Related references
Note: Only part of the references are listed.Effect of high pressure torsion process on the microhardness, microstructure and tribological property of Ti6Al4V alloy
Guanyu Deng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Microstructure Evolution and Mechanical Properties of Ti-6Al-4V Alloy Prepared by Multipass Equal Channel Angular Pressing
Zhiyong Zhao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Influence of Fe addition in CP titanium on phase transformation, microstructure and mechanical properties during high pressure torsion
Guanyu Deng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy
Guanyu Deng et al.
TRIBOLOGY INTERNATIONAL (2020)
Enhancing Hardness and Wear Performance of Laser Additive Manufactured Ti6Al4V Alloy Through Achieving Ultrafine Microstructure
Yanqin Li et al.
MATERIALS (2020)
Microstructure evolution and wear behavior of titanium alloy under cryogenic dry sliding wear condition
Zeju Weng et al.
MATERIALS CHARACTERIZATION (2020)
Grain coarsening of nano laminated structure in martensite steel under sliding wear
Qing-Yuan Gao et al.
TRIBOLOGY INTERNATIONAL (2020)
Characterizing deformation behaviour of an oxidized high speed steel: Effects of nanoindentation depth, friction and oxide scale porosity
G. Y. Deng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Dynamic transformation during the high temperature deformation of two-phase titanium alloys
Baoqi Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Nanoindentation characterization on local plastic response of Ti-6Al-4V under high-load spherical indentation
Yan Wen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
On the strain hardening abilities of α plus β titanium alloys: The roles of strain partitioning and interface length density
Yan Chong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures
Yan Chong et al.
SCRIPTA MATERIALIA (2019)
Tribology of Ti6Al4V: A review
Jibin T. Philip et al.
FRICTION (2019)
Evolution of nano-laminated structure formed by the thermally-assisted plastic deformation in dry sliding wear
Yun-Shuai Su et al.
TRIBOLOGY INTERNATIONAL (2019)
Nano- and micro-tribological behaviours of plasma nitrided Ti6Al4V alloys
Aniruddha Samanta et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
An investigation of the limits of grain refinement after processing by a combination of severe plastic deformation techniques: A comparison of Al and Mg alloys
Shima Sabbaghianrad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Grain refinement and superplastic flow in a fully lamellar Ti-6Al-4V alloy processed by high-pressure torsion
Wenjing Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Mechanical properties and microstructure of a Ti-6A1-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling
Hailiang Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Theoretical and experimental investigation of thermal and oxidation behaviours of a high speed steel work roll during hot rolling
G. Y. Deng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
The influence of defect structures on the mechanical properties of Ti-6Al-4V alloys deformed by high-pressure torsion at ambient temperature
Zheng-Yang Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of Mo addition on the microstructure and hardness of ultrafine-grained Ni alloys processed by a combination of cryorolling and high-pressure torsion
Garima Kapoor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Wear behavior of Ti6Al4V biomedical alloys processed by selective laser melting, hot pressing and conventional casting
F. Bartolomeu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Wear resistance enhancement of titanium alloy (Ti-6A1-4V) by ball burnishing process
Goutam Devaraya Revankar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)
Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing
Guanyu Deng et al.
7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (2017)
Stress-induced twinning of nanocrystalline hexagonal close-packed titanium in Ti-6Al-4V
Y. G. Liu et al.
MATERIALS LETTERS (2016)
Deformation induced face-centered cubic titanium and its twinning behavior in Ti-6Al-4V
Y. G. Liu et al.
SCRIPTA MATERIALIA (2016)
Transition between mild and severe wear in titanium alloys
K. Farokhzadeh et al.
TRIBOLOGY INTERNATIONAL (2016)
Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting
Xiaoli Zhao et al.
MATERIALS & DESIGN (2016)
Enhancing wear resistance of Cu-Al alloy by controlling subsurface dynamic recrystallization
X. Chen et al.
SCRIPTA MATERIALIA (2015)
Effects of sliding velocity on tribo-oxides and wear behavior of Ti-6Al-4V alloy
X. X. Li et al.
TRIBOLOGY INTERNATIONAL (2015)
Sliding wear behavior of sub-microcrystalline pure iron produced by high-pressure torsion straining
Hirotaka Kato et al.
WEAR (2015)
Influence of phase volume fraction on the grain refining of a Ti-6Al-4V alloy by high-pressure torsion
Jie Fu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Fatigue Life and Failure Characteristics of an Ultrafine-Grained Ti-6Al-4V Alloy Processed by ECAP and Extrusion
Alexander V. Polyakov et al.
ADVANCED ENGINEERING MATERIALS (2014)
Grain coarsening behavior in a nanocrystalline copper subjected to sliding friction
Y. S. Zhang et al.
MATERIALS LETTERS (2014)
Effect of combination treatment on wear resistance and strength of Ti-6Al-4V alloy
Tatsuro Morita et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Perspectives on Titanium Science and Technology
Dipankar Banerjee et al.
ACTA MATERIALIA (2013)
Effect of heat treatment on microstructure and microhardness evolution in a Ti-6Al-4V alloy processed by high-pressure torsion
Ying Chun Wang et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Tribo-layer and its role in dry sliding wear of Ti-6Al-4V alloy
Y. S. Mao et al.
WEAR (2013)
Impurity Effect on Wear Resistance of Ultrafine-Grained Copper
Bin Yao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Fretting wear and friction reduction of CP titanium and Ti-6Al-4V alloy by ultrasonic nanocrystalline surface modification
Auezhan Amanov et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Wear Characteristics of Ti-6Al-4V Alloy at 20-400°C
X. H. Cui et al.
TRIBOLOGY TRANSACTIONS (2012)
Comparisons of dry sliding tribological behaviors between coarse-grained and nanocrystalline copper
W. L. Li et al.
WEAR (2012)
High-Temperature Galling Characteristics of TI-6AL-4V with and without Surface Treatments
Peter J. Blau et al.
TRIBOLOGY TRANSACTIONS (2011)
Metallurgical analysis and nanoindentation characterization of Ti-6Al-4V workpiece and chips in high-throughput drilling
Rui Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Microstructure and tribological characteristics of Ti-6Al-4V alloy against GCr15 under high speed and dry sliding
Qiu Ming et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Improvement of wear resistance of Ti-6Al-4V alloy by means of thermal oxidation
F Borgioli et al.
MATERIALS LETTERS (2005)
Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces
J Qu et al.
WEAR (2005)
Share Paper
