Sulfonated polypropylene microparticles from waste as adsorbents for methylene blue: Kinetic, equilibrium, and thermodynamic studies

Review Polymer Science

Recent advances in dye removal from wastewater by membrane technology: a review

P. Moradihamedani

Summary: Dye contamination of wastewater is a critical environmental issue, with industrial sectors being the main sources. Various techniques are used for dye removal, and nanofiltration is the most studied membrane type.

POLYMER BULLETIN (2022)

Add to Collection

Article Polymer Science

Adsorption of methylene blue from aqueous solutions using carboxyl/nitro-functionalized microparticles derived from polypropylene waste

Ahmed Bakry et al.

Summary: This study investigated the feasibility of using waste polypropylene film to prepare functionalized polypropylene microparticles for the adsorption of methylene blue from aqueous solutions. The results showed that increasing polymer dosage, pH, and contact time improved the removal of methylene blue from water. The kinetic and equilibrium studies suggested that the adsorption process followed a chemisorption mechanism, with a maximum adsorption capacity achieved under specific temperature and pH conditions.

IRANIAN POLYMER JOURNAL (2022)

Add to Collection

Article Polymer Science

Synergistic effects of surface aminolysis and hydrolysis on improving fibroblast cell colonization within poly(L-lactide) scaffolds

Ahmed Bakry

Summary: This study proposed a method to overcome low internal cell colonization within tissue engineering scaffolds by combining modified PLLAsc and PDLLA. The results showed that the scaffolds had proper morphology, hydrophilicity, and strength. The combination of aminolyzed and hydrolyzed PLLAsc with PDLLA could result in a mechanically stable scaffold with enhanced cell colonization.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Review Environmental Sciences

A state-of-the-art review on wastewater treatment techniques: the effectiveness of adsorption method

Ruhma Rashid et al.

Summary: Water contamination from toxic pollutants like dyes, heavy metals, and surfactants has become a global challenge, leading to increasing efforts to develop effective wastewater treatment techniques. Various methods such as chemical oxidation, physical adsorption, and biological treatments have been recognized. Among these, adsorption is considered a simple, sustainable, cost-effective, and environmentally friendly technique for wastewater treatment, but further research and development are needed for practical implementation in a wide range of applications.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Acid-treated clay materials (Southwestern Tunisia) for removing sodium leuco-vat dye : Characterization, adsorption study and activation mechanism

Islem Chaari et al.

Summary: The clay deposits of El Haria formation in Gafsa basin, Tunisia were treated with sulfuric acid to enhance surface properties and dye adsorption capacity. The acid treatment resulted in increased surface area and porosity of the material, leading to improved dye adsorption performance.

JOURNAL OF MOLECULAR STRUCTURE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

A Review on Heavy Metal Ions and Containing Dyes Removal Through Graphene Oxide-Based Adsorption Strategies for Textile Wastewater Treatment

Sasireka Velusamy et al.

Summary: Textile wastewater heavy metal pollution has become a severe global environmental issue, with significant impacts on natural water resources and human health. Graphene oxide as an adsorbent exhibits advantages in efficient removal of heavy metal ions, playing a crucial role in the remediation of textile wastewater.

CHEMICAL RECORD (2021)

Add to Collection

Article Polymer Science

Fabrication of SiO2 modified biobased hydrolyzed hollow polymer particles and their applications as a removal of methyl orange dye and bisphenol-A

Saleem Raza et al.

Summary: SiO2 grafted biobased hollow polymeric particles were fabricated from biomass trans-anethole monomers, which showed high adsorption capacity towards methyl orange dye and bisphenol-A. The materials also exhibited excellent regeneration performance and have potential applications in wastewater treatment for pollutant separation.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Solid waste sub-driven acidic mesoporous activated carbon structures for efficient uranium capture through the treatment of industrial phosphoric acid

Asmaa S. Morshedy et al.

Summary: This study presents the manufacturing of bio-char from rice-straw by low-temperature pyrolysis as a new trend, and the use of activated carbons for uranium removal from phosphoric acid. Among the three structures studied, it was found that hydrochloric acid activated carbon (HAC) has the highest adsorption capacity for uranium removal. The adsorption processes of the three structures followed the pseudo-second-order model and Langmuir isotherm model, with the sorption capacity of 2.3, 2.5, and 3.3 for BC, NAC, and HAC, respectively.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2021)

Add to Collection

Article Engineering, Environmental

Assessment of sulfonation in lignocellulosic derived material for adsorption of methylene blue

Hee-Jeong Choi

Environmental Engineering Research (2021)

Add to Collection

Article Engineering, Environmental

Hybrid treatment system for real textile wastewater remediation based on coagulation/flocculation, adsorption and filtration processes: Performance and economic evaluation

Ahmad K. Badawi et al.

Summary: The research examined the feasibility of a hybrid treatment system for real textile wastewater treatment, using coagulation/flocculation, adsorption, and filtration processes. The results demonstrated enhanced removal efficiency for COD, TSS, TN, turbidity, and color, and economic evaluation confirmed the effectiveness of the system for real textile effluent remediation at a low cost.

JOURNAL OF WATER PROCESS ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Synthesis of polyamide-based nanocomposites using green-synthesized chromium and copper oxides nanoparticles for the sorption of uranium from aqueous solution

Amir A. Elzoghby et al.

Summary: The study successfully modified polyamide 6 (PA6) to synthesize CrO@PA6 and CuO@PA6 nanocomposites as novel nano-adsorbents for efficient removal of uranium (VI) from aqueous solution. Characterization by various techniques revealed that these modified nanocomposites exhibit higher adsorption capacities for U(VI) compared to unmodified PA6, along with good thermal stability.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Development of triethanolamine functionalized-anion exchange membrane for adsorptive removal of methyl orange from aqueous solution

Muhammad Imran Khan et al.

Summary: In this study, a homogeneous triethanolamine functionalized-anion exchange membrane was successfully fabricated through solution casting method, showing higher thermal stability and homogeneous morphology. The fabricated membrane was used for the adsorptive discharge of methyl orange from aqueous solution at room temperature. Results indicated that the percentage discharge of methyl orange increased with contact time, amount of the fabricated AEM (adsorbent), and temperature. The adsorption kinetics for the discharge of methyl orange onto the prepared AEM followed the pseudo-second-order kinetic model.

DESALINATION AND WATER TREATMENT (2021)

Add to Collection

Article Engineering, Environmental

Statistical modeling and mechanistic pathway for methylene blue dye removal by high surface area and mesoporous grass-based activated carbon using K2CO3 activator

Ahmed Saud Abdulhameed et al.

Summary: The study successfully utilized grass waste biomass to produce highly porous activated carbon with favorable adsorption properties for methylene blue dye removal. By optimizing key parameters, the activated carbon showed highest adsorption capacity at 45 degrees Celsius, and the Langmuir model accurately described the adsorption equilibrium data.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Core/shell PA6 @ Fe3O4 nanofibers: Magnetic and shielding behavior

Mohamed S. A. Darwish et al.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

Sulfonate-grafted conjugated microporous polymers for fast removal of cationic dyes from water

Wei Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Removal of Methylene Blue and Basic Yellow 28 Dyes from Aqueous Solutions Using Sulphonated Waste Poly Methyl Methacrylate

Nadjib Dahdouh et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

Add to Collection

Article Polymer Science

Poly(acrylic acid)/poly(acrylamide) hydrogel adsorbent for removing methylene blue

Qingyun Lv et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Chemistry, Applied

Green and facile synthesis of hierarchically porous carbon monoliths via surface self-assembly on sugarcane bagasse scaffold: Influence of mesoporosity on efficiency of dye adsorption

Ratchadaporn Kueasook et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Effective Adsorptive Removal of Methylene Blue from Water by Didodecyldimethylammonium Bromide-Modified Brown Clay

Muhammad Munir et al.

ACS OMEGA (2020)

Add to Collection

Article Chemistry, Applied

Preparation of sulfonated chitosan for enhanced adsorption of methylene blue from aqueous solution

S. Sabar et al.

REACTIVE & FUNCTIONAL POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Waste Polypropylene Plastic Recycling toward Climate Change Mitigation and Circular Economy: Energy, Environmental, and Technoeconomic Perspectives

Raaj R. Bora et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Review Polymer Science

Advances and approaches for chemical recycling of plastic waste

Timmy Thiounn et al.

JOURNAL OF POLYMER SCIENCE (2020)

Add to Collection

Article Polymer Science

Synergistic effects of surface grafting with heparin and addition of poly(d,l-lactide) microparticles on properties of poly(l-lactide) single crystals scaffolds

Ahmed Bakry

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Synthesis of carboxyl-functionalized magnetic nanoparticle for the removal of methylene blue

Zou Jiaqi et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Add to Collection

Article Chemistry, Analytical

Methylene blue removal from water using H2SO4 crosslinked magnetic chitosan nanocomposite beads

Rahmi et al.

MICROCHEMICAL JOURNAL (2019)

Add to Collection

Review Engineering, Environmental

Plastic flexible films waste management - A state of art review

O. Horodytska et al.

WASTE MANAGEMENT (2018)

Add to Collection

Article Polymer Science

Hyaluronic Acid and Chitosan Surface Grafted Polylactide Single Crystals as Hydrophilic Building Blocks for Scaffold Materials

Ahmed Bakry et al.

POLYMER SCIENCE SERIES A (2018)

Add to Collection

Article Environmental Sciences

Study of the effectiveness of the third generation polyamide-amine and polypropylene imine dendrimers in removal of reactive blue 19 dye from aqueous solutions

Sepideh Sadeghi et al.

ENVIRONMENTAL HEALTH ENGINEERING AND MANAGEMENT JOURNAL (2018)

Add to Collection

Editorial Material Multidisciplinary Sciences

The future of plastics recycling Chemical advances are increasing the proportion of polymer waste that can be recycled

Jeannette M. Garcia et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Applied

Adsorption of methylene blue and malachite green on micro-mesoporous carbon materials

K. Jedynak et al.

ADSORPTION SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Engineering, Environmental

Removal of methylene blue from aqueous solution by sewage sludge-derived biochar: Adsorption kinetics, equilibrium, thermodynamics and mechanism

Shisuo Fan et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2017)

Add to Collection

Article Polymer Science

Flexible aliphatic poly(isocyanurate-oxazolidone) resins based on poly(ethylene glycol) diglycidyl ether and 4,4-methylene dicyclohexyl diisocyanate

Ahmed Bakry et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Add to Collection

Article Engineering, Chemical

Plasma activation and acrylic acid grafting on polypropylene nonwoven surface for the removal of cationic dye from aqueous media

Aminoddin Haji et al.

DESALINATION AND WATER TREATMENT (2015)

Add to Collection

Article Polymer Science

A new approach for the preparation of hydrophilic poly(L-lactide) porous scaffold for tissue engineering by using lamellar single crystals

Ahmed Bakry et al.

POLYMER INTERNATIONAL (2012)

Add to Collection

Article Environmental Sciences

Kinetics and equilibrium study of chromium adsorption on zeoliteNaX

P. K. Pandey et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2010)

Add to Collection

Meeting Abstract Chemistry, Multidisciplinary

Functionalized poly(l-lactide) single crystals coated with antigens in development of vaccines

G. Casini et al.

JOURNAL OF CONTROLLED RELEASE (2010)

Add to Collection

Article Agricultural Engineering

Reinforcement of carboxyl groups in the surface of Corynebacterium glutamicum biomass for effective removal of basic dyes

Sung Wook Won et al.

BIORESOURCE TECHNOLOGY (2009)

Add to Collection

Article Chemistry, Applied

Kinetic and equilibrium studies on the removal of cationic dyes from aqueous solution by adsorption onto a cyclodextrin polymer

Gregorio Crini

DYES AND PIGMENTS (2008)

Add to Collection

Article Engineering, Chemical

Synthesis and Characterization of Surface Sulfonated Polypropylene Films

Safiye Tuba Ecevit et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Chemistry, Applied

Surface properties and printability of polypropylene film treated by an air dielectric barrier discharge plasma

FA Morsy et al.

SURFACE COATINGS INTERNATIONAL PART B-COATINGS TRANSACTIONS (2006)

Add to Collection

Article Chemistry, Physical

Equilibrium, kinetics, mechanism, and process design for the sorption of methylene blue onto rice husk

V Vadivelan et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2005)

Add to Collection

Article Chemistry, Physical

Wetting behavior of flax fibers as reinforcement for polypropylene

I Aranberri-Askargorta et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)

Add to Collection

Sulfonated polypropylene microparticles from waste as adsorbents for methylene blue: Kinetic, equilibrium, and thermodynamic studies

Related references

Export Citation

Share Paper