4.6 Article

Implementation of Hemispherical Resonator Gyroscope with 3 x 3 Optical Interferometers for Analysis of Resonator Asymmetry

Journal

SENSORS
Volume 22, Issue 5, Pages -

Publisher

MDPI
DOI: 10.3390/s22051971

Keywords

hemispherical resonator gyroscope; 3 x 3 optical interferometer; precision vibration measurement; asymmetric hemispherical resonator

Funding

  1. GIST Research Institute (GRI) - GIST [1711152311]
  2. Korea Medical Device Development Fund - Korea government (the Ministry of Science and ICT) [1711138073, KMDF_PR_20200901_0065]
  3. Korea Medical Device Development Fund - Korea government ( Ministry of Trade, Industry and Energy) [1711138073, KMDF_PR_20200901_0065]
  4. Korea Medical Device Development - Korea government (Ministry of Health Welfare) [1711138073, KMDF_PR_20200901_0065]
  5. Korea Medical Device Development - Korea government (Ministry of Food and Drug Safety)) [1711138073, KMDF_PR_20200901_0065]

Ask authors/readers for more resources

In this study, a hemispherical resonator gyroscope (HRG) was implemented using a consumer wineglass as the resonator and 3 x 3 optical interferometers as the detectors. The low quality of the off-the-shelf wineglass as a resonator was overcome by the high performance of the optical interferometer. The asymmetries in stiffness and absorption of the resonator were analyzed theoretically and confirmed experimentally. The straightness of the amplitude ratio of two n = 2 fundamental resonant modes of the resonator in a complex plane was proven. By utilizing this straightness and the high performance of the optical interferometer, four real constant parameters characterizing the HRG system were extracted. Experimental results showed that it was possible to measure the Coriolis force at the level of industrial grade using a resonator with an average resonance frequency of 444 Hz and Q value of 1477.2, and achieve a small bias stability of 2.093 degrees/h.
A hemispherical resonator gyroscope (HRG) has been implemented by using a consumer wineglass as the resonator and 3 x 3 optical interferometers as the detectors. The poorness of the off-the-shelf wineglass as the resonator can be overcome by the high performance of the optical interferometer. The effects of asymmetries in stiffness and absorption of the resonator are analyzed theoretically and confirmed experimentally. We prove that the trace of the amplitude ratio of two n = 2 fundamental resonant modes of the resonator follows a straight line in a complex plane. By utilizing the straightness of the ratio and the high performance of the optical interferometer, we extract four real constant parameters characterizing the HRG system. Experimentally, by using a resonator having an average resonance frequency of 444 Hz and Q value of 1477.2, it was possible to measure the Coriolis force at the level of industrial grade. The bias stability was measured as small as 2.093 degrees/h.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available