☆ 4.7 Article

Ballistic impact responses and failure mechanism of composite double-arrow auxetic structure

THIN-WALLED STRUCTURES (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

Jie Mei et al.

Summary: In order to enhance the energy absorption capacity, foam filled composite X-core sandwich panels were fabricated and their bending behaviors were investigated. Analytical and finite element models were developed to predict the performance of the sandwich structures, with higher accuracy achieved by the numerical models.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

Fabrication and compression properties of continuous carbon fiber reinforced polyether ether ketone thermoplastic composite sandwich structures with lattice cores

Jiqiang Hu et al.

Summary: This study investigated a three-dimensional lightweight and high-strength sandwich structure with lattice cores, fabricated using continuous carbon fiber reinforced thermoplastic polyether ether ketone, exhibiting competitive compression strength performance.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

Add to Collection

Article Mechanics

Insight into the negative Poisson's ratio effect of the gradient auxetic reentrant honeycombs

Yujie Shao et al.

Summary: The compressive properties and energy dissipation characteristics of positive gradient auxetic honeycomb (PGAH) and negative gradient auxetic honeycomb (NGAH) were investigated, with NGAH showing superior energy dissipation. This suggests that NGAH is an ideal energy-absorbing structure.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

On the inclined static loading of honeycomb re-entrant auxetics

Rahul Singh Dhari et al.

Summary: This study reveals the micro deformation mechanisms of the reentrant honeycomb structure under inclined loading, showing a transition stage that delays reaching peak energy efficiency, and demonstrates that the performance of the RH structure does not deteriorate under inclined cases.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core

Xuan Zhao et al.

Summary: The study focuses on the bending response and energy absorption of the star-triangular honeycomb core (STH-C) and sandwich beam with an STH-C (STH-SW), showing that structural parameters significantly influence the load-bearing capacity of the sandwich beams, especially the thickness-to-length ratio t/l.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

New concept of carbon fiber reinforced composite 3D auxetic lattice structures based on stretching-dominated cells

Ying Gao et al.

Summary: This paper introduces a new concept of 3D auxetic lattice structures with high stiffness and explores a method for rapidly fabricating them. Theoretical models are developed to predict the homogenized elastic properties of the structures, and the directional dependence of these properties is investigated in detail. Experimental and numerical analysis confirm that the structures are suitable for uniaxial loading and exhibit excellent load bearing capacity and negative Poisson's ratio effects. Efforts to promote the wider use of these structures in various applications are emphasized.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Engineering, Marine

Investigation on the shear behaviors of carbon fiber composite sandwich panels with the X-core

Jie Mei et al.

Summary: The in-plane shear response of an all-composite X-core sandwich panel was investigated through experimental, numerical, and analytical methods in this study. The findings revealed the dominant failure mode of delamination on the joint and web, and the numerical models accurately simulated the initiation and extension of delamination, showing good agreement with experimental results. The theoretical model based on Reddy zig-zag laminated beams theory and spring model for the joint successfully forecasted the shear mechanical properties, with analytical results showing significant effects of member shear deformation and joint stiffness on the shear modulus and reasonable agreement with experiments.

MARINE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Elastic and failure characteristics of additive manufactured thin wall lattice structures with defects

Yan Wu et al.

Summary: This study analyzed the effects of material defects on the elastic and fracture characteristics of lattice structures, finding that material property variabilities reduce initial fracture strength, increase retaining strength, and lead to unexpected fracture patterns. Auxetic and diamond structures exhibit different sensitivities to material property variabilities, which has various implications for their potential applications.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

A multiscale model for the prediction of ballistic performance of fiber-reinforced composites

Wenqing Zhu et al.

Summary: This study delves into the effects of microscale constituent dimensions and properties on the impact performance of macroscopic fiber-reinforced laminates. A numerical algorithm incorporating the dynamic shear-lag model is developed, revealing a linear relationship between dimensionless viscosity and impulse duration for optimal energy dissipation. A new multiscale model is established to consider the contribution of the matrix to energy absorption, successfully capturing the impact of matrix properties on the ballistic limits of aramid fiber and carbon fiber composites.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Low-velocity impact resistance of composite sandwich panels with various types of auxetic and non-auxetic core structures

Fatih Usta et al.

Summary: The study found that non-auxetic cores may have advantages over auxetic cores at small deformations, but auxetic cores provide greater impact resistance as the impact energy increases. Arrowhead and hexachiral structures perform well in applications involving impacts under large deformations.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

length Investigating ballistic resistance of CFRP/polyurea composite plates subjected to ballistic impact

Qiang Liu et al.

Summary: Polyurea coating has been used to enhance the protective performance of multi-layered composite structures under blast or impact loading, especially showing significant improvement in the ballistic resistance of Carbon Fiber Reinforced Plastics (CFRP) composites.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Damping mechanisms of CFRP three-dimensional double-arrow-head auxetic metamaterials

Yun-Long Chen et al.

POLYMER TESTING (2020)

Add to Collection

Article Mechanics

Geometrically nonlinear mechanical properties of auxetic double-V microstructures with negative Poisson's ratio

Qiang Gao et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)

Add to Collection

Article Engineering, Mechanical

Experimentally program large magnitude of Poisson's ratio in additively manufactured mechanical metamaterials

Bin Ling et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Civil

Design and analysis of 2D double-U auxetic honeycombs

Meng-Fu Guo et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Mechanics

Novel panel-core connection process and impact behaviors of CF/PEEK thermoplastic composite sandwich structures with truss cores

Jiqiang Hu et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Materials Science, Composites

Impulsive response of composite sandwich structure with tetrahedral truss core

Wei Huang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Mechanics

Mechanical properties and failure behavior of the sandwich structures with carbon fiber-reinforced X-type lattice truss core

Bing Wang et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Modal characteristics and damping enhancement of carbon fiber composite auxetic double-arrow corrugated sandwich panels

Li Ma et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Materials Science, Composites

Broadband radar absorption and mechanical behaviors of bendable over-expanded honeycomb panels

Peng Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Composites

Investigation on manufacturing and mechanical behavior of all-composite sandwich structure with Y-shaped cores

Jialin Liu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Composites

The manufacture and characterization of composite three-dimensional re-entrant auxetic cellular structures made from carbon fiber reinforced polymer

Xin-Tao Wang et al.

JOURNAL OF COMPOSITE MATERIALS (2018)

Add to Collection

Article Mechanics

Ballistic analysis of fiber metal laminates impacted by flat and conical impactors

Hamed Zarei et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Engineering, Manufacturing

The effect of temperature on the bending properties and failure mechanism of composite truss core sandwich structures

Jiayi Liu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Engineering, Manufacturing

Experimental analysis of normal and oblique high velocity impacts on carbon/epoxy tape laminates

J. Pernas-Sanchez et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Add to Collection

Article Engineering, Mechanical

Energy absorption and ballistic limit of nanocomposite laminates subjected to impact loading

G. Balaganesan et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Ballistic resistance of spaced multi-layer plate structures: Experiments on Fibre Reinforced Plastic targets and an analytical framework for calculating the ballistic limit

Euan Wielewski et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical behavior of carbon fiber composite lattice core sandwich panels fabricated by laser cutting

J. Xiong et al.

ACTA MATERIALIA (2012)

Add to Collection

Article Engineering, Multidisciplinary

An analytical model for composite sandwich panels with honeycomb core subjected to high-velocity impact

S. Feli et al.

COMPOSITES PART B-ENGINEERING (2012)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical approaches for estimating ballistic limit velocities of woven composite beams

Ercan Sevkat

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

Add to Collection

Article Mechanics

Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures

Jian Xiong et al.

COMPOSITE STRUCTURES (2010)

Add to Collection

Article Materials Science, Composites

The high velocity impact response of composite and FML-reinforced sandwich structures

GR Villanueva et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

Add to Collection

Article Mechanics

A study of negative Poisson's ratios in auxetic honeycombs based on a large deflection model

H Wan et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.