4.7 Article

Uniform deposition of silicon oxide film on cylindrical substrate by radially arranged plasma jet array

Related references

Note: Only part of the references are listed.
Article Physics, Applied

Long-lived species in plasma-activated water generated by an AC multi-needle-to-water discharge: effects of gas flow on chemical reactions

Kun Liu et al.

Summary: This study investigates the effects of gas flow on the concentration of nitrogen oxides and H2O2 in plasma-activated water. It was found that higher gas flow rates result in increased H2O2 concentration, while nitrogen oxides increase with prolonged plasma-processing time. The research highlights the importance of controlling gas flow to tune the concentrations of species in plasma-activated water, potentially favoring the generation of ONOOH.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

Article Engineering, Electrical & Electronic

SF6 Partial Discharge Decomposition Characteristics Under Different Lengths of Wire-Type Metal Particles in Direct Current Gas Insulated Equipment

Gang Wei et al.

Summary: The experimental results show that the length of wire-type free metal particles is proportional to the amount of SF6 DC PD characteristic decomposition components. Longer wire-type free metal particles increase the intensity of PD and the generation rates of SF6 DC PD characteristic decomposition components.

JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (2021)

Article Physics, Applied

Influence of double bonds and cyclic structure on the AP-PECVD of low-k organosilicon insulating layers

Dominique Abessolo Ondo et al.

Summary: The study reveals that the structure of the monomer affects the growth mechanisms and performance of thin films prepared from different tetrasiloxane compounds. The presence of vinyl bonds enables free-radical polymerization and surface reaction pathways, leading to the formation of atomically smooth thin films with excellent insulating properties under specific plasma conditions.

PLASMA PROCESSES AND POLYMERS (2021)

Article Materials Science, Coatings & Films

Etching and annealing treatment to improve the plasma-deposited SiOx film adhesion force

Ruixue Wang et al.

Summary: In this study, an atmospheric pressure plasma jet was used to deposit SiOx film on a metal surface, and plasma etching and annealing were applied to improve adhesion strength. The results showed that the adhesion strength of the film after plasma treatment was significantly higher than that of the untreated group, attributed to the increased oxygen content and composition changes in the film. Additionally, the lift-off voltage results in the gas-insulated line system also demonstrated an improvement after the annealing process.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Interplay between cracking and delamination in incrementally deposited plasma sprayed coatings

Shalaka Shinde et al.

Summary: This study focuses on defining the interplay between cracking and delamination in progressively deposited plasma sprayed coatings, providing experimental data and an analytical design map, enabling a framework for the robust design and processing of advanced coatings.

ACTA MATERIALIA (2021)

Article Nanoscience & Nanotechnology

Open-Air Plasma-Deposited Multilayer Thin-Film Moisture Barriers

Oliver Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Electrical & Electronic

A novel nonlinear conductive ZnO micro-varistor/epoxy resin composite film for metallic particle deactivation in DC GIL

Qianqiu Shao et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2020)

Article Materials Science, Composites

Development of polymer film coatings with high adhesion to steel alloys and high wear resistance

Alexei Yumashev et al.

POLYMER COMPOSITES (2020)

Review Engineering, Chemical

Thin film deposition techniques for polymeric membranes- A review

Musthafa O. Mavukkandy et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Article Engineering, Chemical

Spatial-Temporal Evolution of a Radial Plasma Jet Array and Its Interaction with Material

Ruixue Wang et al.

PLASMA CHEMISTRY AND PLASMA PROCESSING (2019)

Article Materials Science, Coatings & Films

Surface and protein adsorption properties of 316L stainless steel modified by polyvinyl alcohol and plasma-treated polyvinyl alcohol films

Shih-Hang Chang et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

The Effects of Carburization on the Fatigue Crack Growth Behaviors of Local Surface Cracks in Cylindrical Bars

Feng-peng Yang et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

Article Materials Science, Coatings & Films

Barrier and mechanical properties of carbon steel coated with SiOx/SiOxCyHz, gradual films prepared by PECVD

Rita C. C. Rangel et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Physics, Applied

Effect of dielectric and conductive targets on plasma jet behaviour and thin film properties

Ruixue Wang et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2019)

Review Materials Science, Multidisciplinary

Overview of thin film deposition techniques

Olayinka Oluwatosin Abegunde et al.

AIMS MATERIALS SCIENCE (2019)

Article Materials Science, Multidisciplinary

Fabrication and corrosion resistance of a graphene-tin oxide composite film on aluminium alloy 6061

Linghui Yang et al.

CORROSION SCIENCE (2018)

Article Materials Science, Multidisciplinary

Atmospheric-pressure plasma-enhanced chemical vapor deposition of UV-shielding TiO2 coatings on transparent plastics

Hiroki Nagasawa et al.

MATERIALS LETTERS (2018)

Article Materials Science, Multidisciplinary

Improving surface hydrophobicity of glass using an atmospheric pressure plasma jet array in Ar/TMS

Xinglei Cui et al.

VACUUM (2018)

Article Engineering, Electrical & Electronic

Technical Aspects of Gas Insulated Transmission Lines and Application of New Insulating Gases

Hermann Koch et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2018)

Article Nanoscience & Nanotechnology

Effects of Ar Addition to O-2 Plasma on Plasma-Enhanced Atomic Layer Deposition of Oxide Thin Films

Hanearl Jung et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Coatings & Films

Hydrophobic surface modification of polymethyl methacrylate by two-dimensional plasma jet array at atmospheric pressure

Feng Liu et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2018)

Article Physics, Fluids & Plasmas

Plasma jet array treatment to improve the hydrophobicity of contaminated HTV silicone rubber

Ruobing Zhang et al.

PLASMA SCIENCE & TECHNOLOGY (2017)

Article Engineering, Electrical & Electronic

Low temperature atmospheric microplasma jet array for uniform treatment of polymer surface for flexible electronics

Tao Wang et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)

Article Nanoscience & Nanotechnology

CO2 Plasma-Treated TiO2 Film as an Effective Electron Transport Layer for High-Performance Planar Perovskite Solar Cells

Kang Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Physics, Fluids & Plasmas

Two discharge modes in an atmospheric pressure plasma jet array in argon

Zhi Fang et al.

PLASMA SOURCES SCIENCE & TECHNOLOGY (2016)

Article Engineering, Mechanical

Studies on failure behaviour of wire rope used in underground coal mines

R. P. Singh et al.

ENGINEERING FAILURE ANALYSIS (2016)

Article Engineering, Electrical & Electronic

Hydrophobic surface modification of epoxy resin using an atmospheric pressure plasma jet array

Zhi Fang et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2016)

Article Physics, Condensed Matter

Characterization of diamond-like carbon thin film synthesized by RF atmospheric pressure plasma Ar/CH4 jet

Farshad Sohbatzadeh et al.

SUPERLATTICES AND MICROSTRUCTURES (2016)

Article Materials Science, Coatings & Films

Tetrakis(trimethylsilyloxy)silane for nanostructured SiO2-like films deposited by PECVD at atmospheric pressure

J. Schaefer et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Article Materials Science, Coatings & Films

Deposition, heat treatment and characterization of two layer bioactive coatings on cylindrical PEEK

John W. Durham et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Review Polymer Science

A Review of Natural Fibers Used in Biocomposites: Plant, Animal and Regenerated Cellulose Fibers

Sunil Kumar Ramamoorthy et al.

POLYMER REVIEWS (2015)

Review Materials Science, Coatings & Films

Atmospheric-pressure low-temperature plasma processes for thin film deposition

Hiroaki Kakiuchi et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2014)

Article Physics, Fluids & Plasmas

Discharge Characteristics of a Cold-Atmospheric-Plasma Jet Array Generated With Single-Electrode Configuration

Qian-Qian Fan et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2012)

Article Engineering, Chemical

The Application of Nano-SiOx Coatings as Migration Resistance Layer by Plasma Enhanced Chemical Vapor Deposition

Fei Fei et al.

PLASMA CHEMISTRY AND PLASMA PROCESSING (2012)

Article Physics, Applied

Intense and Energetic Atmospheric Pressure Plasma Jet Arrays

Jae Young Kim et al.

PLASMA PROCESSES AND POLYMERS (2012)

Article Physics, Fluids & Plasmas

Intense Plasma Emission From Atmospheric-Pressure Plasma Jet Array by Jet-to-Jet Coupling

Jae Young Kim et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2011)

Article Materials Science, Coatings & Films

Microstructures of SiO2 and TiOX films deposited by atmospheric pressure inductively coupled micro-plasma jet

Tadahiro Aita et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Article Optics

Optical emission spectroscopy of Ar-N2 mixture plasma

A. Qayyum et al.

JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2007)

Article Physics, Applied

Higher-k LaYOx films with strong moisture resistance

Yi Zhao et al.

APPLIED PHYSICS LETTERS (2006)

Article Materials Science, Coatings & Films

Deposition of SiOx diffusion barriers on flexible packaging materials by PECVD

A Bieder et al.

SURFACE & COATINGS TECHNOLOGY (2005)

Article Materials Science, Multidisciplinary

Residual stress in plasma sprayed zirconia on cylindrical components

P Fogarassy et al.

MECHANICS OF MATERIALS (2003)