Related references
Note: Only part of the references are listed.Microstructures and mechanical properties of a cast Al-Cu-Li alloy during heat treatment procedure
Shu-Wei Duan et al.
RARE METALS (2021)
Crystallization-dependent transition of corrosion resistance of an Fe-based bulk metallic glass under hydrostatic pressures
Zhen Gan et al.
CORROSION SCIENCE (2021)
Microhardness, wear resistance, and corrosion resistance of AlxCrFeCoNiCu high-entropy alloy coatings on aluminum by laser cladding
Yanzhou Li et al.
OPTICS AND LASER TECHNOLOGY (2021)
Interfacial bonding mechanism and properties of HVOF-sprayed Fe-based amorphous coatings on LA141 magnesium alloy substrate
Y. J. Sun et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Interfacial characteristic and microstructure of Fe-based amorphous coating on magnesium alloy
Haoran Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Nanosecond-Pulse Laser Assisted Cold Spraying of Al-Cu Aluminum Alloy
Chen Zhang et al.
COATINGS (2021)
Corrosion behavior and characteristics of passive films of laser powder bed fusion produced Ti-6Al-4V in dynamic Hank's solution
Liang-Yu Chen et al.
MATERIALS & DESIGN (2021)
Numerical simulation of heat transfer and fluid flow during nanosecond pulsed laser processing of Fe78Si9B13 amorphous alloys
Lingyu Guo et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
The crystallographic corrosion and its microstructure in an Al-Cu-Li alloy
Jiaying Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Corrosion inhibition characteristics of multilayer Si-DLC, phosphating and anodizing coatings deposited on 2024 Al alloy: A comparative study
Saad M. Fayed et al.
DIAMOND AND RELATED MATERIALS (2021)
Sealing of anodized AA2099-T83 Al-Cu-Li alloy with layered double hydroxides for high corrosion resistance at reduced anodic film thickness
P. Zhu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Microstructure and corrosion resistance of Fe-based amorphous coating prepared by detonation spray
Shuai Cui et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Investigation of nano- and micro-scale structural evolution and resulting corrosion resistance in plasma sprayed Fe-based (Fe-Cr-B-C-P) amorphous coatings
Anil Kumar et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Surface characteristics of Ni-Fe-Cr-Nb-Al-Ti coatings by supersonic particle deposition and laser remelting on AlSi12Cu alloy
Han Bingyuan et al.
OPTICS AND LASER TECHNOLOGY (2020)
Influence of the high-velocity oxygen-fuel spray parameters on the porosity and corrosion resistance of iron-based amorphous coatings
Lei Qiao et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Duplex and functionally graded Al@NiCr/8YSZ thermal barrier coatings on aluminum substrates
Panpan Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Bonding and wear behaviors of supersonic plasma sprayed Fe-based coatings on Al-Si alloy substrate
Qiang Wang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Role of passive film in dominating the electrochemical corrosion behavior of FeCrMoCBY amorphous coating
Miqi Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: A review
Bo Huang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Electrochemical polymerization of polyaniline-reduced graphene oxide composite coating on 5083 Al alloy: Role of reduced graphene oxide
Suyun Liu et al.
ELECTROCHEMISTRY COMMUNICATIONS (2019)
Fe-based bulk metallic glasses: Glass formation, fabrication, properties and applications
H. X. Li et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Characterization of ZrN coating low-temperature deposited on the preliminary Ar+ ions treated 2024 Al-alloy
M. A. Vasylyev et al.
SURFACE & COATINGS TECHNOLOGY (2019)
The effect of surface pretreatment on the corrosion behaviour of silanated AA2198-T851 Al-Cu-Li alloy
Uyime Donatus et al.
SURFACE AND INTERFACE ANALYSIS (2019)
Investigation on adhesion strength and corrosion resistance of Ti-Zr aminotrimethylene phosphonic acid composite conversion coating on 7A52 aluminum alloy
Qi Liu et al.
APPLIED SURFACE SCIENCE (2018)
Effect of spraying parameter and injector angle on the properties of in-flight particles and alumina coatings on Al alloy with PA-HT
Guoliang Hou et al.
CERAMICS INTERNATIONAL (2018)
Effect of hydrostatic pressure on the corrosion behavior of HVOF-sprayed Fe-based amorphous coating
Cheng Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Direct current micro-arc oxidation coatings on Al-Zn-Mg-Mn-Zr extruded alloy with tunable structures and properties templated by discharge stages
Zequan Zhao et al.
VACUUM (2018)
Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review
Ali Abd El-Aty et al.
JOURNAL OF ADVANCED RESEARCH (2018)
Solidification mechanism and quantitative characterization of Fe-based amorphous splat formed by plasma sprayed droplets with different in-flight status
Shu-ying Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Synthesis of the Ni-Al coatings on different metallic substrates by mechanical alloying and subsequent laser treatment
V. Yu. Zadorozhnyy et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Enhanced corrosion property of W-Al coatings fabricated on aluminum using surface alloying under high-current pulsed electron beam
Conglin Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Critical review on the passive film formation and breakdown on iron electrode and the models for the mechanisms underlying passivity
Angathevar Veluchamy et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2017)
Adhesion, tribological and corrosion properties of cold-sprayed CoCrMo and Ti6A14V coatings on 6061-T651 Al alloy
Wen Sun et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Improving interfacial, mechanical and tribological properties of alumina coatings on Al alloy by plasma arc heat-treatment of substrate
Guoliang Hou et al.
APPLIED SURFACE SCIENCE (2017)
Self-healing Li-Al layered double hydroxide conversion coating modified with aspartic acid for 6N01 Al alloy
Caixia Zhang et al.
APPLIED SURFACE SCIENCE (2017)
Corrosion resistance of Fe-Cr-based amorphous alloys: An overview
C. A. C. Souza et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)
Tribocorrosion Behavior of Fe-Based Amorphous Composite Coating Reinforced by Al2O3 in 3.5% NaCl Solution
Muhammad Yasir et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Spraying of Fe-based amorphous coating with high corrosion resistance by HVAF
Gang Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Fe-based amorphous coating for corrosion protection of magnesium alloy
S. F. Guo et al.
MATERIALS & DESIGN (2016)
Fabrication and characterization of Fe-based amorphous coatings prepared by high-velocity arc spraying
Wenmin Guo et al.
MATERIALS & DESIGN (2015)
Specific heat capacities of Fe-Co-Cr-Mo-C-B-Y bulk metallic glasses and their correlation with glass-forming ability
Yunzhuo Lu et al.
MATERIALS LETTERS (2015)
Effects of different surface cleaning procedures on the superficial morphology and the adhesive strength of epoxy coating on aluminium alloy 1050
S. Sharifi Golru et al.
PROGRESS IN ORGANIC COATINGS (2015)
Improving the properties of 211Z Al alloy by enhanced electroless Ni-P-TiO2 nanocomposite coatings with TiO2 sol
Xiaoyan Wu et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Effect of the thickness of cold sprayed aluminium alloy coating on the adhesive bond strength with an aluminium alloy substrate
Yuming Xiong et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Crystallization, phase evolution and corrosion of Fe-based metallic glasses: An atomic-scale structural and chemical characterization study
M. J. Duarte et al.
ACTA MATERIALIA (2014)
Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance
Cheng Zhang et al.
ACTA MATERIALIA (2014)
Effect of applied potential on passivation and erosion-corrosion of a Fe-based amorphous metallic coating under slurry impingement
Z. B. Zheng et al.
CORROSION SCIENCE (2014)
Homogenization heat treatment of 2099 Al-Li alloy
Fei Zhang et al.
RARE METALS (2014)
Erosion-corrosion of HVOF-sprayed Fe-based amorphous metallic coating under impingement by a sand-containing NaCl solution
Z. B. Zheng et al.
CORROSION SCIENCE (2013)
New findings on properties of plasma electrolytic oxidation coatings from study of an Al-Cu-Li alloy
Ying-liang Cheng et al.
ELECTROCHIMICA ACTA (2013)
Preparation and electrochemical properties of Cr(III)-Ti-based coatings on 6063 Al alloy
Hui Cheng Yu et al.
SURFACE & COATINGS TECHNOLOGY (2013)
On the bonding strength in thermally sprayed Fe-based amorphous coatings
Y. Peng et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Pitting initiation in Fe-based amorphous coatings
C. Zhang et al.
ACTA MATERIALIA (2012)
Effects of crystallization on the corrosion resistance of Fe-based amorphous coatings
Y. Yang et al.
CORROSION SCIENCE (2012)
Influence of ceramic thickness on residual stress and bonding strength for plasma sprayed duplex thermal barrier coating on aluminum alloy
Lijian Gu et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Oxidation and crystallization mechanisms in plasma-sprayed Cu-based bulk metallic glass coatings
Junghwan Kim et al.
ACTA MATERIALIA (2010)
High performance amorphous steel coating prepared by HVOF thermal spraying
H. S. Ni et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effective corrosion protection of 8090 alloy by cerium conversion coatings
A. Conde et al.
ELECTROCHIMICA ACTA (2008)
Knowledge concerning splat formation: An invited review
P Fauchais et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2004)
Share Paper
