Journal
RENEWABLE ENERGY
Volume 189, Issue -, Pages 1007-1019Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.renene.2022.03.077
Keywords
Densification; agro-industrial waste; bio-oil; biochar; pyrolysis
Funding
- CAPES (Coordination for the Improvement of Higher Education Personnel)
- CNPq (National Council for Scientific and Technological Development)
- FAPEMIG (Research Support Foundation of Minas Gerais state)
Ask authors/readers for more resources
This study evaluates the properties of briquettes made from coffee husks with the addition of kraft lignin to produce high-quality solid biofuels. It also analyzes the feasibility of converting these briquettes into co-products with higher energy value through pyrolysis. The results show that briquettes with 50% kraft lignin have higher density and compressive strength. The pyrolysis process at different temperatures produces different biochar and bio-oil products. The thermochemical process improves the chemical and energetic properties of the biochar.
The objective of the study was to evaluate the properties of briquettes produced with coffee husks with the addition of kraft lignin for the production of solid biofuels of high physical-mechanical and energetic quality and to analyze the feasibility of converting these briquettes into co-products with higher energy value at from the pyrolysis process. The ratios of kraft lignin to the coffee husk mass were: 10%, 20% and 50%. The briquetting was performed at temperature 120 degrees C and at a pressure of 15 MPa for 15 min. The physical mechanical characteristics such as apparent density and compressive strength were determined. Slow pyrolysis was performed in 350 degrees C, 400 degrees C and 450 degrees C at a heating rate of 5 degrees C/min; the final residence time was 1 h. The product yields were calculated at the end of the pyrolysis process. The chemical compounds present in the bio-oil were identified by gas chromatography mass spectrometry (GC-MS) and the biochar was evaluated for proximate analysis, higher heating value (HHV) and Fourier transform infrared spectroscopy with total reflectance attenuated (FTIR-ATR). The briquettes produced with 50% of lignin kraft showed higher apparent density and compressive strength. The pyrolysis performed at 350 degrees C of the briquettes with 50% lignin favored the production of biochar, on the other hand the pyrolysis performed at 350 degrees C of the briquettes with 10% lignin provided a higher bio-oil yield. In the bio-oil obtained in the pyrolysis at 400 degrees C of briquettes with 50% lignin kraft, the greatest production of phenolic compounds occurred. On the other hand, the greatest yield of nitrogen compounds (caffeine) occurred in pyrolysis at 350 degrees C of briquettes with 20% kraft lignin. The chemical and energetic properties of biochars did not vary considerably in the studied pyrolysis temperature ranges. However, the use of the thermochemical process enhanced the energetic properties and the FTIR analysis showed that biochars have become more aromatic and carbonaceous, in relation to the raw agro-industrial residues. It is concluded that the combination of the different agro-industrial residues (coffee husk and kraft lignin) can offer a sustainable solution for part of the energy scenario, considering that both the properties of the briquettes and the characteristics of the pyrolysis products have been improved. (C) 2022 Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available