Related references
Note: Only part of the references are listed.Ethanol sensor using gadolinia-doped ceria solid electrolyte and double perovskite structure sensing material
Tong Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2021)
Study of response and recovery rate of YSZ-based electrochemical sensor by laser ablation method
Qian Lin et al.
IONICS (2020)
Superior sensitive NiFe2O4 electrode for mixed-potential NO2 sensor
Jinlong Xu et al.
CERAMICS INTERNATIONAL (2019)
Influence of sintering temperature on the physical, electrochemical and sensing properties of α-Fe2O3-SnO2 nanocomposite sensing electrode for a mixed-potential type NOx sensor
Aman Bhardwaj et al.
CERAMICS INTERNATIONAL (2019)
High-response mixed-potential type planar YSZ-based NO2 sensor coupled with CoTiO3 sensing electrode
Jing Wang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Transition metal oxide (Ni, Co, Fe)-tin oxide nanocomposite sensing electrodes for a mixed-potential based NO2 sensor
Aman Bhardwaj et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Improved sensing performances of NO2 sensors based on YSZ and porous sensing electrode prepared by MnCr2O4 admixed with phenol-formaldehyderesin microspheres
Quan Diao et al.
IONICS (2019)
Sensing Performance of a YSZ-Based Electrochemical NO2 Sensor Using Nanocomposite Electrodes
Young-Sung Yoo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
High performance mixed-potential-type Zirconia-based NO2 sensor with self-organizing surface structures fabricated by low energy ion beam etching
Rui You et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Mixed-potential-type NO2 sensors based on stabilized zirconia and CeO2-B2O3 (B = Fe, Cr) binary nanocomposites sensing electrodes
Rui You et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Electrospun yttria-stabilized zirconia nanofibers for low-temperature solid oxide fuel cells
Ja Yang Koo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Stabilized zirconia-based selective NO2 sensor using sol-gel derived Nb2O5 sensing-electrode
Kamaraj Mahendraprabhu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
High-temperature NO2 gas sensor based on stabilized zirconia and CoTa2O6 sensing electrode
Fangmeng Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
Improvement of NO2 sensing characteristic for mixed potential type gas sensor based on YSZ and Rh/Co3V2O8 sensing electrode
Jing Wang et al.
RSC ADVANCES (2017)
NO2-sensing properties of La0.65Sr0.35MnO3 synthesized by self-propagating combustion
Lianlian Wu et al.
IONICS (2016)
Fabrication of Well-Ordered Three-Phase Boundary with Nanostructure Pore Array for Mixed Potential-Type Zirconia-Based NO2 Sensor
Bin Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Mixed-potential type NO2 sensor based on La10Si6O27 electrolyte and WO3 sensing electrode with different morphologies
Yongguang Liu et al.
CERAMICS INTERNATIONAL (2016)
Mixed-potential type NOx sensor using stabilized zirconia and MoO3-In2O3 nanocomposites
Hao Cai et al.
CERAMICS INTERNATIONAL (2016)
A mixed-potential-type NO2 sensor based on a layered-structure Bi2W2O9 sensing electrode
Lianlian Wu et al.
IONICS (2015)
Mixed-potential-type YSZ-based sensor with nano-structured NiO and porous TPB processed with pore-formers using coating technique
Xiaoyang Cheng et al.
SENSORS AND ACTUATORS B-CHEMICAL (2015)
High performance mixed-potential type NO2 sensors based on three-dimensional TPB and Co3V2O8 sensing electrode
Fangmeng Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2015)
High performance three-phase boundary obtained by sand blasting technology for mixed-potential-type zirconia-based NO2 sensors
Ruize Sun et al.
SENSORS AND ACTUATORS B-CHEMICAL (2015)
Mixed-potential type NH3 sensor based on stabilized zirconia and Ni3V2O8 sensing electrode
Fangmeng Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2015)
A review of mixed-potential type zirconia-based gas sensors
Norio Miura et al.
IONICS (2014)
Highly sensitive mixed-potential-type NO2 sensor with YSZ processed using femtosecond laser direct writing technology
Yingzhou Guan et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Temperature dependence of NO2 sensitivity of YSZ-based mixed potential type sensor attached with NiO sensing electrode
Kamaraj Mahendraprabhu et al.
IONICS (2013)
Industrial Upscaling of Electrospinning and Applications of Polymer Nanofibers: A Review
Luana Persano et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2013)
High sensitivity and selectivity of mixed potential sensor based on Pt/YSZ/SmFeO3 to NO2 gas
Ho Truong Giang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2013)
Mixed-potential-type NO2 sensor using stabilized zirconia and Cr2O3-WO3 nanocomposites
Quan Diao et al.
SENSORS AND ACTUATORS B-CHEMICAL (2013)
Effect of nanocomposite Au-YSZ electrodes on potentiometric sensor response to NOx and CO
Todd Striker et al.
SENSORS AND ACTUATORS B-CHEMICAL (2013)
The effects of sintering temperature of MnCr2O4 nanocomposite on the NO2 sensing property for YSZ-based potentiometric sensor
Quan Diao et al.
SENSORS AND ACTUATORS B-CHEMICAL (2013)
Mixed-potential-type zirconia-based NO2 sensor with high-performance three-phase boundary
Xishuang Liang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2011)
Mechanochemical approach for fabrication of a nano-structured NiO-sensing electrode used in a zirconia-based NO2 sensor
Vladimir V. Plashnitsa et al.
ELECTROCHIMICA ACTA (2010)
Method for detection of NOx in exhaust gases by pulsed discharge measurements using standard zirconia-based lambda sensors
S. Fischer et al.
SENSORS AND ACTUATORS B-CHEMICAL (2010)
Application of commercial automotive sensor manufacturing methods for NOx/NH3 mixed potential sensors for on-board emissions control
Praveen K. Sekhar et al.
SENSORS AND ACTUATORS B-CHEMICAL (2010)
Air pollutants, oxidative stress and human health
Wei Yang et al.
MUTATION RESEARCH-GENETIC TOXICOLOGY AND ENVIRONMENTAL MUTAGENESIS (2009)
Dependence of NO2 sensitivity on thickness of oxide-sensing electrodes for mixed-potential-type sensor using stabilized zirconia
Perumal Elumalai et al.
IONICS (2006)
Sensor for directly determining the exhaust gas recirculation rate -: EGR sensor
Ralf Moos et al.
SENSORS AND ACTUATORS B-CHEMICAL (2006)
Mixed-potential-type zirconia-based NOx sensor using Rh-loaded NiO sensing electrode operating at high temperatures
Jian Wang et al.
SOLID STATE IONICS (2006)
Electrospinning of polymeric nanofibers for tissue engineering applications: A review
Quynh P. Pham et al.
TISSUE ENGINEERING (2006)
Development of NOx sensing devices based on YSZ and oxide electrode aiming for monitoring car exhausts
N Miura et al.
CERAMICS INTERNATIONAL (2004)
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
ZM Huang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Share Paper
