☆ 4.7 Article

Towards bifacial silicon heterojunction solar cells with reduced TCO use

PROGRESS IN PHOTOVOLTAICS (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Optoelectrical analysis of TCO plus Silicon oxide double layers at the front and rear side of silicon heterojunction solar cells

Alexandros Cruz et al.

Summary: Silicon heterojunction technology shows promising potential for solar cells, but the current loss related to the front and rear contacts remains a limiting factor. By using dielectric layers to reduce the thickness of the transparent conductive oxide (TCO), parasitic absorption and material consumption can be diminished, but resistive losses also increase. Experimental bifacial cells with 20 nm TCO perform similarly to reference cells with 75 nm, and a screen printing metallization method enhances the current density without compromising resistive losses. This approach has resulted in a certified champion cell with an efficiency of 24.6%.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Energy & Fuels

Design and optimization of hole collectors based on nc-SiOx:H for high-efficiency silicon heterojunction solar cells

Yifeng Zhao et al.

Summary: This study focuses on optimizing (p)-contacts in silicon heterojunction solar cells, showing that plasma treatment and thickness play significant roles in improving contact resistivity and fill factor. Optimal interface treatment and thickness can enhance hole collection efficiency and overall cell performance.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Chemistry, Physical

Low-resistivity p-type a-Si:H/AZO hole contact in high-efficiency silicon heterojunction solar cells

Zhuopeng Wu et al.

Summary: This study demonstrates the implementation of trimethyl boron doped p-type a-Si:H film as a hole transport layer contacting with indium-free aluminum doped zinc oxide in silicon heterojunction solar cells. The research shows that moderate doping concentration can help achieve low defect density and high doping level in the film, resulting in improved cell performance with low contact resistivity.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Prolonged Annealing Improves Hole Transport of Silicon Heterojunction Solar Cells

Shenglei Huang et al.

Summary: The diffusion of hydrogen atoms can reduce the Schottky barrier between p-a-Si:H and IWO, thereby improving the hole transport in SHJ solar cells and increasing both the fill factor and power conversion efficiency.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2021)

Add to Collection

Article Energy & Fuels

The sputter deposition of broadband transparent and highly conductive cerium and hydrogen co-doped indium oxide and its transfer to silicon heterojunction solar cells

Leonard Tutsch et al.

Summary: In this study, cerium and hydrogen co-doped indium oxide thin films were developed for high-performance transparent conductive oxide layers in SHJ devices, exhibiting excellent electro-optical film properties comparable to reactive plasma deposited films. The research also highlights the significant impact of substrate surface morphology and the atmosphere during post-deposition annealing on film properties.

PROGRESS IN PHOTOVOLTAICS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Raw material needs for the large-scale deployment of photovoltaics - Effects of innovation-driven roadmaps on material constraints until 2050

Estelle Gervais et al.

Summary: This paper evaluates the metal and metalloid requirements for next-generation photovoltaics on a global scale until 2050, highlighting the shortage of gallium, indium, arsenic, bismuth, and selenium. Strategies to mitigate risks, such as resource efficiency and alternative production processes, are discussed. Concerns are raised over the sustainability of multijunction solar cell technologies due to potential material shortages, calling for stronger integration of sustainable material use considerations in technological development.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

Transparent-conductive-oxide-free front contacts for high-efficiency silicon heterojunction solar cells

Shenghao Li et al.

Summary: In this study, TCO layers are substituted by utilizing lateral conduction of c-Si absorber in SHJ solar cells, achieving a TCO-free design with low series resistivity and good fill factor. Suppressing metal diffusion into a-Si:H layer through ozone treatment at the a-Si:H/metal interface improves passivation quality without increasing contact resistivity, enabling SHJ solar cells with TCO-free front contacts to achieve efficiencies exceeding 22%.

JOULE (2021)

Add to Collection

Article Physics, Applied

Advanced method for electrical characterization of carrier-selective passivating contacts using transfer-length-method measurements under variable illumination

L. -L. Senaud et al.

Summary: Carrier-selective passivating contacts are crucial for practical efficiency limits in c-Si solar cells, but transport losses affecting carrier collection still need to be addressed. A novel concept of "shell" and characterization methodology using TLM measurements was proposed to study charge-carrier transport in SHJ n-type contact stacks. The impact of illumination on contact resistivity was highlighted, underscoring the importance of measuring under maximum power point conditions for accurate characterization of solar cell transport losses.

JOURNAL OF APPLIED PHYSICS (2021)

Add to Collection

Article Energy & Fuels

Room-temperature sputtered tungsten-doped indium oxide for improved current in silicon heterojunction solar cells

Can Han et al.

Summary: This study optimized the tungsten-doped indium oxide film deposited by radio frequency magnetron sputtering at room temperature to improve the performance of silicon heterojunction solar cells. Optical simulation indicated a promising optical response in IWO, which was confirmed in fabricated devices. By adding an additional magnesium fluoride layer on the device, the IWO-based SHJ device achieved a higher efficiency compared to the ITO counterpart, mainly due to its current gain.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Energy & Fuels

Low-Resistance Hole Contact Stacks for Interdigitated Rear-Contact Silicon Heterojunction Solar Cells

Philipp Wagner et al.

Summary: The study focuses on achieving low contact resistivity for p-contacts in silicon heterojunction (SHJ) solar cells by using direct aluminum metallization instead of classic n-type transparent conductive oxides. The results show that carefully annealing the aluminum/amorphous silicon contact at moderate temperatures leads to a specific contact resistivity that is significantly lower than its silver/ITO counterpart. The study also highlights the efficiency of hole tunnel-recombination between aluminum and amorphous silicon, leading to improved device performance in terms of fill factor and power conversion efficiency.

IEEE JOURNAL OF PHOTOVOLTAICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption

Yuchao Zhang et al.

Summary: To significantly impact climate change, the annual production of photovoltaic (PV) modules must increase dramatically to around 3 terawatts (TW) by 2030. However, existing and future commercial PV cell technologies face sustainable manufacturing capacity limitations due to scarce metals, necessitating significant material consumption reductions for sustainable multi-TW scale manufacturing.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Impact of rough substrates on hydrogen-doped indium oxides for the application in CIGS devices

Darja Erfurt et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Energy & Fuels

Copper-Plating Metallization With Alternative Seed Layers for c-Si Solar Cells Embedding Carrier-Selective Passivating Contacts

Gianluca Limodio et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2020)

Add to Collection

Article Energy & Fuels

Influence of Silicon Layers on the Growth of ITO and AZO in Silicon Heterojunction Solar Cells

Alexandros Cruz et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2020)

Add to Collection

Article Physics, Applied

Lateral transport in silicon solar cells

Jan Haschke et al.

JOURNAL OF APPLIED PHYSICS (2020)

Add to Collection

Article Chemistry, Physical

Realizing the Potential of RF-Sputtered Hydrogenated Fluorine-Doped Indium Oxide as an Electrode Material for Ultrathin SiOx/Poly-Si Passivating Contacts

Can Han et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Graphene as non conventional transparent conductive electrode in silicon heterojunction solar cells

Laura Lancellotti et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Energy & Fuels

The role of heterointerfaces and subgap energy states on transport mechanisms in silicon heterojunction solar cells

Paul Procel et al.

PROGRESS IN PHOTOVOLTAICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Aluminum-Doped Zinc Oxide as Front Electrode for Rear Emitter Silicon Heterojunction Solar Cells with High Efficiency

Daniel Meza et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Energy & Fuels

Aluminium-Doped Zinc Oxide Rear Reflectors for High-Efficiency Silicon Heterojunction Solar Cells

Laurie-Lou Senaud et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

High-Mobility Hydrogenated Fluorine-Doped Indium Oxide Film for Passivating Contacts c-Si Solar Cells

Can Han et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Energy & Fuels

ITO-Free Silicon Heterojunction Solar Cells With ZnO:Al/SiO2 Front Electrodes Reaching a Conversion Efficiency of 23%

Anna B. Morales-Vilches et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Defect Modulation Doping

Mirko Weidner et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Proceedings Paper Green & Sustainable Science & Technology

Electrical and Optical Analysis of a Spray Coated Transparent Conductive Adhesive for Two-Terminal Silicon Based Tandem Solar Cells

Ulrike Heitmann et al.

9TH INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS (SILICONPV 2019) (2019)

Add to Collection

Article Energy & Fuels

Fluorine- and tin-doped indium oxide films grown by ultrasonic spray pyrolysis: Characterization and application in bifacial silicon concentrator solar cells

G. G. Untila et al.

SOLAR ENERGY (2018)

Add to Collection

Article Energy & Fuels

Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells

Paul Procel et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Add to Collection

Article Physics, Applied

Improved opto-electronic properties of silicon heterojunction solar cells with SiOx/Tungsten-doped indium oxide double anti-reflective coatings

Jian Yu et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2017)

Add to Collection

Article Energy & Fuels

Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology

Kunta Yoshikawa et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Add to Collection

Article Energy & Fuels

GENPRO4 Optical Model for Solar Cell Simulation and Its Application to Multijunction Solar Cells

Rudi Santbergen et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen doping of Indium Tin Oxide due to thermal treatment of hetero-junction solar cells

Kurt-Ulrich Ritzau et al.

THIN SOLID FILMS (2016)

Add to Collection

Article Physics, Applied

Hydrogenated indium oxide window layers for high-efficiency Cu(In,Ga)Se2 solar cells

Timo Jaeger et al.

JOURNAL OF APPLIED PHYSICS (2015)

Add to Collection

Article Energy & Fuels

Silicon heterojunction rear emitter solar cells: Less restrictions on the optoelectrical properties of front side TCOs

Martin Bivour et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)

Add to Collection

Article Energy & Fuels

TCO work function related transport losses at the a-Si:H/TCO-contact in SHJ solar cells

Kurt-Ulrich Ritzau et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)

Add to Collection

Article Energy & Fuels

Quantitative analyses of damp-heat-induced degradation in transparent conducting oxides

Jae Ik Kim et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Tungsten-Doped Indium Oxide Thin Film as an Effective High-Temperature Copper Diffusion Barrier

Jian Yu et al.

ECS SOLID STATE LETTERS (2014)

Add to Collection

Article Physics, Applied

Infrared light management in high-efficiency silicon heterojunction and rear-passivated solar cells

Zachary C. Holman et al.

JOURNAL OF APPLIED PHYSICS (2013)

Add to Collection

Article Energy & Fuels

Design and fabrication of a SiOx/ITO double-layer anti-reflective coating for heterojunction silicon solar cells

D. Zhang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)

Add to Collection

Article Energy & Fuels

Record Infrared Internal Quantum Efficiency in Silicon Heterojunction Solar Cells With Dielectric/Metal Rear Reflectors

Zachary C. Holman et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2013)

Add to Collection

Article Chemistry, Physical

Transparent Conducting Oxides for Photovoltaics: Manipulation of Fermi Level, Work Function and Energy Band Alignment

Andreas Klein et al.

MATERIALS (2010)

Add to Collection

Article Electrochemistry

ITO as a diffusion barrier between Si and Cu

CM Liu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.