novel 3D woven green composites
Madeha Jabbar et al.
COMPOSITE STRUCTURES (2021)
Effect of structural parameters on the impact properties of multilayer composites from Tururi palm (Manicaria saccifera Gaertn.) fibrous material
Mohamad Midani et al.
JOURNAL OF NATURAL FIBERS (2020)
Comparison of Mechanical Behavior of Biaxial, Unidirectional and Standard Woven Fabric Reinforced Composites
Usman Ahmed et al.
FIBERS AND POLYMERS (2020)
Optimization of 3D woven preform for improved mechanical performance
Muhammad Kashif et al.
JOURNAL OF INDUSTRIAL TEXTILES (2019)
The effect of the through-thickness yarn component on the in- and out-of-plane properties of composites from 3D orthogonal woven preforms
Mohamad Midani et al.
JOURNAL OF THE TEXTILE INSTITUTE (2019)
Development & Characterization of Green Composites Using Novel 3D Woven Preforms
Yasir Nawab et al.
APPLIED COMPOSITE MATERIALS (2018)
Investigation of mechanical behavior of woven/knitted hybrid composites
Waqas Ashraf et al.
JOURNAL OF THE TEXTILE INSTITUTE (2017)
Characterising the loading direction sensitivity of 3D woven composites.: Effect of z-binder architecture
Mohamed Nasr Saleh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Evolution of damage during the fatigue of 3D woven glass-fibre reinforced composites subjected to tension-tension loading observed by time-lapse X-ray tomography
B. Yu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Open hole quasi-static and fatigue characterisation of 3D woven composites
S. Dai et al.
COMPOSITE STRUCTURES (2015)
Fabrication and characterization of three dimensional woven carbon fiber/silica ceramic matrix composites
Tianqi Gao et al.
COMPOSITES PART B-ENGINEERING (2015)
Development of a biocomposite based on green epoxy polymer and natural cellulose fabric (bark cloth) for automotive instrument panel applications
Samson Rwawiire et al.
COMPOSITES PART B-ENGINEERING (2015)
General definition of 3D warp interlock fabric architecture
Francois Boussu et al.
COMPOSITES PART B-ENGINEERING (2015)
Effect of manufacturing defects on mechanical properties and failure features of 3D orthogonal woven C/C composites
Ai Shigang et al.
COMPOSITES PART B-ENGINEERING (2015)
Dynamic Response of Orthogonal Three-Dimensional Woven Carbon Composite Beams Under Soft Impact
P. Turner et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2015)
Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material
Azam Ali et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Development and characterization of three-dimensional woven-shaped preforms and their associated composites
Muhammad Umair et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Geometrical modelling of orthogonal/layer-to-layer woven interlock carbon reinforcement
Saad Nauman et al.
JOURNAL OF THE TEXTILE INSTITUTE (2015)
Drop-weight impact behaviour of woven hybrid basalt-carbon/epoxy composites
F. Sarasini et al.
COMPOSITES PART B-ENGINEERING (2014)
Novelties of 3-D woven composites and nanocomposites
Rajesh Mishra et al.
JOURNAL OF THE TEXTILE INSTITUTE (2014)
Influence of crimp on 3D-woven fibre reinforced composites
Fredrik Stig et al.
COMPOSITE STRUCTURES (2013)
X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact
R. Seltzer et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
An experimental investigation into structure and properties of 3D-woven aramid and PBO fabrics
B. K. Behera et al.
JOURNAL OF THE TEXTILE INSTITUTE (2013)
Quasi-static tensile behavior and damage of carbon/epoxy composite reinforced with 3D non-crimp orthogonal woven fabric
Alexander E. Bogdanovich et al.
MECHANICS OF MATERIALS (2013)
Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites
P. Potluri et al.
APPLIED COMPOSITE MATERIALS (2012)
Green composites from sustainable cellulose nanofibrils: A review
H. P. S. Abdul Khalil et al.
CARBOHYDRATE POLYMERS (2012)
Mechanical properties and microstructure of 2.5D (shallow straight-joint) quartz fibers-reinforced silica composites by silicasol-infiltration-sintering
Yong Liu et al.
CERAMICS INTERNATIONAL (2012)
Improved analytical model to predict the effective elastic properties of 2.5D interlock woven fabrics composite
Ali Hallal et al.
COMPOSITE STRUCTURES (2012)
Damage analysis of thin 3D-woven SiC/SiC composite under low velocity impact loading
V. Herb et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading
Robert Gerlach et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Shock response of 3D woven composites: An experimental investigation
M. Pankow et al.
COMPOSITE STRUCTURES (2011)
Fatigue tensile behavior of carbon/epoxy composite reinforced with non-crimp 3D orthogonal woven fabric
Mehmet Karahan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Impact Damage of 3D Cellular Woven Composite from Unit-cell Level Analysis
Yuyuan Tang et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2011)
A corrective function for the estimation of the longitudinal Young's modulus in a developed analytical model for 2.5D woven composites
Ali Hallal et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
A Review of Preforms for the Composites Industry
P. M. Wambua et al.
JOURNAL OF INDUSTRIAL TEXTILES (2011)
The Influence of Through-The-Thickness Binder Yarn Count on Fibre Volume Fraction, Crimp and Damage Tolerance Within 3D Woven Carbon Fibre Composites
R. S. King et al.
POLYMERS & POLYMER COMPOSITES (2009)
Study of 2.5-D glass-fabric-reinforced light-curable resin composites for orthotic applications
Y. Z. Wan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Impact and post impact response of laminated beams at low temperatures
Samuel I. Ibekwe et al.
COMPOSITE STRUCTURES (2007)
Impact and post impact behavior of composite sandwich panels
Patrick M. Schubel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Low-velocity impact damage accumulation in woven S2-glass composite systems
J. N. Baucom et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Low-velocity impact damage progression in woven E-glass composite systems
JN Baucom et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Impact-induced deformation fields in 2D and 3D woven composites
YA Bahei-El-Din et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Micromechanics of damage accumulation in a 2.5D woven C-fiber/SiC ceramic composite
N Jekabsons et al.
MECHANICS OF COMPOSITE MATERIALS (2001)
Share Paper
