Related references
Note: Only part of the references are listed.Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants
Adnan Ibrahim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)
Investigating corrosion behavior of Ni and Ni-20Cr in molten ZnCl2
Simerjeet K. Gill et al.
CORROSION SCIENCE (2021)
Ni-Mo-Cr alloy corrosion in molten NaCl-KCl-MgCl2 salt and vapour
Qi Liu et al.
CORROSION SCIENCE (2021)
Microstructural influence of sigma phase on pitting corrosion behavior of duplex stainless steel/NaCl electrolyte couple
David D. S. Silva et al.
MATERIALS CHEMISTRY AND PHYSICS (2021)
On the compositional and structural redistribution during partial recrystallisation: a case of σ-phase precipitation in a Mo-doped NiCoCr medium-entropy alloy
Junyang He et al.
SCRIPTA MATERIALIA (2021)
Progress in Research and Development of Molten Chloride Salt Technology for Next Generation Concentrated Solar Power Plants
Wenjin Ding et al.
ENGINEERING (2021)
Corrosion behavior of boronized nickel-based alloys in the molten chloride Salt
Brendan D'Souza et al.
CORROSION SCIENCE (2021)
First steps toward predicting corrosion behavior of structural materials in molten salts
R. Pillai et al.
JOURNAL OF NUCLEAR MATERIALS (2021)
Molten chloride salts for high-temperature thermal energy storage: Continuous electrolytic salt purification with two Mg-electrodes and alternating voltage for corrosion control
Wenjin Ding et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)
Impurity driven corrosion behavior of HAYNES® 230® alloy in molten chloride Salt
Brendan D'Souza et al.
CORROSION SCIENCE (2021)
Effects of post heat treatment on the microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy
Zhijun Qiu et al.
MATERIALS CHARACTERIZATION (2021)
Assessment of effects of Mg treatment on corrosivity of molten NaCl-KClMgCl2 salt with Raman and Infrared spectra
Hua Sun et al.
CORROSION SCIENCE (2020)
Influence of the production method on the thermophysical properties of high temperature molten salt-based nanofluids
Nuria Navarrete et al.
JOURNAL OF MOLECULAR LIQUIDS (2020)
Thermal properties characterization of chloride salts/nanoparticles composite phase change material for high-temperature thermal energy storage
Dongmei Han et al.
APPLIED ENERGY (2020)
Study on preparation and thermal properties of mixed chloride salts
Quanying Yan et al.
THERMOCHIMICA ACTA (2020)
Thermo-physical properties and corrosivity improvement of molten salts by use of nanoparticles for concentrated solar power applications: A critical review
Hatem Ahmad Aljaerani et al.
JOURNAL OF MOLECULAR LIQUIDS (2020)
Potential scalability of a cost-effective purification method for MgCl2-Containing salts for next-generation concentrating solar power technologies
Youyang Zhao et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)
Corrosion mechanisms of ferritic-martensitic P91 steel and Inconel 600 nickel-based alloy in molten chlorides. Part II: NaCl-KCl-MgCl2 ternary system
B. Gregoire et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)
Corrosion mechanisms of ferritic-martensitic P91 steel and Inconel 600 nickel-based alloy in molten chlorides. Part I: NaCl-KC1 binary system
B. Gregoire et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)
Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds
L. H. Guilherme et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Fracture of sigma phase containing Co-Cr-Ni-Mo medium entropy alloys
D. H. Chung et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Hot corrosion behavior of super alloys
Gaurav Prashar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Molten chloride salts for next generation concentrated solar power plants: Mitigation strategies against corrosion of structural materials
Wenjin Ding et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Sensible energy storage options for concentrating solar power plants operating above 600 °C
Gowtham Mohan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Hot corrosion of different alloys in chloride and carbonate molten-salt mixtures under argon atmosphere
Xiaoru Zhuang et al.
SOLAR ENERGY (2019)
Molten chloride salts for next generation CSP plants: Electrolytical salt purification for reducing corrosive impurity level
Wenjin Ding et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
The dehydration of MgCl2•6H2O by inhibition of hydrolysis and conversion of hydrolysate
Zhimin Zhang et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2019)
Molten salt thermal conductivity enhancement by mixing nanoparticles
Yoshitaka Ueki et al.
FUSION ENGINEERING AND DESIGN (2018)
Influence of Si on sigma phase precipitation and pitting corrosion in superaustenitic stainless steel weld metal
Changmin Lee et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Basic properties of eutectic chloride salts NaCl-KCl-ZnCl2 and NaCl-KCl-MgCl2 as HTFs and thermal storage media measured using simultaneous DSC-TGA
Xiankun Xu et al.
SOLAR ENERGY (2018)
Corrosion behavior of 316SS and Ni-based alloys in a ternary NaCl-KCl-MgCl2 molten salt
Hua Sun et al.
SOLAR ENERGY (2018)
Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl2/KCl/NaCl under inert atmosphere
Wenjin Ding et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Effects of alloying elements on the corrosion behavior of Ni-based alloys in molten NaCl-KCl-MgCl(2 )salt at different temperatures
Hua Sun et al.
CORROSION SCIENCE (2018)
Minimum system entropy production as the FOM of high temperature heat transfer fluids for CSP systems
Ye Zhang et al.
SOLAR ENERGY (2017)
Corrosion behavior of Ni-based alloys in molten NaCl-CaCl2-MgCl2 eutectic salt for concentrating solar power
Bo Liu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Corrosion behavior of nickel-based superalloys in thermal storage medium of molten eutectic NaCl-MgCl2 in atmosphere
Jun-wei Wang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Cyclic Voltammetry for Monitoring Corrosive Impurities in Molten Chlorides for Thermal Energy Storage
Wenjin Ding et al.
11TH INTERNATIONAL RENEWABLE ENERGY STORAGE CONFERENCE, IRES 2017 (2017)
Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies
Judith C. Gomez-Vidal et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Heat transfer fluids for concentrating solar power systems - A review
K. Vignarooban et al.
APPLIED ENERGY (2015)
Thermal conductivities and characteristics of ternary eutectic chloride/expanded graphite thermal energy storage composites
Heqing Tian et al.
APPLIED ENERGY (2015)
Vapor pressure and corrosivity of ternary metal-chloride molten-salt based heat transfer fluids for use in concentrating solar power systems
K. Vignarooban et al.
APPLIED ENERGY (2015)
Modeling carbide dissolution in alloy 602 CA during high temperature oxidation
A. Chyrkin et al.
CORROSION SCIENCE (2015)
Corrosion behaviour of stainless steels and a single crystal superalloy in a ternary LiCl-KCl-CsCl molten salt
M. Hofmeister et al.
CORROSION SCIENCE (2015)
A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts
Shunv Liu et al.
CORROSION SCIENCE (2014)
Thermal energy storage technologies and systems for concentrating solar power plants
Sarada Kuravi et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2013)
Thermodynamic evaluation and optimization of the (NaCl plus KCl + MgCl2 + CaCl2 + ZnCl2) system
Christian Robelin et al.
JOURNAL OF CHEMICAL THERMODYNAMICS (2011)
Preparation of anhydrous magnesium chloride from ammonium magnesium chloride hexahydrate
Hyoung-Choon Eom et al.
ADVANCED POWDER TECHNOLOGY (2010)
Corrosion behaviour of various model alloys with NaCl-KCl coating
YS Li et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Stability of protective oxide films in waste incineration environment - solubility measurement of oxides in molten chlorides
T Ishitsuka et al.
CORROSION SCIENCE (2002)
Chloridation and oxidation of iron, chromium, nickel and their alloys in chloridizing and oxidizing atmospheres at 400-700°C
A Zahs et al.
CORROSION SCIENCE (2000)
Share Paper
