4.7 Review

A critical evaluation of molecularly imprinted polymer (MIP) coatings in solid phase microextraction devices

Related references

Note: Only part of the references are listed.
Review Chemistry, Analytical

Green molecularly imprinted polymers for sustainable sample preparation

Antonio Martin-Esteban

Summary: The use of molecularly imprinted polymers in sample preparation as selective sorbent materials has gained significant attention in recent years, leading to analytical methods with unprecedented selectivity. However, with the increasing adoption of Green Analytical Chemistry principles, it is important to critically review the greenness of synthesis and further application of molecularly imprinted polymers. This review discusses the preparation steps and strategies, reagents used, as well as their incorporation into microextraction techniques from a green perspective, and offers recent alternatives to enhance the sustainability of molecularly imprinted polymers.

JOURNAL OF SEPARATION SCIENCE (2022)

Review Chemistry, Analytical

Restricted Access Molecularly Imprinted Polymers for Biological Sample Preparation

Tassia Venga Mendes et al.

Summary: Restricted access molecularly imprinted polymers (RAMIPs) have been successfully employed for the extraction of small organic molecules from untreated biological samples. These materials combine the selectivity of molecularly imprinted polymers (MIPs) with the ability to exclude macromolecules, and have potential applications in biological sample preparation. However, there are remaining challenges that need to be addressed.

BRAZILIAN JOURNAL OF ANALYTICAL CHEMISTRY (2022)

Article Chemistry, Analytical

Dummy template based molecularly imprinted solid-phase microextraction coating for analysis of trace disinfection by-product of 2,6-dichloro-1,4--benzoquinone using high-performance liquid chromatography

Weiliang Xue et al.

Summary: This study successfully utilized molecularly imprinted solid-phase microextraction technology to detect trace 2,6-DCBQ in drinking water with good selectivity and sensitivity. By coupling with HPLC-UV detection, a sensitive analytical method was established for the detection of trace 2,6-DCBQ in water samples, improving the practicality of DBPs monitoring and detection methodology.

TALANTA (2022)

Article Chemistry, Analytical

Micro-gel thin film molecularly imprinted polymer coating for extraction of organophosphorus pesticides from water and beverage samples

Ali Azizi et al.

Summary: This study introduces an effective thin film MIP for high throughput enrichment of organophosphorus pesticides from water and beverage samples, followed by LC-MS/MS analysis. By introducing a pseudo-phase diagram, the fabrication of thin film MIPs was optimized, along with other factors influencing their selectivity and stability.

ANALYTICA CHIMICA ACTA (2021)

Review Biochemical Research Methods

Stir bar sorptive extraction and its application

Man He et al.

Summary: This review summarizes the recent progress of stir bar sorptive extraction (SBSE) in the past six years, focusing on the preparation methods and new materials for coated stir bars. The discussion also includes the development and prospects of SBSE as an efficient sample pretreatment technique in real sample analysis.

JOURNAL OF CHROMATOGRAPHY A (2021)

Review Chemistry, Analytical

Nanoparticle coatings for stir bar sorptive extraction, synthesis, characterization and application

Sayyed Hossein Hashemi et al.

Summary: This article reviews the various applications, advantages and disadvantages of nano-coatings as media for micmextraction by stir bar, analyzing the critical evaluation of currently available methods. It is shown that using nano-coatings as coatings can improve the efficiency of stir bar sorption extraction.

TALANTA (2021)

Article Chemistry, Analytical

Porous thin-film molecularly imprinted polymer device for simultaneous determination of phenol, alkylphenol and chlorophenol compounds in water

Ghadeer F. Abu-Alsoud et al.

Summary: A porous water-compatible molecularly imprinted polymer (MIP) coating was developed for the extraction of phenols from environmental water samples using catechol as a pseudo-template and a water-soluble functional monomer. The method combined with ultra high performance liquid chromatography with a photodiode array detector (UHPLC-PDA) is suitable for simultaneous determination of trace levels of phenolic compounds in seawater and produced water, showing high efficiency, low LOD, good linearity, and recoveries ranging from 81-107%. The MIP-based extraction method is easy to multiplex for high throughput sample processing due to small sample size and limited sample manipulation.

TALANTA (2021)

Article Chemistry, Multidisciplinary

Molecularly imprinted electrospun nanofibre membrane assisted stir bar sorptive extraction for trace analysis of sulfonamides from animal feeds

Yahan Cui et al.

Summary: The study developed a new method for determining sulfa antibiotics in feeds by molecularly imprinted electrospun nanofibre membrane (MIM) assisted stir bar sorptive extraction, achieving selective enrichment of SAs.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Review Chemistry, Multidisciplinary

Molecular Imprinting: Green Perspectives and Strategies

Maryam Arabi et al.

Summary: Advances in revolutionary technologies present new challenges for mankind, requiring a shift towards greener pathways. Molecular imprinting technology (MIT), with its rapid progress and wide applications, faces the challenge of complying with green sustainable development requirements. The emergence of green MIT highlights the need for environmentally friendly practices in this field.

ADVANCED MATERIALS (2021)

Article Biochemical Research Methods

Dummy molecularly imprinted membranes based on an eco-friendly synthesis approach for recognition and extraction of enrofloxacin and ciprofloxacin in egg samples

Yue Yuan et al.

Summary: Novel dummy molecularly imprinted membranes (MIMs) were successfully fabricated for recognition and extraction of enrofloxacin and ciprofloxacin in egg samples. Characterization and adsorption affinity tests confirmed the specific recognition capacity and stability of the prepared materials. Optimization of pretreatment procedures with UHPLC detection showed promising results in terms of correlation, detection limit, and recovery rate.

JOURNAL OF CHROMATOGRAPHY A (2021)

Review Biochemistry & Molecular Biology

A Note about Crosslinking Density in Imprinting Polymerization

Anja Mueller

Summary: Imprinting polymerization is an exciting technique that produces specific binding sites for various applications like sensors, detectors, and catalysts. The literature review highlights the importance of crosslinking density in governing the physical properties, capacity, and selectivity of the resulting MIPs, suggesting the need for more research to determine the optimal crosslinking density.

MOLECULES (2021)

Review Biochemistry & Molecular Biology

Factors Affecting Preparation of Molecularly Imprinted Polymer and Methods on Finding Template-Monomer Interaction as the Key of Selective Properties of the Materials

Aliya Nur Hasanah et al.

Summary: Molecular imprinting is a technique that creates artificial recognition sites on polymer matrices with high selectivity and affinity for target molecules. The success of Molecularly Imprinted Polymers depends on the interaction between template and monomers.

MOLECULES (2021)

Article Chemistry, Analytical

Thin film molecularly imprinted polymer (TF-MIP), a selective and single-use extraction device for high-throughput analysis of biological samples†

Fereshteh Shahhoseini et al.

Summary: The utilization of thin film MIP technology facilitates efficient extraction of TCAs from biological matrices with high linearity, accuracy, and precision. The method demonstrates good performance in monitoring TCA concentration in pooled human plasma samples.

ANALYST (2021)

Review Chemistry, Analytical

Sample Preparation Using Molecularly Imprinted Polymers

Valerie Pichon et al.

ANALYTICAL CHEMISTRY (2020)

Article Polymer Science

Synthetic Mechanism of Molecular Imprinting at the Solid Phase

Todd Cowen et al.

MACROMOLECULES (2020)

Review Chemistry, Analytical

A comprehensive look at solid-phase microextraction technique: A review of reviews

Vahid Jalili et al.

MICROCHEMICAL JOURNAL (2020)

Article Chemistry, Analytical

A molecularly imprinted whatman paper for clinical detection of propranolol

Yeliz Akbulut et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Biochemical Research Methods

Facile preparation of carbon nanotube-based molecularly imprinted monolithic stirred unit

Beatriz Fresco-Cala et al.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2020)

Review Biochemical Research Methods

Bioanalytical Applications of Microextraction Techniques: A Review of Reviews

Vahid Jalili et al.

CHROMATOGRAPHIA (2020)

Article Engineering, Environmental

Chiral molecularly imprinted polymeric stir bar sorptive extraction for naproxen enantiomer detection in PPCPs

Yujian Liu et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Review Biochemistry & Molecular Biology

Molecularly imprinted polymers-A closer look at the control polymer used in determining the imprinting effect: A mini review

Elizabeth N. Ndunda

JOURNAL OF MOLECULAR RECOGNITION (2020)

Review Chemistry, Analytical

Recent advances in stir-bar sorptive extraction: Coatings, technical improvements, and applications

Chowdhury K. Hasan et al.

ANALYTICA CHIMICA ACTA (2020)

Article Spectroscopy

Design of a pseudo stir bar sorptive extraction using graphenized pencil lead as the base of the molecularly imprinted polymer for extraction of nabumetone

Roya Afsharipour et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2020)

Review Chemistry, Analytical

Two decades of stir bar sorptive extraction: A retrospective and future outlook

Frank David et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2019)

Review Chemistry, Analytical

Thin film microextraction: Towards faster and more sensitive microextraction

Yekta Arya Olcer et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2019)

Review Biochemistry & Molecular Biology

Recent Applications of Molecularly Imprinted Sol-Gel Methodology in Sample Preparation

Mohammad Mahdi Moein et al.

MOLECULES (2019)

Review Chemistry, Analytical

Molecularly imprinted polymers-based microextraction techniques

E. Turiel et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2019)

Article Biochemical Research Methods

Paper Spray Tandem Mass Spectrometry Based on Molecularly Imprinted Polymer Substrate for Cocaine Analysis in Oral Fluid

Ludmyla S. Tavares et al.

JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY (2018)

Article Biochemical Research Methods

Determination of semicarbazide in fish by molecularly imprinted stir bar sorptive extraction coupled with high performance liquid chromatography

Tang Tang et al.

JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES (2018)

Article Chemistry, Multidisciplinary

SPECTROPHOTOMETRIC DETERMINATION OF FOUR NAPHTHALENE SULFONATES IN SEAWATER AFTER THEIR MOLECULARLY IMPRINTED STIR BAR SORPTIVE EXTRACTION

Sayyed Hossein Hashemi et al.

JOURNAL OF THE CHILEAN CHEMICAL SOCIETY (2018)

Review Chemistry, Analytical

Advances in Solid Phase Microextraction and Perspective on Future Directions

Nathaly Reyes-Garces et al.

ANALYTICAL CHEMISTRY (2018)

Article Biochemical Research Methods

Molecularly imprinted polymers for bioanalytical sample preparation

Mariana Roberto Gama et al.

JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES (2017)

Article Chemistry, Multidisciplinary

Preparation of molecularly imprinted polymers on the surface of optical fiber for HS-solid-phase microextraction of phenol

Hamid Hashemi-Moghaddam et al.

SEPARATION SCIENCE AND TECHNOLOGY (2017)

Article Biochemical Research Methods

Preparation of polysulfone materials on nickel foam for solid-phase microextraction of floxacin in water and biological samples

Xiujuan Guan et al.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2017)

Article Chemistry, Analytical

Study on the Diffusion-Dominated Solid-Phase Microextraction Kinetics in Semisolid Sample Matrix

Jianqiao Xu et al.

ANALYTICAL CHEMISTRY (2016)

Review Chemistry, Multidisciplinary

Molecular imprinting: perspectives and applications

Lingxin Chen et al.

CHEMICAL SOCIETY REVIEWS (2016)

Article Biochemical Research Methods

Water compatible stir-bar devices imprinted with underivatised glyphosate for selective sample clean-up

Alberto Gomez-Caballero et al.

JOURNAL OF CHROMATOGRAPHY A (2016)

Article Chemistry, Physical

Development and application of novel clonazepam molecularly imprinted coatings for stir bar sorptive extraction

Xiaoxu Li et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2016)

Review Chemistry, Analytical

Solid-phase microextraction-based sol-gel technique

Amirhassan Amiri

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2016)

Article Chemistry, Physical

Determination of melamine in powdered milk by molecularly imprinted stir bar sorptive extraction coupled with HPLC

Ling Zhu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)

Review Chemistry, Analytical

Application of molecularly-imprinted polymers in solid-phase microextraction techniques

Ali Sarafraz-Yazdi et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2015)

Review Chemistry, Multidisciplinary

Controlling morphology and porosity to improve performance of molecularly imprinted sol-gel silica

Jennifer E. Lofgreen et al.

CHEMICAL SOCIETY REVIEWS (2014)

Article Biochemistry & Molecular Biology

Development of Molecularly Imprinted Polymer in Porous Film Format for Binding of Phenol and Alkylphenols from Water

Andriy O. Gryshchenko et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2014)

Review Polymer Science

Recent Advances in Molecularly Imprinted Polymers in Food Analysis

Xingliang Song et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

Article Chemistry, Analytical

Preparation of a stir bar coated with molecularly imprinted polymer and its application in analysis of dopamine in urine

Yun Lei et al.

JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2014)

Article Chemistry, Analytical

Surface imprinted thin polymer film systems with selective recognition for bovine serum albumin

David R. Kryscio et al.

ANALYTICA CHIMICA ACTA (2012)

Article Chemistry, Analytical

Thin-film microextraction offers another geometry for solid-phase microextraction

Ruifen Jiang et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2012)

Review Chemistry, Multidisciplinary

Recent advances in molecular imprinting technology: current status, challenges and highlighted applications

Lingxin Chen et al.

CHEMICAL SOCIETY REVIEWS (2011)

Review Chemistry, Analytical

A critical review in calibration methods for solid-phase microextraction

Gangfeng Ouyang et al.

ANALYTICA CHIMICA ACTA (2008)

Article Chemistry, Analytical

Molecularly imprinted polymeric fibers for solid-phase microextraction

E. Turiel et al.

ANALYTICAL CHEMISTRY (2007)

Article Biochemical Research Methods

Films coated with molecular imprinted polymers for the selective stir bar sorption extraction of monocrotophos

Xiaolan Zhu et al.

JOURNAL OF CHROMATOGRAPHY A (2006)

Review Biochemistry & Molecular Biology

Characteristic and synthetic approach of molecularly imprinted polymer

Hongyuan Yan et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2006)

Review Biochemistry & Molecular Biology

Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003

C Alexander et al.

JOURNAL OF MOLECULAR RECOGNITION (2006)

Review Pharmacology & Pharmacy

Optimization, evaluation, and characterization of molecularly imprinted polymers

DA Spivak

ADVANCED DRUG DELIVERY REVIEWS (2005)

Review Biochemical Research Methods

Characterization of the heterogeneous binding site affinity distributions in molecularly imprinted polymers

RJ Umpleby et al.

JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES (2004)

Article Chemistry, Analytical

Thin-film microextraction

I Bruheim et al.

ANALYTICAL CHEMISTRY (2003)

Article Chemistry, Analytical

Characterization of molecularly imprinted polymers with the Langmuir-Freundlich isotherm

RJ Umpleby et al.

ANALYTICAL CHEMISTRY (2001)

Article Chemistry, Analytical

Fibers coated with molecularly imprinted polymers for solid-phase microextraction

EHM Koster et al.

ANALYTICAL CHEMISTRY (2001)

Review Biochemical Research Methods

Membrane-based techniques for sample enrichment

JÅ Jönsson et al.

JOURNAL OF CHROMATOGRAPHY A (2000)

Review Biochemical Research Methods

Evolution of solid-phase microextraction technology

H Lord et al.

JOURNAL OF CHROMATOGRAPHY A (2000)