Related references
Note: Only part of the references are listed.Research on in-situ corrosion process monitoring and evaluation of reinforced concrete via ultrasonic guided waves
Yuqing Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Ambient pressure carbonation curing of reinforced concrete for CO2 utilization and corrosion resistance
Xiangping Xian et al.
JOURNAL OF CO2 UTILIZATION (2022)
A review on corrosion detection and protection of existing reinforced concrete (RC) structures
J. Y. Hu et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Electrical Resistivity Measurements for Nondestructive Evaluation of Chloride-Induced Deterioration of Reinforced Concrete-A Review
Kevin Paolo V. Robles et al.
MATERIALS (2022)
Vertical-Flow Paper Sensor for On-Site and Prompt Evaluation of Chloride Contamination in Concrete Structures
Noemi Colozza et al.
ANALYTICAL CHEMISTRY (2021)
A novel approach for non-destructive EMI-based corrosion monitoring of concrete-embedded reinforcements using multi-orientation piezoelectric sensors
Jamal Ahmadi et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
A review on fiber optic sensors for rebar corrosion monitoring in RC structures
Fujian Tang et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Fluorescent molecular probe based optical fiber sensor dedicated to pH measurement of concrete
Ayedah Tariq et al.
SENSORS AND ACTUATORS B-CHEMICAL (2021)
Reinforced concrete structures: A review of corrosion mechanisms and advances in electrical methods for corrosion monitoring
Romain Rodrigues et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
System for Continuous Monitoring of the Corrosion Rate in Concrete Reinforcement based on Bimetallic Batch Sensors
D. S. Shevtsov et al.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2021)
Multiparametric analysis by paper-assisted potentiometric sensors for diagnostic and monitoring of reinforced concrete structures
Noemi Colozza et al.
SENSORS AND ACTUATORS B-CHEMICAL (2021)
5 years of in situ reinforcement corrosion monitoring in the splash and submerged zone of a cracked concrete element
A. Michel et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Multifunctional properties of shape memory materials in civil engineering applications: A state-of-the-art review
Iman Abavisani et al.
JOURNAL OF BUILDING ENGINEERING (2021)
An Embedded-Sensor Approach for Concrete Resistivity Measurement in On-Site Corrosion Monitoring: Cell Constants Determination
Jose Enrique Ramon et al.
SENSORS (2021)
Review of fiber optic sensors for corrosion monitoring in reinforced concrete
Liang Fan et al.
CEMENT & CONCRETE COMPOSITES (2021)
Embedded PZT sensors for monitoring formation and crack opening in concrete structures
Amarteja Kocherla et al.
MEASUREMENT (2021)
Fiber Optic Sensors Embedded in Textile-Reinforced Concrete for Smart Structural Health Monitoring: A Review
Lourdes S. M. Alwis et al.
SENSORS (2021)
Embedded Resistivity Sensor for Compressive Strength Prediction of Cement Paste by Electrochemical Impedance Spectroscopy
Lin Chi et al.
IEEE SENSORS LETTERS (2021)
Monitoring corrosion of steel bars in reinforced concrete based on helix strains measured from a distributed fiber optic sensor
Liang Fan et al.
ENGINEERING STRUCTURES (2020)
Corrosion monitoring of the reinforced concrete by using the embedded annular piezoelectric transducer
Peng Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Combined application of novel electromagnetic sensors and acoustic emission apparatus to monitor corrosion process of reinforced bars in concrete
Zhe Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Coupled application of innovative electromagnetic sensors and digital image correlation technique to monitor corrosion process of reinforced bars in concrete
Zhe Li et al.
CEMENT & CONCRETE COMPOSITES (2020)
Monitoring of CFA pile test using three dimensional laser scanning and distributed fiber optic sensors
Hyungjoon Seo
OPTICS AND LASERS IN ENGINEERING (2020)
Nonlinear Ultrasonic Second Harmonic Assessment of Concrete Defects Based on Embedded Piezoelectric Sensors
Jun Chen et al.
RESEARCH IN NONDESTRUCTIVE EVALUATION (2020)
Miniature Resistance Measurement Device for Structural Health Monitoring of Reinforced Concrete Infrastructure
Dean M. Corva et al.
SENSORS (2020)
A rebar corrosion sensor embedded in concrete based on surface acoustic wave
Liqiang Xie et al.
MEASUREMENT (2020)
Reliability and long-term evaluation of GO-MnO2 nano material as a newer corrosion monitoring sensor for reinforced concrete structures
Subbiah Karthick et al.
CEMENT & CONCRETE COMPOSITES (2019)
Development of low cost packaged fibre optic sensors for use in reinforced concrete structures
Richard H. Scott et al.
MEASUREMENT (2019)
Use of a novel electro-magnetic apparatus to monitor corrosion of reinforced bar in concrete
Zhe Li et al.
SENSORS AND ACTUATORS A-PHYSICAL (2019)
In-situ monitoring of corrosion-induced expansion and mass loss of steel bar in steel fiber reinforced concrete using a distributed fiber optic sensor
Liang Fan et al.
COMPOSITES PART B-ENGINEERING (2019)
A review on five key sensors for monitoring of concrete structures
Shima Taheri
CONSTRUCTION AND BUILDING MATERIALS (2019)
In situ DC electrical resistivity mapping performed in a reinforced concrete wharf using embedded sensors
Johann Priou et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Application of Thermal Image Data to Detect Rebar Corrosion in Concrete Structures
Seunguk Na et al.
APPLIED SCIENCES-BASEL (2019)
A Recent Progress of Steel Bar Corrosion Diagnostic Techniques in RC Structures
Dong Luo et al.
SENSORS (2019)
Identification of incipient pitting corrosion in reinforced concrete structures using guided waves and piezoelectric wafer transducers
Rajeshwara Chary Sriramadasu et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)
Non-Contact Measurement to Detect Steel Rebar Corrosion in Reinforced Concrete by Electrochemical Impedance Spectroscopy
Yoshinao Hoshi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Monitoring invisible corrosion in concrete using a combination of wave propagation techniques
Ashutosh Sharma et al.
CEMENT & CONCRETE COMPOSITES (2018)
Application of Fe-C coated LPFG sensor for early stage corrosion monitoring of steel bar in RC structures
Fujian Tang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Continuous Monitoring of Steel Corrosion Condition in Concrete Under Drying/Wetting Exposure to Chloride Solution by Embedded MnO2 Sensor
Ming Jin et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2018)
All-Optical Photoacoustic Sensors for Steel Rebar Corrosion Monitoring
Cong Du et al.
SENSORS (2018)
Self-Powered Wireless Sensor Network for Automated Corrosion Prediction of Steel Reinforcement
Dan Su et al.
JOURNAL OF SENSORS (2018)
Steel Bar corrosion monitoring based on encapsulated piezoelectric sensors
Ying Xu et al.
2017 2ND INTERNATIONAL CONFERENCE ON RELIABILITY ENGINEERING (ICRE 2017) (2018)
Evaluation of the effectiveness of migrating corrosion inhibitors and hydrophobizers for protection against corrosion of steel reinforcement in concrete using bimetallic batch sensor
D. S. Shevtsov et al.
INTERNATIONAL JOURNAL OF CORROSION AND SCALE INHIBITION (2018)
Monitoring Concrete Deterioration Due to Reinforcement Corrosion by Integrating Acoustic Emission and FBG Strain Measurements
Weijie Li et al.
SENSORS (2017)
Electrochemical Sensors for Monitoring the Corrosion Conditions of Reinforced Concrete Structures: A Review
Rita B. Figueira
APPLIED SCIENCES-BASEL (2017)
Mechanism and sensitivity of Fe-C coated long period fiber grating sensors for steel corrosion monitoring of RC structures
Yizheng Chen et al.
CORROSION SCIENCE (2017)
A highly sensitive ultrathin-film iron corrosion sensor encapsulated by an anion exchange membrane embedded in mortar
Healin Im et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Remote sensing of concrete bridge decks using unmanned aerial vehicle infrared thermography
Tarek Omar et al.
AUTOMATION IN CONSTRUCTION (2017)
Assessment of corrosion of reinforcing steel bars in concrete using embedded piezoelectric transducers based on ultrasonic wave
Du Peng et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Corrosion Detection of Reinforcement of Building Materials with Piezoelectric Sensors
J. Peng
KEMIJA U INDUSTRIJI-JOURNAL OF CHEMISTS AND CHEMICAL ENGINEERS (2017)
Monitoring Corrosion Process of Reinforced Concrete Structure Using FBG Strain Sensor
Omar Almubaied et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2017)
Damage evaluation of concrete based on Brillouin corrosion expansion sensor
Haifeng Lv et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
An innovative corrosion evaluation technique for reinforced concrete structures using magnetic sensors
Jinrui Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Methods for measuring pH in concrete: A review
Ali Behnood et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Corrosion Monitoring of Reinforcement Steel Using Galvanostatically Induced Potential Transients
Y. Abbas et al.
IEEE SENSORS JOURNAL (2016)
Combined Energy Harvesting and Structural Health Monitoring Potential of Embedded Piezo-Concrete Vibration Sensors
Naveet Kaur et al.
JOURNAL OF ENERGY ENGINEERING (2015)
Monitoring the Corrosion Process of Reinforced Concrete Using BOTDA and FBG Sensors
Jianghong Mao et al.
SENSORS (2015)
Combined Energy Harvesting and Structural Health Monitoring Potential of Embedded Piezo-Concrete Vibration Sensors
Naveet Kaur et al.
JOURNAL OF ENERGY ENGINEERING (2015)
Steel bar corrosion monitoring with long-period fiber grating sensors coated with nano iron/silica particles and polyurethane
Ying Huang et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2015)
Studies on the effect of a limited polarization range of reinforcement on impedance spectra shapes of steel in concrete
Mariusz Jasniok
7TH SCIENTIFIC-TECHNICAL CONFERENCE ON MATERIAL PROBLEMS IN CIVIL ENGINEERING (MATBUD'2015) (2015)
Early Corrosion Detection in Prestressed Concrete Girders Using Acoustic Emission
Mohamed K. ElBatanouny et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2014)
Electromagnetic characterization and shielding effectiveness of concrete composite reinforced with carbon nanotubes in the mobile phones frequency band
D. Micheli et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2014)
Relationship between concrete resistivity and corrosion rate - A literature review
Karla Hornbostel et al.
CEMENT & CONCRETE COMPOSITES (2013)
Corrosion Energy: A Novel Source to Power the Wireless Sensor
Guofu Qiao et al.
IEEE SENSORS JOURNAL (2013)
Corrosion Damage Quantification of Prestressing Strands Using Acoustic Emission
Jese Mangual et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)
Development of a multi-ring resistivity cell and multi-electrode resistivity probe for investigation of cover concrete condition
R. du Plooy et al.
NDT & E INTERNATIONAL (2013)
A New Corrosion Sensor to Determine the Start and Development of Embedded Rebar Corrosion Process at Coastal Concrete
Chen Xu et al.
SENSORS (2013)
Methodology for Assessing the Probability of Corrosion in Concrete Structures on the Basis of Half-Cell Potential and Concrete Resistivity Measurements
Lukasz Sadowski
SCIENTIFIC WORLD JOURNAL (2013)
Noise removal by cluster analysis after long time AE corrosion monitoring of steel reinforcement in concrete
L. Calabrese et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
An embedded multi-parameter corrosion sensor for reinforced concrete structures
H. Yu et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2012)
Modification of the wavelength-strain coefficient of FBG for the prediction of steel bar corrosion embedded in concrete
Wen Chen et al.
OPTICAL FIBER TECHNOLOGY (2012)
Fe-C-coated fibre Bragg grating sensor for steel corrosion monitoring
Wenbin Hu et al.
CORROSION SCIENCE (2011)
Corrosion risk assessment of chloride-contaminated concrete structures using embeddable multi-cell sensor system
Lu Shuang et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2011)
Preliminary Development and Evaluation of Fiber-Optic Chemical Sensors
Daniel O. McPolin et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2011)
Monitoring of corrosion in reinforced concrete structure using Bragg grating sensing
Junqi Gao et al.
NDT & E INTERNATIONAL (2011)
Identification of the reinforcing steel's corrosion state in RC beams based on electrochemical sensor
Guofu Qiao et al.
SENSOR REVIEW (2011)
A flexible pH sensor based on the iridium oxide sensing film
Wen-Ding Huang et al.
SENSORS AND ACTUATORS A-PHYSICAL (2011)
Corrosion detection in reinforced concrete using induction heating and infrared thermography
K. Kobayashi et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2011)
meso-Tetraarylporpholactones as high pH sensors
Gamal E. Khalil et al.
ANALYST (2010)
Determining the appropriate scan rate to perform cyclic polarization test on the steel bars in concrete
A. Poursaee
ELECTROCHIMICA ACTA (2010)
Potentiometric determination of the chloride ion activity in cement based materials
Ueli Angst et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2010)
Examples of reinforcement corrosion monitoring by embedded sensors in concrete structures
I. Martinez et al.
CEMENT & CONCRETE COMPOSITES (2009)
Development of an embeddable sensor to monitor the corrosion process of new and existing reinforced concrete structures
Gustavo S. Duffo et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Galvanostatic pulse technique with the current confinement guard ring: The laboratory and finite element analysis
A. Poursaee et al.
CORROSION SCIENCE (2008)
Evaluation of embeddable potential sensor for corrosion monitoring in concrete structures
S. Muralidharan et al.
ELECTROCHIMICA ACTA (2008)
A novel optical fiber sensor for steel corrosion in concrete structures
Christopher K. Y. Leung et al.
SENSORS (2008)
A new system for early chloride detection in concrete
Francine Laferriere et al.
SMART MATERIALS & STRUCTURES (2008)
Review on state-of-the-art in polymer based pH sensors
Olga Korostynska et al.
SENSORS (2007)
Corrosion monitoring of steel in concrete by galvanostatic pulse technique
S. Sathiyanarayanan et al.
CEMENT & CONCRETE COMPOSITES (2006)
In situ measurement of Cl- concentrations and pH at the reinforcing steel/concrete interface by combination sensors
Rong-Gui Du et al.
ANALYTICAL CHEMISTRY (2006)
Health monitoring and rehabilitation of a concrete structure using intelligent materials
G Song et al.
SMART MATERIALS & STRUCTURES (2006)
Shape memory alloys as strain sensors in composites
H Nagai et al.
SMART MATERIALS AND STRUCTURES (2006)
Electrochemical studies on the solid embeddable reference sensors for corrosion monitoring in concrete structure
S Muralidharan et al.
MATERIALS LETTERS (2006)
Corrosion rate of steel in concrete - Measurements beyond the Tafel law
B Elsener
CORROSION SCIENCE (2005)
Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcement
J Gulikers
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2005)
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structure Part 2. Laboratory electrochemical testing of sensors in concrete
ZT Park et al.
CEMENT AND CONCRETE RESEARCH (2005)
Potentiostatic determination of chloride threshold values for rebar depassivation - Experimental and statistical study
D Izquierdo et al.
ELECTROCHIMICA ACTA (2004)
Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method
C Andrade et al.
MATERIALS AND STRUCTURES (2004)
Non destructive determination of the free chloride content in cement based materials
B Elsener et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2003)
Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques
MF Montemor et al.
CEMENT & CONCRETE COMPOSITES (2003)
Optical fibre long-period grating sensors: Characteristics and application
SW James et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2003)
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structures: Part 1. Laboratory tests to correlate galvanic current with actual damage
JH Yoo et al.
CEMENT AND CONCRETE RESEARCH (2003)
Macrocell sensor systems for monitoring of the corrosion risk of the reinforcement in concrete structures
M Raupach et al.
NDT & E INTERNATIONAL (2001)
Test methods for on site measurement of resistivity of concrete - a RILEM TC-154 technical recommendation
RB Polder
CONSTRUCTION AND BUILDING MATERIALS (2001)
Half-cell potential mapping to assess repair work on RC structures
B Elsener
CONSTRUCTION AND BUILDING MATERIALS (2001)
Share Paper
