4.5 Article

Functional and field performance of epoxy asphalt technology - state-of-the-art

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Toward the long-term aging influence and novel reaction kinetics models of bitumen

Shisong Ren et al.

Summary: This study aimed to investigate the long-term aging influence on bitumen and develop consecutive models to describe its aging reaction kinetics. The results showed that the aging index was significantly affected by the selected parameters. Additionally, the transformation reaction from resin to asphaltene molecules was found to be the control step in the consecutive reaction model.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2023)

Article Construction & Building Technology

Properties of paving epoxy asphalt with epoxy-terminated hyperbranched polyester

Peijun Xu et al.

Summary: In this study, the modification of hydroxyl-terminated hyperbranched polyester (HBP) to epoxy-terminated HBP successfully improved the toughness of epoxy asphalt at low temperature. Epoxy-terminated HBP exhibited good compatibility with epoxy resin and could still enhance the toughness of epoxy asphalt through its hyperbranched structure.

ROAD MATERIALS AND PAVEMENT DESIGN (2022)

Article Construction & Building Technology

Effect of epoxy resin content and conversion rate on the compatibility and component distribution of epoxy asphalt: A MD simulation study

Mingyue Li et al.

Summary: The research utilized molecular dynamics simulation technology to investigate the reaction process between epoxy resin and curing agent in epoxy asphalt, revealing the impact of resin content and conversion rate on asphalt performance. Results showed that an increase in resin content improved low-temperature performance, but a higher conversion rate had a negative effect on this aspect.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Influencing factors and mechanisms of blistering in epoxy asphalt mixtures for steel deck pavements

Menghui Liao et al.

Summary: In this study, the three main factors influencing blistering in pavement were investigated, along with the deformation characteristics and growth mechanisms of blisters. The results showed that temperature had the greatest influence on blistering growth, while the initial debonding area had the least influence. Blistering growth reached its limit within 30 to 90 minutes during the curing period, and blister deformation was rapid when the ambient temperature exceeded 30 degrees C. The ability of epoxy asphalt mixtures to resist deformation positively correlated with curing time.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Impact of train vibration on physical and mechanical properties of epoxy asphalt concrete in the road-railway bridge

Yu-heng Zhang et al.

Summary: The study found that train-induced vibration significantly affects the segregation and stability of EAC during paving on the road deck bridge. The frequency and duration of the vibration are the key factors influencing the physical properties of EAC. Despite the impact on physical properties, EAC retains high performance due to its chemical curing, highlighting the importance of timely breakdown rolling during the initial stage of paving construction under train-induced vibration.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

The feasibility of using epoxy asphalt to recycle a mixture containing 100% reclaimed asphalt pavement (RAP)

Xingyu Yi et al.

Summary: The study explored the feasibility of using epoxy asphalt for recycling mixtures containing 100% RAP, with the recycled mixture showing better rutting resistance but inferior fatigue performance compared to virgin epoxy asphalt. The low temperature cracking resistance and moisture susceptibility of the recycled mixture were similar to the virgin mixture.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Green & Sustainable Science & Technology

Influence of thermal-oxidative aging on the mechanical performance and structure of cold-mixed epoxy asphalt

Jingjing Si et al.

Summary: This study investigated the mechanical performance and structural changes of cold-mixed epoxy asphalt (CEA) after thermal-oxidative aging. The results showed that the tensile strength of CEA increased while the elongation at break decreased significantly after thermal-oxidative aging. The aging process caused the epoxy resin in CEA to post-cure, oxidize, degrade, and break the cross-linked network, as well as agglomerate and oxidize the asphalt particles in CEA.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Construction & Building Technology

Performance Evaluation of Stone Matrix Asphalt Mixtures and Low-Temperature Properties of Asphalt Binders Containing Reclaimed Asphalt Pavement Materials Modified with Nanosilica

Seyed Ataollah Saed et al.

Summary: This study evaluated the performance of stone matrix asphalt (SMA) mixtures modified with nanosilica and reclaimed asphalt pavement (RAP) materials. The results showed that nanosilica significantly increased the rutting resistance and resilient modulus of the mixtures, as well as the moisture susceptibility and fracture resistance. However, the effectiveness of nanosilica in improving the tensile strength ratio (TSR) of the mixtures was undermined when used in combination with RAP materials, and the modification of asphalt binders with nanosilica decreased the low-temperature performance, especially in binders containing RAP materials.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

Article Construction & Building Technology

Estimating Moisture Resistance of asphalt mixture containing epoxy resin using Surface Free Energy Method and Modified Lottman test

Hossein Bahmani et al.

Summary: The research demonstrated that adding epoxy resin can reduce the moisture sensitivity of asphalt mixtures containing siliceous aggregates, by increasing adhesion between bitumen and aggregates as well as increasing wetting of aggregates surface with bitumen. The addition of epoxy resin also improved moisture sensitivity in asphalt mixtures containing limestone aggregates, but this improvement was mainly due to increased adhesion between bitumen and aggregates, while the impact of bitumen coating on aggregates surface did not change significantly. Among the asphalt mixtures studied, the highest moisture resistance was observed in the asphalt mixture containing 4% epoxy resin, leading to significant improvement in Tensile Strength Ratio for both limestone and siliceous mixtures.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Article Construction & Building Technology

Fatigue Properties of Aged Porous Asphalt Mixtures with an Epoxy Asphalt Binder

Xiaolong Li et al.

Summary: This study explored the fatigue performance of porous asphalt mixtures produced with epoxy asphalt binders, and found that the use of epoxy asphalt binder can greatly improve the fatigue resistance of porous mixtures. The study also found that long-term aging decreases the fatigue life of porous mixtures, and that loading sequence has a significant influence on the damage accumulation of the mixtures.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

Article Construction & Building Technology

Rheological characteristics of epoxy asphalt binders and engineering properties of epoxy asphalt mixtures - state-of-the-art

Ali Jamshidi et al.

Summary: The article discussed the concepts, theories, and engineering properties of epoxy asphalt technology, highlighting its superior rheological properties and structural performance compared to traditional asphalt mixtures. However, concerns remain regarding recyclability, initial strength, and total cost of pavement construction.

ROAD MATERIALS AND PAVEMENT DESIGN (2022)

Article Construction & Building Technology

Integrated Design of Structure and Material of Epoxy Asphalt Mixture Used in Steel Bridge Deck Pavement

Wen Nie et al.

Summary: This study comprehensively investigates the integrated structural and material design of the epoxy asphalt mixture used in steel bridge deck pavement. The results show that epoxy asphalt concrete has better flexibility with a higher fatigue endurance limit strain level compared to the steel bridge deck pavement, indicating a longer service life can be achieved. Additionally, epoxy asphalt concrete has significant water tightness, protecting the steel plate interface from corrosion and ensuring good bonding performance.

BUILDINGS (2022)

Article Green & Sustainable Science & Technology

Development of porous asphalt mixture with bio-based epoxy asphalt

Qing Lu et al.

Summary: This study improved the durability and strength of porous asphalt mixture by formulating a bio-based epoxy asphalt binder (BEAB) and optimizing its mixture design. Testing showed that the formulated BEAB can enhance the raveling resistance and stability of porous asphalt mixture without affecting its permeability.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Fracture Characterization of Stone Matrix Asphalt Mixtures Incorporating Reclaimed Asphalt Pavement and Rejuvenator

Lekhaz Devulapalli et al.

Summary: This study demonstrated that incorporating rejuvenators can improve the performance of reclaimed asphalt pavement (RAP) in stone matrix asphalt (SMA) mixtures, with the choice and dosage of rejuvenators affecting the maximum tensile strength, fracture energy, and flexibility index of the mixtures. The SMA mixture with 30% RAP content and 6% waste vegetable oil (WVO) performed the best in terms of fracture characteristics.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

Article Construction & Building Technology

Development of eco-friendly fire-retarded warm-mix epoxy asphalt binders using reactive polymeric flame retardants for road tunnel pavements

Ru Chen et al.

Summary: By incorporating reactive polymeric flame retardant, the fire retardancy of pure WEAB was significantly improved and the construction time was extended. The flame retardant also increased the glass transition temperature of WEAB and improved its thermal stability.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Strength characteristics and prediction of epoxy resin pavement mixture

Jiayun Xu et al.

Summary: Research has shown that high-temperature curing can accelerate the strength development of epoxy resin pavement mixtures, and both curing time and epoxy resin binder aggregate ratio affect the performance of the mixtures. The optimum curing time for performance testing under 25 degrees is 30 days, and increasing the amount of binding material improves the deformation resistance of the mixture. Prediction models for strength and deformation characteristics of the mixture are proposed to determine curing time, open traffic time, and optimal binder aggregate ratio.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Properties of epoxy-resin binders and feasibility of their application in pavement mixtures

Xiaoqing Wang et al.

Summary: Epoxy resin pavement mixtures (ERPMs) exhibit excellent high-temperature stability, low-temperature crack resistance, and water stability, with performance metrics superior to standard asphalt mixtures. The results of the study are expected to promote the application of ERPMs in road construction and maintenance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Review Construction & Building Technology

Emerging technologies in cool pavements: A review

B. R. Anupam et al.

Summary: The article discusses the impact of infrastructure development on the environment and ecosystem, with a focus on the urban heat island effect. Research shows that pavement temperature has a significant influence on urban temperature, leading to the introduction of various cool pavement technologies to mitigate the heat island effect. Emerging cool pavement technologies such as reflective pavements and evaporative pavements are being developed, but face various limitations.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Review Construction & Building Technology

Applications of epoxy materials in pavement engineering

Qian Xiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Evaluation of epoxy asphalt rubber with silane coupling agent used as tack coat for seasonally frozen orthotropic steel bridge decks

Qibo Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Influence of Aggregate Packing on the Performance of Uncured and Cured Epoxy Asphalt Mixtures

Zhaohui Min et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Preliminary Evaluation of Hot Mix Asphalt Containing Reclaimed Epoxy Asphalt Materials

Mohammed Alamri et al.

SUSTAINABILITY (2020)

Article Construction & Building Technology

Impact of reactive oxygen species on bitumen aging - The Viennese binder aging method

Johannes Mirwald et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Long-term durability of epoxy-modified open-graded porous asphalt wearing course

Jeremy P. Wu et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2019)

Article Construction & Building Technology

Development and performance evaluation of epoxy asphalt concrete modified with glass fibre

Xi Wang et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2019)

Article Construction & Building Technology

Chemical and physical properties of hot mixing epoxy asphalt binders

Peiliang Cong et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Laboratory evaluation of waterborne epoxy bitumen emulsion for pavement preventative maintenance application

Chichun Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Engineering, Civil

Kinetic Viscoelasticity of Crosslinking Epoxy Asphalt

Panos Apostolidis et al.

TRANSPORTATION RESEARCH RECORD (2019)

Article Construction & Building Technology

Performance evaluation of warm mix asphalt additive modified epoxy asphalt rubbers

Jie Gong et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Performance Evaluation of Epoxy-Asphalt Mixture Blended with Glass Aggregate

Zhaohui Min et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Article Construction & Building Technology

Characterization of effects of reclaimed asphalt pavement (RAP) source and content on dynamic modulus of hot mix asphalt concrete

Ali Jamshidi et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Laboratory investigation of OGFC-5 porous asphalt ultra-thin wearing course

Mingjun Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Green & Sustainable Science & Technology

Low temperature and fatigue characteristics of treated crumb rubber modified asphalt after a long term aging procedure

Zixuan Chen et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Green & Sustainable Science & Technology

Preparation and characterization of waterborne epoxy modified bitumen emulsion as a potential high-performance cold binder

Rui Li et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Construction & Building Technology

Thermal Effect on Rheological Properties of Epoxy Asphalt Mixture and Stress Prediction for Bridge Deck Paving

Wei Huang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Article Construction & Building Technology

Performance Characteristics of Diluted Epoxy Asphalt Binders and Their Potential Application in Chip Seal

Bo Yao et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Article Construction & Building Technology

Comparative analysis of cold-mixed epoxy and epoxy SBS-modified asphalts: Curing rheology, thermal, and mechanical properties

Jingjing Si et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Evaluation of epoxy asphalt-based concrete substructure for high-speed railway ballastless track

Yang Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Modification of alkyl group terminated hyperbranched polyester on paving epoxy asphalt

Peijun Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Prediction and sensitivity analysis of long-term skid resistance of epoxy asphalt mixture based on GA-BP neural network

Dong Zheng et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Halogen-free flame retarded cold-mix epoxy asphalt binders: Rheological, thermal and mechanical characterization

Ru Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Effects of TiO2 pillared montmorillonite nanocomposites on the properties of asphalt with exhaust catalytic capacity

Jiao Jin et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Energy & Fuels

Investigation of enhancing effect and mechanism of basalt fiber on toughness of asphalt material

Xiaolong Sun et al.

PETROLEUM SCIENCE AND TECHNOLOGY (2018)

Article Construction & Building Technology

Evaluation of asphalt mixture laboratory long-term ageing methods for performance testing and prediction

Michael D. Elwardany et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2017)

Review Green & Sustainable Science & Technology

Performance of pavements incorporating industrial byproducts: A state-of-the-art study

Ali Jamshidi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Proceedings Paper Materials Science, Multidisciplinary

Epoxy asphalt concrete is a perspective material for the construction of roads

Valerii Vyrozhemskyi et al.

BUILDING UP EFFICIENT AND SUSTAINABLE TRANSPORT INFRASTRUCTURE 2017 (BESTINFRA2017) (2017)

Article Construction & Building Technology

Performances evaluation of epoxy asphalt mixture containing snow-melting agent

Zhaohui Min et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Influence of foaming effect, operation time and health preserving properties of foam epoxy asphalt mixtures

Huang Ming et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Initial and replacement riding surface for the orthotropic San Mateo/Hayward Bridge

R. Maggenti et al.

BRIDGE STRUCTURES (2017)

Article Construction & Building Technology

Towards an optimised lab procedure for long-term oxidative ageing of asphalt mix specimen

Daniel Steiner et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2016)

Article Construction & Building Technology

Development and performance evaluation of epoxy asphalt concrete modified with mineral fiber

Yongchao Xue et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Evaluation of Basic Oxygen Furnace (BOF) material into slag-based asphalt concrete to be used in railway substructure

Qiushi Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Toughness modification of hyperbranched polyester on epoxy asphalt

Peijun Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Photocatalytic pavements with epoxy-bonded TiO2-containing spreading material

D. Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Experimental evaluation of urban heat island mitigation potential of retro-reflective pavement in urban canyons

Federico Rossi et al.

ENERGY AND BUILDINGS (2016)

Article Construction & Building Technology

Investigation on Fracture Performance of Lightweight Epoxy Asphalt Concrete Based on Microstructure Characteristics

Jing Hu et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)

Article Construction & Building Technology

Novel Method of Coating Titanium Dioxide on to Asphalt Mixture Based on the Breath Figure Process for Air-Purifying Purpose

Zhen Leng et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)

Article Construction & Building Technology

Integrated Design Procedure for Epoxy Asphalt Concrete-Based Wearing Surface on Long-Span Orthotropic Steel Deck Bridges

Wei Huang

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)

Article Construction & Building Technology

Effects of Microwave Curing on the Chemical and Physical Properties of Epoxy Asphalt

Tao Ai et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)

Article Engineering, Civil

Comparative investigation into field performance of steel bridge deck asphalt overlay systems

Xiaoyang Jia et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2016)

Review Green & Sustainable Science & Technology

Performance of pavements incorporating waste glass: The current state of the art

Ali Jamshidi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Engineering, Civil

Cracking Mechanism and Repair Techniques of Epoxy Asphalt on Steel Bridge Deck Pavement

Chaoen Yin et al.

TRANSPORTATION RESEARCH RECORD (2016)

Article Construction & Building Technology

Performance evaluation of epoxy modified open-graded porous asphalt concrete

Sang Luo et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Design and laboratory evaluation of small particle porous epoxy asphalt surface mixture for roadway pavements

Zhendong Qian et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Review Construction & Building Technology

Alternate uses of epoxy asphalt on bridge decks and roadways

Qing Lu et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Characterization of the rate of change of rheological properties of nano-modified asphalt

Ali Jamshidi et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Photocatalytic degradation of vehicle exhausts on asphalt pavement by TiO2/rubber composite structure

Wei Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

A pothole patching material for epoxy asphalt pavement on steel bridges: Fatigue test and numerical analysis

Yuming Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Performance of hot mix epoxy asphalt binder and its concrete

Haiyan Yin et al.

MATERIALS AND STRUCTURES (2015)

Article Construction & Building Technology

Construction and pavement properties after seven years in porous asphalt with long life

Akihiro Moriyoshi et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Flame retardancy, thermal, and mechanical properties of mixed flame retardant modified epoxy asphalt binders

Yuge Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Effect of pavement design parameters on the behaviour of orthotropic steel bridge deck pavements under traffic loading

Tae Woo Kim et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2014)

Article Construction & Building Technology

Verification of effectiveness of chip seal as a pavement preventive maintenance treatment using LTPP data

Michael S. Mamlouk et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2014)

Article Construction & Building Technology

Asphalt concrete modification with waste PMMA/ATH

E. Sustersic et al.

MATERIALS AND STRUCTURES (2014)

Article Construction & Building Technology

Epoxy asphalt concrete protective course used on steel railway bridge

Leilei Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Development of a lightweight epoxy asphalt mixture for bridge decks

Zhendong Qian et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Effect of nanoclay and conventional flame retardants on asphalt mixtures fire reaction

Alice Bonati et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Design approach for epoxy modified bitumen to be used in antiskid surfaces on asphalt pavement

Y. Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Polymer Science

Effect of particle size and content of magnesium hydroxide on flame retardant properties of asphalt

Fan Ren et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Article Construction & Building Technology

Performance of an Anti-Icing Epoxy Overlay on Asphalt Surfaces

Logan M. Young et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2013)

Article Construction & Building Technology

Novel bituminous mastics for pavements with improved fire performance

M. Barral et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Construction & Building Technology

Ignitability and thermal stability of asphalt binders and mastics for flexible pavements in highway tunnels

Alice Bonati et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Construction & Building Technology

Investigation of mechanical properties of thin epoxy polymer overlay materials upon orthotropic steel bridge decks

L. T. Mo et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Construction & Building Technology

A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials

Hassan Al Nageim et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Materials Science, Characterization & Testing

State of the Art of Asphalt Surfacings on Long-spanned Orthotropic Steel Decks in China

Xianhua Chen et al.

JOURNAL OF TESTING AND EVALUATION (2012)

Article Materials Science, Multidisciplinary

Effects of Sasobit® Content on the Rheological Characteristics of Unaged and Aged Asphalt Binders at High and Intermediate Temperatures

Ali Jamshidi et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2012)

Article Construction & Building Technology

Epoxy Modified Open-graded Porous Asphalt

Philip Herrington et al.

Road Materials and Pavement Design (2012)

Article Construction & Building Technology

Performance evaluation of a lightweight epoxy asphalt mixture for bascule bridge pavements

Zhendong Qian et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Polymer Science

Effects of epoxy resin contents on the rheological properties of epoxy-asphalt blends

Cong Peiliang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

Article Materials Science, Characterization & Testing

Optimization of antenna configuration in multiple-frequency ground penetrating radar system for railroad substructure assessment

Imad Al-Qadi et al.

NDT & E INTERNATIONAL (2010)

Article Construction & Building Technology

Investigation of the properties of asphalt and its mixtures containing flame retardant modifier

Jianying Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Article Energy & Fuels

Improvement of bitumen performance with epoxy resin

Meltem Cubuk et al.

Article Polymer Science

Laboratory Investigation of the Properties of Asphalt Modified with Epoxy Resin

Jianying Yu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Article Engineering, Civil

Strategies for Design and Construction of High-Reflectance Asphalt Pavements

Nam Tran et al.

TRANSPORTATION RESEARCH RECORD (2009)

Article Construction & Building Technology

Laboratory investigation of the properties of asphalt and its mixtures modified with flame retardant

Peiliang Cong et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Article Engineering, Civil

Mean profile depth of pavement surface macrotexture using photometric stereo techniques

Amin El Gendy et al.

JOURNAL OF TRANSPORTATION ENGINEERING (2007)

Article Construction & Building Technology

Evaluating skid resistance of different asphalt concrete mixes

Ibrahim M. Asi

BUILDING AND ENVIRONMENT (2007)

Article Energy & Fuels

Effect of process parameters on bitumen emulsions

JP Gingras et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2005)