Related references
Note: Only part of the references are listed.Enzyme-Degradable 3D Multi-Material Microstructures
David Graefe et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Multimaterial Vat Polymerization Additive Manufacturing
Kathleen L. Sampson et al.
ACS APPLIED POLYMER MATERIALS (2021)
Designing Gelatin Methacryloyl (GelMA)-Based Bioinks for Visible Light Stereolithographic 3D Biofabrication
Hitendra Kumar et al.
MACROMOLECULAR BIOSCIENCE (2021)
The role of polymer mechanochemistry in responsive materials and additive manufacturing
Maroun Abi Ghanem et al.
NATURE REVIEWS MATERIALS (2021)
Injectable hydrogel derived from chitosan with tunable mechanical properties via hybrid-crosslinking system
Jeong Wook Seo et al.
CARBOHYDRATE POLYMERS (2021)
Quantum Photoinitiators: Toward Emerging Photocuring Applications
Nir Waiskopf et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)
A Simple Photochemical Route to Hyperbranched Polymers by Using Photolatent Inimer
Semira Bener et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2021)
Sustainable Photopolymers in 3D Printing: A Review on Biobased, Biodegradable, and Recyclable Alternatives
Vincent S. D. Voet et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2021)
Cell-Free Bilayered Porous Scaffolds for Osteochondral Regeneration Fabricated by Continuous 3D-Printing Using Nascent Physical Hydrogel as Ink
Jingming Gao et al.
ADVANCED HEALTHCARE MATERIALS (2021)
Recent advances in recyclable thermosets and thermoset composites based on covalent adaptable networks
Yihe Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Collagen-Based Thiol-Norbornene Photoclick Bio-Ink with Excellent Bioactivity and Printability
Kai Guo et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Heterolytic Bond Cleavage in a Scissile Triarylmethane Mechanophore
James R. Hemmer et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)
Mechanochemical Reactions of Bis(9-methylphenyl-9-fluorenyl) Peroxides and Their Applications in Cross-Linked Polymers
Yi Lu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)
Thiol-terminated hyperbranched polymer for DLP 3D printing: Performance evaluation of a low shrinkage photosensitive resin
Songyi Li et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Highly porous tissue scaffolds based on cyclic acetals with tunable hydrophilicity and degradation behavior
Kemin Wang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2021)
BPA Replacement Compounds: Current Status and Perspectives
Zuowei Ji et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Photoinduced Free Radical Promoted Cationic RAFT Polymerization toward Living 3D Printing
Bowen Zhao et al.
ACS MACRO LETTERS (2021)
Healable and Rearrangeable Networks of Liquid Crystal Elastomers Enabled by Diselenide Bonds
Ling Chen et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Camphoric acid as renewable cyclic building block for bio-based UV-curing polyhexylene itaconate
Rim Ouhichi et al.
EUROPEAN POLYMER JOURNAL (2021)
Isoprene Soya Diels-Alder Adduct and Epoxidation for Photopolymerization
Xiaofeng Ren et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2021)
Recent advances in 3D printing with protein-based inks
Xuan Mu et al.
PROGRESS IN POLYMER SCIENCE (2021)
Thiol-Rich Multifunctional Macromolecular Crosslinker for Gelatin-Norbornene-Based Bioprinting
Cailing Zhao et al.
BIOMACROMOLECULES (2021)
A review of dental composites: Challenges, chemistry aspects, filler influences, and future insights
Alireza Aminoroaya et al.
COMPOSITES PART B-ENGINEERING (2021)
Mechano-Actuated Light-Responsive Main-Chain Liquid Crystal Elastomers
Eun-hye Cho et al.
MACROMOLECULES (2021)
Wavelength-selective light-matter interactions in polymer science
Pengtao Lu et al.
MATTER (2021)
N-Aryl glycines as versatile initiators for various polymerizations
H. Lai et al.
POLYMER CHEMISTRY (2021)
Photopolymerization of difunctional cyclopolymerizable monomers with low shrinkage behavior
Larissa Alena Ruppitsch et al.
JOURNAL OF POLYMER SCIENCE (2021)
Building biobased, degradable, flexible polymer networks from vanillin via thiol-ene click photopolymerization
Meiying Ge et al.
POLYMER CHEMISTRY (2021)
Additive Manufacturing of Bovine Serum Albumin-Based Hydrogels and Bioplastics
Patrick T. Smith et al.
BIOMACROMOLECULES (2020)
Photocross-linked polymers based on plant-derived monomers for potential application in optical 3D printing
Migle Lebedevaite et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Contemporary catalyst-free photochemistry in synthetic macromolecular science
Bryan T. Tuten et al.
PROGRESS IN POLYMER SCIENCE (2020)
Synthesis, Characterization, and 3D Printing of an Isosorbide-Based, Light-Curable, Degradable Polymer for Potential Application in Maxillofacial Reconstruction
Nazanin Owji et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
Designing with Light: Advanced 2D, 3D, and 4D Materials
Kenward Jung et al.
ADVANCED MATERIALS (2020)
Liquid Crystal Networks on Thermoplastics: Reprogrammable Photo-Responsive Actuators
Rob C. P. Verpaalen et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)
Preparation and evaluation of a BisGMA-free dental composite resin based on a novel trimethacrylate monomer
Alma Antonia Perez-Mondragon et al.
DENTAL MATERIALS (2020)
Development of Bis-GMA-free biopolymer to avoid estrogenicity
Soo-Kyung Jun et al.
DENTAL MATERIALS (2020)
Multifunctional monomer acts as co-initiator and crosslinker to provide autonomous strengthening with enhanced hydrolytic stability in dental adhesives
Linyong Song et al.
DENTAL MATERIALS (2020)
Making organic coatings greener: Renewable resource, solvent-free synthesis, UV curing and repairability
Shuaipeng Wang et al.
EUROPEAN POLYMER JOURNAL (2020)
Facile synthesis of a castor oil-based hyperbranched acrylate oligomer and its application in UV-curable coatings
Daidong Wei et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Photoinduced Proton-Transfer Polymerization: A Practical Synthetic Tool for Soft Lithography Applications
Hyunki Yeo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)
Single-Crystal Polycationic Polymers Obtained by Single-Crystal-to-Single-Crystal Photopolymerization
Qing-Hui Guo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)
UV-Curable Biobased Polyacrylates Based on a Multifunctional Monomer Derived from Furfural
Jules Stouten et al.
MACROMOLECULES (2020)
Next-generation polymers: Isosorbide as a renewable alternative
Derek J. Saxon et al.
PROGRESS IN POLYMER SCIENCE (2020)
From Silk Spinning to 3D Printing: Polymer Manufacturing using Directed Hierarchical Molecular Assembly
Xuan Mu et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Khoon S. Lim et al.
CHEMICAL REVIEWS (2020)
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Claire Yu et al.
CHEMICAL REVIEWS (2020)
Orthogonally Bimetallized Phosphane-ene Photopolymer Networks
Vanessa A. Beland et al.
CHEMISTRY-A EUROPEAN JOURNAL (2020)
Highly Elastic Slide-Ring Hydrogel with Good Recovery as Stretchable Supercapacitor
Li Feng et al.
CHEMISTRY-A EUROPEAN JOURNAL (2020)
Direct Conversion of McDonald's Waste Cooking Oil into a Biodegradable High-Resolution 3D-Printing Resin
Bing Wu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Alternative monomer for BisGMA-free resin composites formulations
Ana P. Fugolin et al.
DENTAL MATERIALS (2020)
Vat photopolymerization of liquid, biodegradable PLGA-based oligomers as tissue scaffolds
Emily M. Wilts et al.
EUROPEAN POLYMER JOURNAL (2020)
Novel self-initiating UV-curable acrylate monomers
Yuquan Zhao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Direct-write 3D printing and characterization of a GelMA-based biomaterial for intracorporeal tissue
A. Asghari Adib et al.
BIOFABRICATION (2020)
Highly reactive novel biobased cycloaliphatic epoxy resins derived from nopol and a study of their cationic photopolymerization
Ricardo Acosta Ortiz et al.
JOURNAL OF POLYMER RESEARCH (2020)
UV-Induced Cationic Ring-Opening Polymerization of 2-Oxazolines for Hot Lithography
Nicolas Klikovits et al.
ACS MACRO LETTERS (2020)
Biodegradable β-Cyclodextrin Conjugated Gelatin Methacryloyl Microneedle for Delivery of Water-Insoluble Drug
Xingwu Zhou et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Water-Soluble Photoinitiators in Biomedical Applications
Wiktoria Tomal et al.
POLYMERS (2020)
Advances in the Research of Bioinks Based on Natural Collagen, Polysaccharide and Their Derivatives for Skin 3D Bioprinting
Jie Xu et al.
POLYMERS (2020)
Three-Dimensional Printing Fully Biobased Heat-Resistant Photoactive Acrylates from Aliphatic Biomass
Jia-Tao Miao et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Thioxanthone-Based Photobase Generators for the Synthesis of Polyurethanes via the Photopolymerization of Polyols and Polyisocyanates
Nicolas Zivic et al.
MACROMOLECULES (2020)
Sustainable Materials and Chemical Processes for Additive Manufacturing
Eva Sanchez-Rexach et al.
CHEMISTRY OF MATERIALS (2020)
Uniaxially Oriented and Polymerized Chromonic Nanocolumns for Redox-Responsive Smart Glass
Dong-Gue Kang et al.
CHEMISTRY OF MATERIALS (2020)
Facile synthesis of bio-based reactive flame retardant from vanillin and guaiacol for epoxy resin
Jingkai Liu et al.
COMPOSITES PART B-ENGINEERING (2020)
Reprocessable Cross-Linked Polymer Networks: Are Associative Exchange Mechanisms Desirable?
Benjamin R. Elling et al.
ACS CENTRAL SCIENCE (2020)
Self-healing polymers
Siyang Wang et al.
NATURE REVIEWS MATERIALS (2020)
Noninvasive in vivo 3D bioprinting
Yuwen Chen et al.
SCIENCE ADVANCES (2020)
Light-Activated Olefin Metathesis: Catalyst Development, Synthesis, and Applications
Or Eivgi et al.
ACCOUNTS OF CHEMICAL RESEARCH (2020)
Synthesis and Characterization of Poly(limonene) by Photoinduced Controlled Radical Polymerization
Edison Rogerio Marques de Oliveira et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)
Low-Viscosity Limonene Dimethacrylate as a Bio-Based Alternative to Bisphenol A-Based Acrylic Monomers for Photocurable Thermosets and 3D Printing
Vitalij Schimpf et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2020)
Multiacrylated Cyclodextrin: A Bio-Derived Photocurable Macromer for VAT 3D Printing
Andrea Cosola et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2020)
Natural polymers-based light-induced hydrogels: Promising biomaterials for biomedical applications
Hadi Samadian et al.
COORDINATION CHEMISTRY REVIEWS (2020)
Self-healing UV-curable polymer network with reversible Diels-Alder bonds for applications in ambient conditions
Dorothee Ehrhardt et al.
POLYMER (2020)
Photo-crosslinked Non-Isocyanate Polyurethane Acrylate (NIPUA) coatings through a transurethane polycondensation approach
Pierre Boisaubert et al.
POLYMER (2020)
Effect of ethanol treatment on physical property of photopolymerized hyaluronic acid/silk fibroin hybrid hydrogel
J. Ryoo et al.
POLYMER (2020)
Visible light photoinitiating systems by charge transfer complexes: Photochemistry without dyes
Patxi Garra et al.
PROGRESS IN POLYMER SCIENCE (2020)
Photo-crosslinked coatings from an acrylate terminated non-isocyanate polyurethane (NIPU) and reactive diluent
Pierre Boisaubert et al.
EUROPEAN POLYMER JOURNAL (2020)
Recent advances on iron-based photoinitiators of polymerization
Frederic Dumur
EUROPEAN POLYMER JOURNAL (2020)
A Bio-Based Resin for a Multi-Scale Optical 3D Printing
Edvinas Skliutas et al.
SCIENTIFIC REPORTS (2020)
Thermally Reversible Diels-Alder Bond-Containing Acrylate Networks Showing Improved Lifetime
Eveline E. L. Maassen et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2020)
N-Acyl Dibenzazepine Chemistry as Versatile Approach for Photoreversible Thiol-Ene Networks
Semira Bener et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2020)
Organocatalyzed Photoredox Radical Ring-Opening Polymerization of Functionalized Vinylcyclopropanes
Dian-Feng Chen et al.
MACROMOLECULES (2020)
Revival of Cyclopolymerizable Monomers as Low-Shrinkage Cross-Linkers
Gernot Peer et al.
MACROMOLECULES (2020)
Green light triggered [2+2] cycloaddition of halochromic styrylquinoxaline-controlling photoreactivity by pH
Kubra Kalayci et al.
NATURE COMMUNICATIONS (2020)
Moving Towards a Finer Way of Light-Cured Resin-Based Restorative Dental Materials: Recent Advances in Photoinitiating Systems Based on Iodonium Salts
Monika Topa et al.
MATERIALS (2020)
Covalent Adaptable Network and Self-Healing Materials: Current Trends and Future Prospects in Sustainability
Ajmir Khan et al.
POLYMERS (2020)
Hempseed Oil-Based Covalent Adaptable Epoxy-Amine Network and Its Potential Use for Room-Temperature Curable Coatings
Shuai Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Visible Light-Induced 3D Bioprinting Technologies and Corresponding Bioink Materials for Tissue Engineering: A Review
Zizhuo Zheng et al.
Engineering (2020)
Preparation and properties of UV-curable diamine-based polyurethane acrylate hard coatings
Junchao Fu et al.
APPLIED SURFACE SCIENCE (2020)
Renewable epoxy thermosets with extremely high biomass content from furan derivatives and their flame retardancy
Hee-Woong Park et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)
Evaluation of new coinitiators of camphorquinone useful in the radical photopolymerization of dental monomers
Alma Antonia Perez-Mondragon et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2020)
Xolography for linear volumetric 3D printing
Martin Regehly et al.
NATURE (2020)
Synthesis and characterization of photocrosslinkable albumin-based hydrogels for biomedical applications
Darlin Lantigua et al.
SOFT MATTER (2020)
Epoxy-functionalised 4-vinylguaiacol for the synthesis of bio-based, degradable star polymers via a RAFT/ROCOP strategy
Thomas M. McGuire et al.
POLYMER CHEMISTRY (2020)
Cycloaliphatic epoxidized ionic liquids as new versatile monomers for the development of shape memory PIL networks by 3D printing
Alexei Radchenko et al.
POLYMER CHEMISTRY (2020)
Near infraredphotopolymer for micro-optics applications
Ihab Dika et al.
JOURNAL OF POLYMER SCIENCE (2020)
Exploration of Bio-Based Functionalized Sucrose Ester Resins for Additive Manufacturing via Stereolithography
Samantha D. Silbert et al.
ACS APPLIED POLYMER MATERIALS (2020)
Confined polymerisation of bis-thyminyl monomers within nanoreactors: towards molecular weight control
Yanallah Alqarni et al.
POLYMER CHEMISTRY (2020)
Recent advances in light-regulated non-radical polymerisations
Haiwang Lai et al.
CHEMICAL SOCIETY REVIEWS (2020)
Visible light-mediated ring-opening polymerization of lactones based on the excited state acidity of ESPT molecules
Xun Zhang et al.
POLYMER CHEMISTRY (2020)
A fully biomass based monomer from itaconic acid and eugenol to build degradable thermosets via thiol-ene click chemistry
Yazhou Tian et al.
GREEN CHEMISTRY (2020)
Photopolymer Resins with Biobased Methacrylates Based on Soybean Oil for Stereolithography
Jarno Guit et al.
ACS APPLIED POLYMER MATERIALS (2020)
Oxygen Tolerant PET-RAFT Facilitated 3D Printing of Polymeric Materials under Visible LEDs
Ali Bagheri et al.
ACS APPLIED POLYMER MATERIALS (2020)
Photoinduced free radical promoted cationic polymerization 40 years after its discovery
Mehmet Atilta Tasdelen et al.
POLYMER CHEMISTRY (2020)
Harnessing the Chemical Diversity of the Natural Product Magnolol for the Synthesis of Renewable, Degradable Neolignan Thermosets with Tunable Thermomechanical Characteristics and Antioxidant Activity
Kevin T. Wacker et al.
BIOMACROMOLECULES (2019)
Enzymatically Synthesized Vinyl Ether-Disulfide Monomer Enabling an Orthogonal Combination of Free Radical and Cationic Chemistry toward Sustainable Functional Networks
Sara Brannstrom et al.
BIOMACROMOLECULES (2019)
Physical properties and cytotoxicity of antimicrobial dental resin adhesives containing dimethacrylate oligomers of Ciprofloxacin and Metronidazole
Yasaman Delauiz et al.
DENTAL MATERIALS (2019)
Photoreversible Smart Polymers Based on 2π+2π Cycloaddition Reactions: Nanofilms to Self-Healing Films
Mustafa Abdallh et al.
MACROMOLECULES (2019)
Volumetric additive manufacturing via tomographic reconstruction
Brett E. Kelly et al.
SCIENCE (2019)
3D Printing of Silk Fibroin for Biomedical Applications
Qiusheng Wang et al.
MATERIALS (2019)
Silyl glyoxylates as high-performance photoinitiators for cationic and hybrid polymerizations: Towards better polymer mechanical properties
Julie Kirschner et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2019)
Visible-Light-Controlled Ruthenium-Catalyzed Olefin Metathesis
Cedric Theunissen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Effect of the resin viscosity on the writing properties of two-photon polymerization
T. Zandrini et al.
OPTICAL MATERIALS EXPRESS (2019)
Flame retardant eugenol-based thiol-ene polymer networks with high mechanical strength and transparency
Tao Liu et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Development and status of resin composite as dental restorative materials
Xinxuan Zhou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Controlling Polymer Composition in Organocatalyzed Photoredox Radical Ring-Opening Polymerization of Vinylcyclopropanes
Dian-Feng Chen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Research progress of UV-curable polyurethane acrylate-based hardening coatings
Junchao Fu et al.
PROGRESS IN ORGANIC COATINGS (2019)
Fast self-healing engineered by UV-curable polyurethane contained Diels-Alder structure
Zhengyue Wang et al.
PROGRESS IN ORGANIC COATINGS (2019)
Simultaneous initiation of radical and cationic polymerization reactions using the G1 copper complex as photoredox catalyst: Applications of free radical/cationic hybrid photopolymerization in the composites and 3D printing fields
H. Mokbel et al.
PROGRESS IN ORGANIC COATINGS (2019)
Photoinitiated Copper(I)-Catalyzed Azide-Alkyne Cycloaddition Reaction for Ion Conductive Networks
Bassil El-Zaatari et al.
ACS MACRO LETTERS (2019)
Osteochondral Regeneration with 3D-Printed Biodegradable High-Strength Supramolecular Polymer Reinforced-Gelatin Hydrogel Scaffolds
Fei Gao et al.
ADVANCED SCIENCE (2019)
Synthesis and Properties of UV-Curable Polyfunctional Polyurethane Acrylate Resins from Cardanol
Yun Hu et al.
ACS OMEGA (2019)
Synthesis of chemically modified BisGMA analog with low viscosity and potential physical and biological properties for dental resin composite
Abdel-Basit Al-Odayni et al.
DENTAL MATERIALS (2019)
Photo-cross-linking: A powerful and versatile strategy to develop shape-memory polymers
Hui Xie et al.
PROGRESS IN POLYMER SCIENCE (2019)
New Reactive Isoeugenol Based Phosphate Flame Retardant: Toward Green Epoxy Resins
Sylvie Pourchet et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Light to Shape the Future: From Photolithography to 4D Printing
Esus del Barrio et al.
ADVANCED OPTICAL MATERIALS (2019)
Photodeformable Azobenzene-Containing Liquid Crystal Polymers and Soft Actuators
Xinlei Pang et al.
ADVANCED MATERIALS (2019)
A Versatile 3D and 4D Printing System through Photocontrolled RAFT Polymerization
Zhiheng Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Polymer networks based on photo-caged diene dimerization
Tim Krappitz et al.
MATERIALS HORIZONS (2019)
Hybrid Photo-induced Copolymerization of Ring-Strained and Vinyl Monomers Utilizing Metal-Free Ring-Opening Metathesis Polymerization Conditions
Tim Krappitz et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Thermal Metamorphosis in (Meth)acrylate Photopolymers: Stress Relaxation, Reshaping, and Second-Stage Reaction
Maciej Podgorski et al.
MACROMOLECULES (2019)
Characterization of Ultraviolet-Cured Methacrylate Networks: From Photopolymerization to Ultimate Mechanical Properties
R. Anastasio et al.
MACROMOLECULES (2019)
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Jana Herzberger et al.
PROGRESS IN POLYMER SCIENCE (2019)
Print Me An Organ! Why We Are Not There Yet
Wei Long Ng et al.
PROGRESS IN POLYMER SCIENCE (2019)
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
David A. Walker et al.
SCIENCE (2019)
New silyl-functionalized BisGMA provides autonomous strengthening without leaching for dental adhesives
Linyong Song et al.
ACTA BIOMATERIALIA (2019)
β-Carotene/Limonene Derivatives/Eugenol: Green Synthesis of Antibacterial Coatings under Visible-Light Exposure
Louise Breloy et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Dynamic Covalent Bonds in Polymeric Materials
Progyateg Chakma et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Multiphoton 3D Printing of Biopolymer-Based Hydrogels
Kostas Parkatzidis et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Biomimetic 3D-printed scaffolds for spinal cord injury repair
Jacob Koffler et al.
NATURE MEDICINE (2019)
High-Performance Lignin-Based Water-Soluble Macromolecular Photoinitiator for the Fabrication of Hybrid Hydrogel
Yuan Liu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Enhancement of Biological Properties of Photoinduced Biobased Networks by Post-Functionalization with Antibacterial Molecule
Tina Modjinou et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Progress in the development of polymeric and multifunctional photoinitiators
Junyi Zhou et al.
PROGRESS IN POLYMER SCIENCE (2019)
Reprogrammable recovery and actuation behaviour of shape-memory polymers
Andreas Lendlein et al.
NATURE REVIEWS MATERIALS (2019)
A Guide through the Dental Dimethacrylate Polymer Network Structural Characterization and Interpretation of Physico-Mechanical Properties
Izabela Maria Barszczewska-Rybarek
MATERIALS (2019)
Hydrolytically degradable poly(β-thioether ester ketal) thermosets via radical-mediated thiol-ene photopolymerization
Benjamin M. Alameda et al.
POLYMER CHEMISTRY (2019)
Sustainable near UV-curable acrylates based on natural phenolics for stereolithography 3D printing
Rui Ding et al.
POLYMER CHEMISTRY (2019)
Combining a ligand photogenerator and a Ru precatalyst: a photoinduced approach to cross-linked ROMP polymer films
Thi Kim Hoang Trinh et al.
RSC ADVANCES (2019)
Study on a polymerizable visible light initiator for fabrication of biosafety materials
Xing Huang et al.
POLYMER CHEMISTRY (2019)
An Antimicrobial Dental Light Curable Bioadhesive Hydrogel for Treatment of Peri-Implant Diseases
Ehsan Shirzaei Sani et al.
MATTER (2019)
Degradable Thermoset Fibers from Carbohydrate-Derived Diols via Thiol-Ene Photopolymerization
Sung-Soo Kim et al.
ACS APPLIED POLYMER MATERIALS (2019)
Photo Processing for Biomedical Hydrogels Design and Functionality: A Review
Hongyi Yao et al.
POLYMERS (2018)
Gelatin-Based Photocurable Hydrogels for Corneal Wound Repair
Lingli Li et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Photoreversible Covalent Hydrogels for Soft-Matter Additive Manufacturing
Christopher P. Kabb et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Novel Materials for 3D Printing by Photopolymerization
Michael Layani et al.
ADVANCED MATERIALS (2018)
Counting the Clicks in Fluorescent Polymer Networks
Diego Estupinan et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Recent Advances in Germanium-Based Photoinitiator Chemistry
Michael Haas et al.
CHEMISTRY-A EUROPEAN JOURNAL (2018)
Synthesis and characterization of Ciprofloxacin-containing divinyl oligomers and assessment of their biodegradation in simulated salivary esterase
Yasaman Delaviz et al.
DENTAL MATERIALS (2018)
Preparation and characterization of Bis-GMA-free dental composites with dimethacrylate monomer derived from 9,9-Bis[4-(2-hydroxyethoxy)phenyl]fluorene
Jingwei He et al.
DENTAL MATERIALS (2018)
Photomechanical effects in liquid crystalline polymer networks and elastomers
Timothy J. White
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2018)
Degradable and renewably-sourced poly(ester-thioethers) by photo-initiated thiol-ene polymerization
Leon M. Lillie et al.
POLYMER CHEMISTRY (2018)
Fast photopolymerization of acrylate coatings: Achievements and problems
Igor V. Khudyakov
PROGRESS IN ORGANIC COATINGS (2018)
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Soon Hee Kim et al.
NATURE COMMUNICATIONS (2018)
Reprocessable thermosets for sustainable three-dimensional printing
Biao Zhang et al.
NATURE COMMUNICATIONS (2018)
Photoactivation of Ruthenium Phosphite Complexes for Olefin Metathesis
Or Eivgi et al.
ACS CATALYSIS (2018)
Wavelength-Selective Coupling and Decoupling of Polymer Chains via Reversible [2+2] Photocycloaddition of Styrylpyrene for Construction of Cytocompatible Photodynamic Hydrogels
Vinh X. Truong et al.
ACS MACRO LETTERS (2018)
Water-Phase Synthesis of a Biobased Allyl Compound for Building UV-Curable Flexible Thiol Ene Polymer Networks with High Mechanical Strength and Transparency
Jia-Tao Miao et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
High-Performance Soybean-Oil-Based Epoxy Acrylate Resins: Green Synthesis and Application in UV-Curable Coatings
Qiong Wu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Soybean Oil-Based Thermoset Films and Fibers with High Biobased Carbon Content via Thiol-Ene Photopolymerization
Sung-Soo Kim et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Anisotropic Thermal Interface Materials: Directional Heat Transfer in Uniaxially Oriented Liquid Crystal Networks
Dong-Gue Kang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Lignin-Containing Photoactive Resins for 3D Printing by Stereolithography
Jordan T. Sutton et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Understanding and Improving Mechanical Properties in 3D printed Parts Using a Dual-Cure Acrylate-Based Resin for Stereolithography
Asais Camila Uzcategui et al.
ADVANCED ENGINEERING MATERIALS (2018)
Self-healing mechanisms in smart protective coatings: A review
Fan Zhang et al.
CORROSION SCIENCE (2018)
Reducing volumetric shrinkage of photopolymerizable materials using reversible disulfide-bond reactions
Jiangtao Chen et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Characterization of silk hydrogel formed with hydrolyzed silk fibroin-methacrylate via photopolymerization
H. H. Kim et al.
POLYMER (2018)
Multi-Stimuli-Responsive Polymer Particles, Films, and Hydrogels for Drug Delivery
Xiao Fu et al.
CHEM (2018)
Photopolymerization of Cyclopolymerizable Monomers and Their Application in Hot Lithography
Gernot Peer et al.
MACROMOLECULES (2018)
Ultrafast Epoxy-Amine Photopolyaddition
Patxi Garra et al.
MACROMOLECULES (2018)
Exploiting Wavelength Orthogonality for Successive Photoinduced Polymerization-Induced Self-Assembly and Photo-Crosslinking
Sihao Xu et al.
ACS MACRO LETTERS (2018)
Disulfone Cross-Linkers for λ-Orthogonal Photoinduced Curing and Degradation of Polymeric Networks
Alexander M. Schenzel et al.
ACS MACRO LETTERS (2017)
Castor Oil Based Biothiol as a Highly Stable and Self-Initiated Oligomer for Photoinitiator-Free UV Coatings
Qing Wang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Fluorinated bis-GMA as potential monomers for dental restorative composite materials
Rohit Srivastava et al.
EUROPEAN POLYMER JOURNAL (2017)
Preparation of 2,5-bis(methylallyl thioester)-thiadiazole with high refractive index and its coatings
Shuqian Zhou et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2017)
Synthesis and characterization of a novel resin monomer with low viscosity
Lihua Hong et al.
JOURNAL OF DENTISTRY (2017)
Substituent Effects on the pH Sensitivity of Acetals and Ketals and Their Correlation with Encapsulation Stability in Polymeric Nanogels
Bin Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Eugenol-Derived Biobased Epoxy: Shape Memory, Repairing, and Recyclability
Tuan Liu et al.
MACROMOLECULES (2017)
Monomer design strategies to create natural product-based polymer materials
Samantha L. Kristufek et al.
NATURAL PRODUCT REPORTS (2017)
Self-initiation of UV photopolymerization reactions using tetrahalogenated bisphenol A (meth)acrylates
Theophile Pelras et al.
PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES (2017)
Photopolymerization of hybrid monomers Part I: Comparison of the performance of selected photoinitiators in cationic and free-radical polymerization of hybrid monomers
Damian Nowak et al.
POLYMER TESTING (2017)
Novel polymerizable HMPP-type photoinitiator with carbamate; Synthesis and photoinitiating behaviors
S. Liang et al.
PROGRESS IN ORGANIC COATINGS (2017)
Photoinitiating systems for cationic photopolymerization: Ongoing push toward long wavelengths and low light intensities
Suqing Shi et al.
PROGRESS IN POLYMER SCIENCE (2017)
Self-Reporting Fluorescent Step-Growth RAFT Polymers Based on Nitrile Imine-Mediated Tetrazole-ene Cycloaddition Chemistry
Diego Estupinan et al.
ACS MACRO LETTERS (2017)
Versatile Bioorthogonal Hydrogel Platform by Catalyst-Free Visible Light Initiated Photodimerization of Anthracene
Vinh X. Truong et al.
ACS MACRO LETTERS (2017)
Pro-Antimicrobial Networks via Degradable Acetals (PANDAs) Using Thiol-Ene Photopolymerization
Dahlia N. Amato et al.
ACS MACRO LETTERS (2017)
Visible-Light Induced Thiol-Ene Reaction on Natural Lignin
Hailing Liu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Renewable Thiol-Ene Thermosets Based on Refined and Selectively Allylated Industrial Lignin
Marcus Jawerth et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
In vitro and in vivo analysis of visible light crosslinkable gelatin methacryloyl (GelMA) hydrogels
Iman Noshadi et al.
BIOMATERIALS SCIENCE (2017)
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
Greeshma Ratheesh et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
Greeshma Ratheesh et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Cross-Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-Photon Polymerization Potential
Jasper van Hoorick et al.
BIOMACROMOLECULES (2017)
Intrinsic self-healing polymers with a high E-modulus based on dynamic reversible urea bonds
Stefan Zechel et al.
NPG ASIA MATERIALS (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Cationic Polymerization: From Photoinitiation to Photocontrol
Quentin Michaudel et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Anti-Caries Effects of Dental Adhesives Containing Quaternary Ammonium Methacrylates with Different Chain Lengths
Qi Han et al.
MATERIALS (2017)
Mechanoresponsive materials for drug delivery: Harnessing forces for controlled release
Julia Wang et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
Radical Ring-Opening Polymerization: Scope, Limitations, and Application to (Bio)Degradable Materials
Antoine Tardy et al.
CHEMICAL REVIEWS (2017)
Design and synthesis of bio-based UV curable PU acrylate resin from itaconic acid for coating applications
Deepak M. Patil et al.
DESIGNED MONOMERS AND POLYMERS (2017)
Flexible and Patterned Thin Film Polarizer: Photopolymerization of Peryl-ene-based Lyotropic Chromonic Reactive Mesogens
Pureun Im et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Photoresponsive Liquid Crystalline Epoxy Networks with Shape Memory Behavior and Dynamic Ester Bonds
Yuzhan Li et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Initiatorless Photopolymerization of Liquid Crystal Monomers
Kyung Min Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Biocatalytic Synthesis of Epoxy Resins from Fatty Acids as a Versatile Route for the Formation of Polymer Thermosets with Tunable Properties
Susana Torron et al.
BIOMACROMOLECULES (2016)
Catalyst free visible light induced cycloaddition as an avenue for polymer ligation
Paul Lederhose et al.
CHEMICAL COMMUNICATIONS (2016)
A sustainable, eugenol-derived epoxy resin with high biobased content, modulus, hardness and low flammability: Synthesis, curing kinetics and structure-property relationship
Jintao Wan et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Ring-Opening Copolymerization of Epoxides and Cyclic Anhydrides with Discrete Metal Complexes: Structure-Property Relationships
Julie M. Longo et al.
CHEMICAL REVIEWS (2016)
Light-Controlled Radical Polymerization: Mechanisms, Methods, and Applications
Mao Chen et al.
CHEMICAL REVIEWS (2016)
Photoinduced Electron Transfer Reactions for Macromolecular Syntheses
Sajjad Dadashi-Silab et al.
CHEMICAL REVIEWS (2016)
Photocatalysis in organic and polymer synthesis
Nathaniel Corrigan et al.
CHEMICAL SOCIETY REVIEWS (2016)
New acid BisGMA analogs for dental adhesive applications with antimicrobial activity
Violeta Melinte et al.
DENTAL MATERIALS (2016)
Preparation of UV-curable acryl resin for high refractive index based on 1,5-bis(2-acryloylenethyl)-3,4-ethylenedithiothiophene
Hyeonil Kim et al.
EUROPEAN POLYMER JOURNAL (2016)
Lipid-associated oral delivery: Mechanisms and analysis of oral absorption enhancement
Oljora Rezhdo et al.
JOURNAL OF CONTROLLED RELEASE (2016)
A review of shape memory polymers bearing reversible binding groups
Christopher L. Lewis et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2016)
Development of novel photopolymerizable hyaluronic acid/heparin-based hydrogel scaffolds with a controlled release of growth factors for enhanced bone regeneration
Min Soo Bae et al.
MACROMOLECULAR RESEARCH (2016)
Sustainable polymers from renewable resources
Yunqing Zhu et al.
NATURE (2016)
Thermal, mechanical and conductive properties of imidazolium-containing thiol-ene poly(ionic liquid) networks
Taylor C. Rhoades et al.
POLYMER (2016)
Toughening of photo-curable polymer networks: a review
Samuel Clark Ligon-Auer et al.
POLYMER CHEMISTRY (2016)
Multiprocess 3D printing for increasing component functionality
Eric MacDonald et al.
SCIENCE (2016)
Ultrastiff Biobased Epoxy Resin with High Tg and Low Permittivity: From Synthesis to Properties
Jintao Wan et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Design and development of self-healing dental composites
George Huyang et al.
MATERIALS & DESIGN (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
14D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Shida Miao et al.
SCIENTIFIC REPORTS (2016)
Facile Fabrication of Polymerizable Ionic Liquid Based-Gel Beads via Thiol-ene Chemistry
Mona Taghavikish et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
3D-Printable Antimicrobial Composite Resins
Jun Yue et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Preparation of Dental Resins Resistant to Enzymatic and Hydrolytic Degradation in Oral Environments
Andres Gonzalez-Bonet et al.
BIOMACROMOLECULES (2015)
Biobased Epoxy Nanocomposites Derived from Lignin-Based Monomers
Shou Zhao et al.
BIOMACROMOLECULES (2015)
Fluorinated Oligomers and Polymers in Photopolymerization
Alessandra Vitale et al.
CHEMICAL REVIEWS (2015)
Polymer Network Formation Using the Phosphane-ene Reaction: A Thiol-ene Analogue with Diverse Postpolymerization Chemistry
Ryan Guterman et al.
CHEMISTRY OF MATERIALS (2015)
Designing Molecular Printboards: A Photolithographic Platform for Recodable Surfaces
Doris Abt et al.
CHEMISTRY-A EUROPEAN JOURNAL (2015)
Assessments of antibacterial and physico-mechanical properties for dental materials with chemically anchored quaternary ammonium moieties: Thiol–ene–methacrylate vs. conventional methacrylate system
Saeed Beigi Burujeny et al.
DENTAL MATERIALS (2015)
Inhibition of matrix metalloproteinase activity in human dentin via novel antibacterial monomer
Fang Li et al.
DENTAL MATERIALS (2015)
Ester-free thiol-ene dental restoratives-Part A: Resin development
Maciej Podgorski et al.
DENTAL MATERIALS (2015)
Metal-Free Ring-Opening Metathesis Polymerization
Kelli A. Ogawa et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Macroporous Cross linked Polymers with Controlled Structure Fabricated via Low Temperature Phase-Separation Photopolymerization
Ruixue Yin et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Controlled Shape Memory Behavior of a Smectic Main-Chain Liquid Crystalline Elastomer
Yuzhan Li et al.
MACROMOLECULES (2015)
Recent Progress in High Refractive Index Polymers
Tomoya Higashihara et al.
MACROMOLECULES (2015)
High strain epoxy shape memory polymer
Ning Zheng et al.
POLYMER CHEMISTRY (2015)
Shining a light on an adaptable photoinitiator: advances in photopolymerizations initiated by thioxanthones
Sajjad Dadashi-Silab et al.
POLYMER CHEMISTRY (2015)
Photopolymerization upon LEDs: new photoinitiating systems and strategies
Celine Dietlin et al.
POLYMER CHEMISTRY (2015)
Visible light sensitive photoinitiating systems: Recent progress in cationic and radical photopolymerization reactions under soft conditions
Pu Xiao et al.
PROGRESS IN POLYMER SCIENCE (2015)
Allylimidazolium salt based antibacterial polymer coatings produced by thiol-ene photocuring
Mirinae Kim et al.
REACTIVE & FUNCTIONAL POLYMERS (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
A novel biobased epoxy resin with high mechanical stiffness and low flammability: synthesis, characterization and properties
Jintao Wan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Intrinsic high refractive index polymers
Emily K. Macdonald et al.
POLYMER INTERNATIONAL (2015)
Epoxy Monomers Derived from Tung Oil Fatty Acids and Its Regulable Thermosets Cured in Two Synergistic Ways
Kun Huang et al.
BIOMACROMOLECULES (2014)
Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2014)
Four-Membered Ring-Containing Spirocycles: Synthetic Strategies and Opportunities
Erick M. Carreira et al.
CHEMICAL REVIEWS (2014)
Photopolymer Materials and Processes for Advanced Technologies
James V. Crivello et al.
CHEMISTRY OF MATERIALS (2014)
Liquid Crystal Polymer Networks: Preparation, Properties, and Applications of Films with Patterned Molecular Alignment
Danqing Lin et al.
LANGMUIR (2014)
Synthesis and Photopolymerization of Thiol-Modified Triazine-Based Monomers and Oligomers for the Use in Thiol-Ene-Based Dental Composites
Sebastian Reinelt et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2014)
Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomers
Jan Lukaszczyk et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Injectable and bioresponsive hydrogels for on-demand matrix metalloproteinase inhibition
Brendan P. Purcell et al.
NATURE MATERIALS (2014)
Visible light initiating systems for photopolymerization: status, development and challenges
Jianzhong Shao et al.
POLYMER CHEMISTRY (2014)
The power of light in polymer science: photochemical processes to manipulate polymer formation, structure, and properties
Shunsuke Chatani et al.
POLYMER CHEMISTRY (2014)
Preparation and properties of UV-curable di-functional sulfur-containing thioacrylate and thiourethane acrylate monomers with high refractive indices
Jin-Seung Kim et al.
PROGRESS IN ORGANIC COATINGS (2014)
Toughening Elastomers with Sacrificial Bonds and Watching Them Break
Etienne Ducrot et al.
SCIENCE (2014)
Early damage detection in epoxy matrix using cyclobutane-based polymers
Jin Zou et al.
SMART MATERIALS AND STRUCTURES (2014)
A biobased photocurable binder for composites with transparency and thermal stability from biomass-derived isosorbide
Seunghan Shin et al.
RSC ADVANCES (2014)
Photochemical Production of Interpenetrating Polymer Networks; Simultaneous Initiation of Radical and Cationic Polymerization Reactions
Jean Pierre Fouassier et al.
POLYMERS (2014)
Effects of Catalyst Type and Reaction Parameters on One-Step Acrylation of Soybean Oil
Pei Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2014)
Gelatin hydrogels formed by orthogonal thiol-norbornene photochemistry for cell encapsulation
Zachary Munoz et al.
BIOMATERIALS SCIENCE (2014)
Photopolymerization Reactions Using the Photoinitiated Copper (I)-Catalyzed Azide-Alkyne Cycloaddition (CuAAC) Reaction
Tao Gong et al.
ADVANCED MATERIALS (2013)
Digital Microfabrication of User-Defined 3D Microstructures in Cell-Laden Hydrogels
Pranav Soman et al.
BIOTECHNOLOGY AND BIOENGINEERING (2013)
Covalent adaptable networks: smart, reconfigurable and responsive network systems
Christopher J. Kloxin et al.
CHEMICAL SOCIETY REVIEWS (2013)
Unraveling the Pathways to UVA-Induced DNA Photodamage: (6-4) Photoproduct as a Potential Trojan Horse
Hans-Achim Wagenknecht
CHEMPHYSCHEM (2013)
One-step acrylation of soybean oil (SO) for the preparation of SO-based macromonomers
Pei Zhang et al.
GREEN CHEMISTRY (2013)
Synthesis and Characterization of Low Viscosity Dimethacrylic Resin Based on Isosorbide
Jan Lukaszczyk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Volume shrinkage of UV-curable coating formulation investigated by real-time laser reflection method
Yu Jian et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2013)
Preparation and characterization of a photocrosslinkable bioadhesive inspired by marine mussel
Jie Xue et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY (2013)
Stress-Responsive Polymers Containing Cyclobutane Core Mechanophores: Reactivity and Mechanistic Insights
Zachary S. Kean et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
New Thiols for Photoinitiator-Free Thiol-Acrylate Polymerization
Mohamad-Ali Tehfe et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2013)
Preparation and properties of cyclic acetal based biodegradable gel by thiol-ene photopolymerization
Kemin Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Isosorbide-methacrylate as a bio-based low viscosity resin for high performance thermosetting applications
Joshua M. Sadler et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Genetically Encoded Cyclopropene Directs Rapid, Photoclick-Chemistry-Mediated Protein Labeling in Mammalian Cells
Zhipeng Yu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)
Photoinitiated Alkyne-Azide Click and Radical Cross-Linking Reactions for the Patterning of PEG Hydrogels
Rodney T. Chen et al.
BIOMACROMOLECULES (2012)
Investigation on synthesis and properties of isosorbide based bis-GMA analogue
Jan Lukaszczyk et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)
Synthesis of dimethacrylates monomers with low polymerization shrinkage and its application in dental composites materials
Jingwei He et al.
JOURNAL OF POLYMER RESEARCH (2012)
Correlating backbone-to-backbone distance to ionic conductivity in amorphous polymerized ionic liquids
David Salas-de la Cruz et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2012)
Incorporation and Controlled Release of Silyl Ether Prodrugs from PRINT Nanoparticles
Matthew C. Parrott et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Mechanically induced chemiluminescence from polymers incorporating a 1,2-dioxetane unit in the main chain
Yulan Chen et al.
NATURE CHEMISTRY (2012)
Synthesis and properties of new photosensitive triazene and o-nitrobenzene methacrylates
Vincent Gaud et al.
REACTIVE & FUNCTIONAL POLYMERS (2012)
Topochemical photo-reversible polymerization of a bioinspired monomer and its recovery and repolymerization after photo-depolymerization
Priscilla Johnston et al.
CHEMICAL SCIENCE (2012)
All-Organic, Stimuli-Responsive Polymer Composites with Electrospun Fiber Fillers
David A. Stone et al.
ACS MACRO LETTERS (2012)
Clicking Polymers or Just Efficient Linking: What Is the Difference?
Christopher Barner-Kowollik et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Increasing the Efficacy of Bioorthogonal Click Reactions for Bioconjugation: A Comparative Study
Christen Besanceney-Webler et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Biodegradable bio-based polyesters with controllable photo-crosslinkability, thermal and hydrolytic stability
Weifu Dong et al.
JOURNAL OF POLYMER RESEARCH (2011)
Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization
Christian Heller et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2011)
Alkyl-Substituted N-Vinylimidazolium Polymerized Ionic Liquids: Thermal Properties and Ionic Conductivities
Matthew D. Green et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2011)
Cationic versus Neutral Ru-II-N-Heterocyclic Carbene Complexes as Latent Precatalysts for the UV-Induced Ring-Opening Metathesis Polymerization
Dongren Wang et al.
CHEMISTRY-A EUROPEAN JOURNAL (2010)
Does a low-shrinking composite induce less stress at the adhesive interface?
Annelies Van Ende et al.
DENTAL MATERIALS (2010)
Impact of emulsion-based drug delivery systems on intestinal permeability and drug release kinetics
Fulden Buyukozturk et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Highly Refractive Polymer Resin Derived from Sulfur-Containing Aromatic Acrylate
Nam-Ho You et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2010)
Overcoming the Oxygen Inhibition in the Photopolymerization of Acrylates: A Study of the Beneficial Effect of Triphenylphosphine
C. Belon et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2010)
Tunable Bifunctional Silyl Ether Cross-Linkers for the Design of Acid-Sensitive Biomaterials
Matthew C. Parrott et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
[2+2] Cycloadditions by Oxidative Visible Light Photocatalysis
Michael A. Ischay et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Green Chemistry: Sunlight-Induced Cationic Polymerization of Renewable Epoxy Monomers Under Air
Mohamad-Ali Tehfe et al.
MACROMOLECULES (2010)
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
Yusuf Yagci et al.
MACROMOLECULES (2010)
Covalent Adaptable Networks (CANS): A Unique Paradigm in Cross-Linked Polymers
Christopher J. Kloxin et al.
MACROMOLECULES (2010)
Targeted metabolic labeling of yeast N-glycans with unnatural sugars
Mark A. Breidenbach et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
Cationic Ru-II complexes with N-heterocyclic carbene ligands for UV-Induced ring-opening metathesis polymerization
Dongren Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)
Antibacterial activities of naturally occurring compounds against Mycobacterium avium subsp paratuberculosis
Stella Y. Y. Wong et al.
APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2008)
Thermal and mechanical properties of cross-linked photopolymers based on multifunctional thiol-urethane ene monomers
Askim F. Senyurt et al.
MACROMOLECULES (2007)
The influence of ionic liquid's nature on free radical polymerization of vinyl monomers and ionic conductivity of the obtained polymeric materials
Yakov S. Vygodskii et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2007)
Thiol-ene photopolymerization mechanism and rate limiting step changes for various vinyl functional group chemistries
NB Cramer et al.
MACROMOLECULES (2003)
UV curable pressure-sensitive adhesives for fabricating semiconductors. I. Development of easily peelable dicing tapes
K Ebe et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Reversible chemical patterning on stimuli-responsive polymer film:: Environment-responsive lithography
L Ionov et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2003)
Structural control during the cyclopolymerization of unconjugated dienes
T Kodaira
PROGRESS IN POLYMER SCIENCE (2000)
Share Paper
