4.7 Article

Fe2+/heat-coactivated PMS oxidation-absorption system for H2S removal from gas phase

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Preparation of Straw Porous Biochars by Microwave-Assisted KOH Activation for Removal of Gaseous H2S

Shuaibo Cui et al.

Summary: Two types of straw porous biochars were prepared using microwave-assisted KOH activation to eliminate H2S in the gas phase. The physical structures of the biochars were improved, and the oxygen-containing functional group content was raised. The adsorbents exhibited high specific surface areas and good performance for eliminating H2S, with equilibrium adsorption capacities of 57.91 and 61.47 mg/g.

ENERGY & FUELS (2021)

Review Environmental Sciences

Peracids - New oxidants in advanced oxidation processes: The use of peracetic acid, peroxymonosulfate, and persulfate salts in the removal of organic micropollutants of emerging concern - A review

Dariusz Kiejza et al.

Summary: There has been a growing interest in using advanced oxidation processes for water and wastewater decontamination, with new oxidants such as peracetic acid widely utilized. The degradation of organic compounds involves radicals derived from the activation of peracids, resulting in the formation of products of lower mass, less toxic, and more susceptible to biodegradation. The activation methods and matrix composition have a significant impact on the efficiency of contamination removal using peracids.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Chemistry, Applied

Overview and challenges of the photolytic and photocatalytic splitting of H2S

Habeebllah Oladipo et al.

Summary: This article reviews studies on the photolytic and photocatalytic splitting of H2S to generate hydrogen, comparing the economic potential and kinetics of gaseous and aqueous phase reactions. Higher efficiency has been achieved with MnS photocatalysts compared to CdS. Future work is needed to address challenges such as photo-corrosion in order to advance light-driven H2S splitting for hydrogen production.

CATALYSIS TODAY (2021)

Article Energy & Fuels

Adsorption of elemental mercury in flue gas using biomass porous carbons modified by microwave/hydrogen peroxide

Ying Li et al.

Summary: A clean modification method combining microwave activation and H2O2 impregnation of bio-char was proposed in this study to enhance the mercury adsorption capacity, which effectively improved the Hg0 removal efficiency by improving the pore structure and functional groups of biomass porous carbons. Oxygen and nitric oxide play a significant role in the mercury removal process.
Review Engineering, Environmental

Removal of pollutants from gas streams using Fenton (-like)-based oxidation systems: A review

Yangxian Liu et al.

Summary: Removal of pollutants from gas streams using Fenton-like oxidation systems has gained attention for its promising multi-pollutant removal capability. However, challenges like metal ion recovery, low radical utilization, and system stability remain to be addressed. Strategies like catalyst synthesis, mass transfer enhancement, and reactor optimization are proposed to overcome the existing defects and improve the efficiency of these technologies.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Environmental Sciences

A regenerable N-rich hierarchical porous carbon synthesized from waste biomass for H2S removal at room temperature

Lin Chen et al.

Summary: In this study, nitrogen-rich hierarchical porous carbons (NPCs) were synthesized from cypress saw-dust via a one-step strategy, showing excellent performance for H2S removal with high sulfur capacity and regeneration ability. The NPCs with carbon nitride (CN) loading exhibited a hierarchical porous structure with high nitrogen content, identified as active sites for H2S adsorption. These results demonstrate that NPCs are promising catalysts for efficient H2S removal with low cost and high reusability.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Review Energy & Fuels

Review on Removal of SO2, NOx, Mercury, and Arsenic from Flue Gas Using Green Oxidation Absorption Technology

Yan Wang et al.

Summary: The emissions of pollutants from coal-fired flue gas pose hazards to human health and ecosystems, leading to the development of technologies for simultaneous removal of multiple pollutants. Green oxidation absorption technology shows promise by utilizing existing equipment and offering a clean treatment process. Each technology has its own strengths and weaknesses, and the synergic use of multiple technologies may be a promising strategy to address their limitations.

ENERGY & FUELS (2021)

Review Engineering, Environmental

A Critical Review on Removal of Gaseous Pollutants Using Sulfate Radical-based Advanced Oxidation Technologies

Yangxian Liu et al.

Summary: The sulfate radical-based advanced oxidation technologies show promise in removing gaseous pollutants, but face challenges like unreliable technology and high costs. Combining multiple activation technologies can help overcome these drawbacks, while improving free radical yield and pollutant removal capacity, and conducting research to reduce costs are critical for further advancement.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Review Engineering, Chemical

Sorbents for the Capture of CO2 and Other Acid Gases: A Review

Cameron Halliday et al.

Summary: This article discusses the value generated by CO2 and other acid gases, as well as their environmental impact. It focuses on the role sorbents play in emission reduction and the acid gas economy, evaluating 15 sorbent categories for their performance. The review concludes with anticipated research opportunities and future trends in acid gas separation.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Article Engineering, Environmental

Precise control of heat-treatment conditions to improve the catalytic performance of V2O5/TiO2 for H2S removal

Jae Hwan Yang et al.

Summary: The results suggested that the catalyst heat-treated at 400 degrees C under N-2 atmosphere (N-400) exhibited excellent catalytic performance for H2S removal, with high H2S conversion and sulfur yield. The study highlighted the importance of precisely controlled heat-treatment to enhance catalytic activity for H2S removal.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Cu-Zn oxides nanoparticles supported on SBA-15 zeolite as a novel adsorbent for simultaneous removal of H2S and Hg0 in natural gas

Huawei Zhang et al.

Summary: By synthesizing a novel Cu-Zn mixed oxide supported SBA-15 zeolite, simultaneous removal of Hg-0 and H2S was achieved. The adsorbent exhibited outstanding removal efficiency and capture capacity at low temperatures and high flow rates. Moreover, the regeneration performance was excellent, providing an effective approach for simultaneous removal of H2S and Hg-0 in natural gas.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Removal of gaseous elemental mercury using thermally catalytic chlorite-persulfate complex

Runlong Hao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Engineering, Environmental

Radical-induced oxidation removal of multi-air-pollutant: A critical review

Bo Yuan et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Environmental Sciences

Multi-air-pollutant removal by using an integrated system: Key parameters assessment and reaction mechanism

Runlong Hao et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Engineering, Environmental

Removal of gaseous hydrogen sulfide using ultraviolet/Oxone-induced oxidation scrubbing system

Yan Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Removal of nitric oxide from flue gas using novel microwave -activated double oxidants system

Yan Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Functionalization effects on HKUST-1 and HKUST-1/graphene oxide hybrid adsorbents for hydrogen sulfide removal

Nidhika Bhoria et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Environmental

Simultaneous removal of siloxanes and H2S from biogas using an aerobic biotrickling filter

Yuyao Zhang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Review Green & Sustainable Science & Technology

A review on coal fl y ash -based adsorbents for mercury and arsenic removal

Friday O. Ochedi et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Environmental

Enhanced removal for H2S by Cu-ordered mesoporous carbon foam

Junwen Qi et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Chemical

Multilevel screening of ionic liquid absorbents for simultaneous removal of CO2 and H2S from natural gas

Jingwen Wang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Review Engineering, Environmental

Removal of H2S in biogas using biotrickling filter: Recent development

Hao Huynh Nhut et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Article Green & Sustainable Science & Technology

Simultaneous removal of CO2 and H2S from coalbed methane in a membrane contactor

Zhen Pan et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Engineering, Chemical

A review on application of cerium-based oxides in gaseous pollutant purification

Ye Shan et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Article Engineering, Environmental

Removal of NO in simulated flue with aqueous solution of peroxymonosulfate activated by high temperature and Fe(II)

Xiaojiao Chen et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Environmental

Elemental mercury removal from flue gas using heat and Co2+/Fe2+ coactivated oxone oxidation system

Yangxian Liu et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Multidisciplinary

Modeling study on CO2 and H2S simultaneous removal using MDEA solution

Tohid Nejad Ghaffar Borhani et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2016)

Article Engineering, Environmental

Nitric oxide removal by combined persulfate and ferrous-EDTA reaction systems

Yusuf G. Adewuyi et al.

CHEMICAL ENGINEERING JOURNAL (2015)