Related references
Note: Only part of the references are listed.Additive Manufacturing for Enhancing Thermal Dissipation in Heat Sink Implementation: A Review
Bakhtiyar Mohammad Nafis et al.
HEAT TRANSFER ENGINEERING (2021)
Experimental and numerical mechanical characterization of additively manufactured Ti6Al4V lattice structures considering progressive damage
Sven Druecker et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
The role of node fillet, unit-cell size and strut orientation on the fatigue strength of Ti-6Al-4V lattice materials additively manufactured via laser powder bed fusion
M. Dallago et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
The Influence of Strut Waviness on the Tensile Response of Lattice Materials
Philipp E. Seiler et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2021)
Mechanical behavior of in-situ alloyed Ti6Al4V(ELI)-3 at.% Cu lattice structures manufactured by laser powder bed fusion and designed for implant applications
A. M. Vilardell et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Energy Absorption and Deformation Behavior of 3D Printed Triply Periodic Minimal Surface Stainless Steel Cellular Structures under Compression
Yingjing Liang et al.
STEEL RESEARCH INTERNATIONAL (2021)
Design analysis of the Schwartz D based heat exchanger: A numerical study
Reza Attarzadeh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Comparing endwall heat transfer among staggered pin fin, Kagome and body centered cubic arrays
Dong Liang et al.
APPLIED THERMAL ENGINEERING (2021)
Quasi-static and dynamic compressive behaviour of sheet TPMS cellular structures
Nejc Novak et al.
COMPOSITE STRUCTURES (2021)
Additive manufacturing of biomorphic scaffolds for bone tissue engineering
Fabrizia Caiazzo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Topology optimization and additive manufacturing in producing lightweight and low vibration gear body
Riad Ramadani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Precipitation-induced transition in the mechanical behavior of 3D printed Inconel 718 bcc lattices
S. Banait et al.
SCRIPTA MATERIALIA (2021)
Ballistic Impact Resistance of Bulletproof Vest Inserts Containing Printed Titanium Structures
Pawel Zochowski et al.
METALS (2021)
Understanding and suppressing shear band formation in strut-based lattice structures manufactured by laser powder bed fusion
Xiaoyang Liu et al.
MATERIALS & DESIGN (2021)
Image-Based Geometrical Characterization of Nodes in Additively Manufactured Lattice Structures
Bill Lozanovski et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2021)
3D printing for rechargeable lithium metal batteries
Shuang Zhou et al.
ENERGY STORAGE MATERIALS (2021)
Additive manufactured sandwich structures: Mechanical characterization and usage potential in small aircraft
Jannik Buehring et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2021)
On thermally managing lithium-ion battery cells by air-convection aspirated in tetrahedral lattice porous cold plates
Young Woo Son et al.
APPLIED THERMAL ENGINEERING (2021)
Bending properties of titanium lattice structures produced by electron beam melting process
Costanzo Bellini et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
Critical evaluation of additively manufactured metal lattices for viability in advanced heat exchangers
Inderjot Kaur et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
M. Benedetti et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Mechanical properties and fluid permeability of gyroid and diamond lattice structures for intervertebral devices: functional requirements and comparative analysis
Anatolie Timercan et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2021)
Metal Material, Properties and Design Methods of Porous Biomedical Scaffolds for Additive Manufacturing: A Review
Yuting Lv et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)
Dynamic characterization of 3D printed mechanical metamaterials with tunable elastic properties
Mohammad Naghavi Zadeh et al.
APPLIED PHYSICS LETTERS (2021)
Lattice material infiltration for hybrid metal-composite joints: Manufacturing and static strenght
Luca Raimondi et al.
COMPOSITE STRUCTURES (2021)
A Fundamental Investigation of Gas/Solid Heat and Mass Transfer in Structured Catalysts Based on Periodic Open Cellular Structures (POCS)
Claudio Ferroni et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)
Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review
Chang Ye et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Additively manufactured Ti-6Al-4V thin struts via laser powder bed fusion: Effect of building orientation on geometrical accuracy and mechanical properties
S. Murchio et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Material-structure-performance integrated laser-metal additive manufacturing
Dongdong Gu et al.
SCIENCE (2021)
Dual plateau stress of C15-type topologically close-packed lattice structures additive-manufactured by laser powder bed fusion
Xiaoyang Liu et al.
SCRIPTA MATERIALIA (2021)
Additive Manufacturing of 3D Microlattice Lithium-Ion Battery Electrodes: A Review
Modupeola Dada et al.
5TH INTERNATIONAL SYMPOSIUM ON NICKEL AND COBALT (NI-CO 2021) (2021)
Uniaxial static mechanical properties of regular, irregular and random additively manufactured cellular materials: Nominal vs. real geometry
Sunil Raghavendra et al.
FORCES IN MECHANICS (2021)
Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: A CFD analysis
Davar Ali et al.
EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2020)
Metallic stacked origami cellular materials: Additive manufacturing, properties, and modelling
J. A. Harris et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds
Arun Arjunan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
A review of recent research on bio-inspired structures and materials for energy absorption applications
Ngoc San Ha et al.
COMPOSITES PART B-ENGINEERING (2020)
Anisotropic design and optimization of conformal gradient lattice structures
Dawei Li et al.
COMPUTER-AIDED DESIGN (2020)
Assessment of trapped powder removal and inspection strategies for powder bed fusion techniques
Luke W. Hunter et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Metal frame structures with controlled anisotropic thermal conductivity
Xiaohui Bai et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Lattice structures of Cu-Cr-Zr copper alloy by selective laser melting: Microstructures, mechanical properties and energy absorption
Zhibo Ma et al.
MATERIALS & DESIGN (2020)
Tension-compression asymmetric mechanical behaviour of lattice cellular structures produced by selective laser melting
Sunil Raghavendra et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)
Comparison of Single-Phase Convection in Additive Manufactured Versus Traditional Metal Foams
Justin Broughton et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2020)
Processing parameters in laser powder bed fusion metal additive manufacturing
J. P. Oliveira et al.
MATERIALS & DESIGN (2020)
Porous Scaffold Design for Additive Manufacturing in Orthopedics: A Review
Hao Chen et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Packed Periodic Open Cellular Structures - an Option for the Intensification of Non-Adiabatic Catalytic Processes
Matteo Ambrosetti et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Mechanical Performances of Lightweight Sandwich Structures Produced by Material Extrusion-Based Additive Manufacturing
Sebastian Marian Zaharia et al.
POLYMERS (2020)
Design and Optimization of Lattice Structures: A Review
Chen Pan et al.
APPLIED SCIENCES-BASEL (2020)
Manufacturability, Mechanical Properties, Mass-Transport Properties and Biocompatibility of Triply Periodic Minimal Surface (TPMS) Porous Scaffolds Fabricated by Selective Laser Melting
Shuai Ma et al.
MATERIALS & DESIGN (2020)
The effects of microporosity in struts of gyroid lattice structures produced by laser powder bed fusion
A. du Plessis et al.
MATERIALS & DESIGN (2020)
Validation of Numerical Models of a Rotorcraft Crashworthy Seat and Subfloor
Paolo Astori et al.
AEROSPACE (2020)
Energy absorption in aluminium honeycomb cores reinforced with carbon fibre reinforced plastic tubes
A. Alantali et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)
Strategies for creating living, additively manufactured, open-cellular metal and alloy implants by promoting osseointegration, osteoinduction and vascularization: An overview
Lawrence E. Murr
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Lightweight cellular metal composites with zero and tunable thermal expansion enabled by ultrasonic additive manufacturing: Modeling, manufacturing, and testing
Ethan M. Parsons
COMPOSITE STRUCTURES (2019)
Defects as a root cause of fatigue failure of metallic components. I: Basic aspects
U. Zerbst et al.
ENGINEERING FAILURE ANALYSIS (2019)
Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects
Ali Fatemi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Fluid flow and heat transfer characteristics of octet truss lattice geometry
Pawankumar Ekade et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Fluid Permeability of Graded Porosity Scaffolds Architectured with Minimal Surfaces
Masoud Zhianmanesh et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering
Cambre N. Kelly et al.
ACTA BIOMATERIALIA (2019)
Design of metallic bone by additive manufacturing
Enrique Alabort et al.
SCRIPTA MATERIALIA (2019)
Permeability versus Design in TPMS Scaffolds
A. P. G. Castro et al.
MATERIALS (2019)
Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces
H. Montazerian et al.
ACTA BIOMATERIALIA (2019)
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Oraib Al-Ketan et al.
ADVANCED ENGINEERING MATERIALS (2019)
Recent advances in novel metallic honeycomb structure
Zhonggang Wang
COMPOSITES PART B-ENGINEERING (2019)
On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting
M. Dallago et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Synthetic bone: Design by additive manufacturing
D. Barba et al.
ACTA BIOMATERIALIA (2019)
Thermal conductivity of architected cellular metamaterials
A. Mirabolghasemi et al.
ACTA MATERIALIA (2019)
Design concepts for generating optimised lattice structures aligned with strain trajectories
Stephen Daynes et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Experimental investigation of heat transfer and fluid flow in octet-truss lattice geometry
Aniket Chaudhari et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Microstructure-topology relationship effects on the quasi-static and dynamic behavior of additively manufactured lattice structures
Kavan Hazeli et al.
MATERIALS & DESIGN (2019)
Effect of polygon order on additively manufactured lattice structures: a method for defining the threshold resolution for lattice geometry
A. Alghamdi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Topology optimization and characterization of Ti6A14V ELI cellular lattice structures by laser powder bed fusion for biomedical applications
A. M. Vilardell et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials
Xiang-Yu Zhang et al.
ACTA BIOMATERIALIA (2019)
An Examination of the Low Strain Rate Sensitivity of Additively Manufactured Polymer, Composite and Metallic Honeycomb Structures
Quoc Lam et al.
MATERIALS (2019)
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
Niloofar Sanaei et al.
MATERIALS & DESIGN (2019)
Effect of build orientation on the fatigue properties of as-built Electron Beam Melted Ti-6Al-4V alloy
Theo Persenot et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Energy absorption of a bio-inspired honeycomb sandwich panel
Ngoc San Ha et al.
JOURNAL OF MATERIALS SCIENCE (2019)
A comparison of shockwave dynamics in stochastic and periodic porous polymer architectures
Brittany Branch et al.
POLYMER (2019)
Mechanical performance of additively manufactured meta-biomaterials
Amir A. Zadpoor
ACTA BIOMATERIALIA (2019)
Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
Janos Plocher et al.
MATERIALS & DESIGN (2019)
SLM lattice structures: Properties, performance, applications and challenges
Tobias Maconachie et al.
MATERIALS & DESIGN (2019)
Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study
Eric Yang et al.
MATERIALS & DESIGN (2019)
An overview of information technology standardization activities related to additive manufacturing
Byoung Nam Lee et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Qualification of Ti6Al4V ELI Alloy Produced by Laser Powder Bed Fusion for Biomedical Applications
I. Yadroitsev et al.
JOM (2018)
Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing
I. Maskery et al.
POLYMER (2018)
An Overview of Materials with Triply Periodic Minimal Surfaces and Related Geometry: From Biological Structures to Self-Assembled Systems
Lu Han et al.
ADVANCED MATERIALS (2018)
A fundamental analysis of the influence of the geometrical properties on the effective thermal conductivity of open-cell foams
Mauro Bracconi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
Three dimensional lightweight lattice structures with large positive, zero and negative thermal expansion
Kai Wei et al.
COMPOSITE STRUCTURES (2018)
3D printed architected polymeric sandwich panels: Energy absorption and structural performance
H. Yazdani Sarvestani et al.
COMPOSITE STRUCTURES (2018)
Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges
X. Z. Zhang et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)
A review on functionally graded structures and materials for energy absorption
Fengxiang Xu et al.
ENGINEERING STRUCTURES (2018)
Experimental study on energy absorption of bionic tubes inspired by bamboo structures under axial crushing
B. C. Chen et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Dynamic compressive behaviour of cellular materials: A review of phenomenon, mechanism and modelling
Yongle Sun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Stiffness and specific energy absorption of additively-manufactured metallic BCC metamaterials composed of tapered beams
Thomas Tancogne-Dejean et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Three-dimensional metamaterials with a negative Poisson's ratio and a non-positive coefficient of thermal expansion
L. Ai et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting
M. Dallago et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Heat treatment of electron beam melted (EBM) Ti-6Al-4V: microstructure to mechanical property correlations
Srinivasan Raghavan et al.
RAPID PROTOTYPING JOURNAL (2018)
The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review
Davoud Jafari et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Quasi-static axial crushing behaviour and energy absorption of novel metal rope crochet-sintered mesh tubes
Fei Wu et al.
THIN-WALLED STRUCTURES (2018)
TOPOLOGY OPTIMIZATION BASED DESIGN OF LIGHTWEIGHT AND LOW VIBRATION GEAR BODIES
R. Ramadani et al.
INTERNATIONAL JOURNAL OF SIMULATION MODELLING (2018)
Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes
Martin Leary et al.
MATERIALS & DESIGN (2018)
Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
Patrick Koehnen et al.
MATERIALS & DESIGN (2018)
Gyroid porous titanium structures: A versatile solution to be used as scaffolds in bone defect reconstruction
A. Yanez et al.
MATERIALS & DESIGN (2018)
Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications
Arash Ataee et al.
MATERIALS & DESIGN (2018)
Metal 3D-printed wick structures for heat pipe application: Capillary performance analysis
Davoud Jafari et al.
APPLIED THERMAL ENGINEERING (2018)
Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density
Yingjun Wang et al.
JOURNAL OF MECHANICAL DESIGN (2018)
Ti6Al4V lightweight lattice structures manufactured by laser powder bed fusion for load-bearing applications
Anton du Plessis et al.
OPTICS AND LASER TECHNOLOGY (2018)
X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
Anton du Plessis et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2018)
Quasi-static and Dynamic Behavior of Additively Manufactured Metallic Lattice Cylinders
Hossein Sadeghi et al.
SHOCK COMPRESSION OF CONDENSED MATTER - 2017 (2018)
Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing
A. du Plessis et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Additive Manufacturing of Biomaterials, Tissues, and Organs
Amir A. Zadpoor et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Design of multifunctional lattice-frame materials for compact heat exchangers
Karen N. Son et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Impact response of additively manufactured metallic hybrid lattice materials
J. A. Harris et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
Mohsen Seifi et al.
JOM (2017)
Tailorable Thermal Expansion of Lightweight and Robust Dual-Constituent Triangular Lattice Material
Kai Wei et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2017)
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Guoying Dong et al.
JOURNAL OF MECHANICAL DESIGN (2017)
Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading
Joep de Krijger et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Open-cellular metal implant design and fabrication for biomechanical compatibility with bone using electron beam melting
L. E. Murr
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility
X. P. Tan et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Efficient design optimization of variable-density cellular structures for additive manufacturing: theory and experimental validation
Lin Cheng et al.
RAPID PROTOTYPING JOURNAL (2017)
Design of dimpled tubular structures for energy absorption
Kai Yang et al.
THIN-WALLED STRUCTURES (2017)
Tunable Multifunctional Thermal Metamaterials: Manipulation of Local Heat Flux via Assembly of Unit-Cell Thermal Shifters
Gwanwoo Park et al.
SCIENTIFIC REPORTS (2017)
Qualification of AM parts: Extreme value statistics applied to tomographic measurements
S. Romano et al.
MATERIALS & DESIGN (2017)
Optimisation of functionally graded lattice structures using isostatic lines
Stephen Daynes et al.
MATERIALS & DESIGN (2017)
Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review
Xiang-Yu Zhang et al.
MATERIALS (2017)
A Robust Multifunctional Sandwich Panel Design with Trabecular Structures by the Use of Additive Manufacturing Technology for a New De-Icing System
Carlo Giovanni Ferro et al.
TECHNOLOGIES (2017)
Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties
F. S. L. Bobbert et al.
ACTA BIOMATERIALIA (2017)
Metamaterials with negative Poisson's ratio and non-positive thermal expansion
L. Ai et al.
COMPOSITE STRUCTURES (2017)
Honeytubes: Hollow lattice truss reinforced honeycombs for crushing protection
Sha Yin et al.
COMPOSITE STRUCTURES (2017)
Materials for additive manufacturing
David Bourell et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Assessment of Periodic Open Cellular Structures for Enhanced Heat Conduction in Catalytic Fixed-Bed Reactors
Enrico Bianchi et al.
ADVANCED ENGINEERING MATERIALS (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Designing Advanced Filtration Media through Metal Additive Manufacturing
Neil Burns et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2016)
Electrically conducting sandwich cylinder with a planar lattice core under prescribed eigenstrain and magnetic field
A. H. Akbarzadeh et al.
COMPOSITE STRUCTURES (2016)
Experimental investigation of 3D woven Cu lattices for heat exchanger applications
Longyu Zhao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Energy absorption in lattice structures in dynamics: Experiments
Zuhal Ozdemir et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Numerical study of effective heat conductivities of foams by coupled conduction and radiation
Gerard L. Vignoles et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Mohsen Seifi et al.
JOM (2016)
Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications
A. Yanez et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces
Diab W. Abueidda et al.
MECHANICS OF MATERIALS (2016)
Materials and system requirements of high temperature thermal energy storage systems: A review. Part 2: Thermal conductivity enhancement techniques
Jaume Gasia et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Crashworthiness of vertex based hierarchical honeycombs in out-of-plane impact
Guangyong Sun et al.
MATERIALS & DESIGN (2016)
Structurally Efficient Three-dimensional Metamaterials with Controllable Thermal Expansion
Hang Xu et al.
SCIENTIFIC REPORTS (2016)
Adaptive bimaterial lattices to mitigate thermal expansion mismatch stresses in satellite structures
Marina M. Toropova et al.
ACTA ASTRONAUTICA (2015)
A New Type of Low Density Material: Shellular
Seung Chul Han et al.
ADVANCED MATERIALS (2015)
Build Direction Effects on Microchannel Tolerance and Surface Roughness
Jacob C. Snyder et al.
JOURNAL OF MECHANICAL DESIGN (2015)
Bioinspired engineering of honeycomb structure - Using nature to inspire human innovation
Qiancheng Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Key Performance Indicators of Tubes and Foam-Filled Tubes Used as Energy Absorbers
Yanfei Xiang et al.
INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2015)
Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
Seyed Mohammad Ahmadi et al.
MATERIALS (2015)
Efficient Design-Optimization of Variable-Density Hexagonal Cellular Structure by Additive Manufacturing: Theory and Validation
Pu Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Programmatic Lattice Generation for Additive Manufacture
Matthew McMillan et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL DESIGN TECHNOLOGY CONFERENCE, DESTECH2015 (2015)
Gielis' superformula and regular polygons
Masaya Matsuura
JOURNAL OF GEOMETRY (2015)
Designing Metallic Microlattices for Energy Absorber Applications
Tobias A. Schaedler et al.
ADVANCED ENGINEERING MATERIALS (2014)
Guiding conductive heat flux through thermal metamaterials
K. P. Vemuri et al.
APPLIED PHYSICS LETTERS (2014)
Thermal conductivities of iso-volume centre-symmetric honeycombs
L. Boldrin et al.
COMPOSITE STRUCTURES (2014)
Quasi-static energy absorption of hollow microlattice structures
Yilun Liu et al.
COMPOSITES PART B-ENGINEERING (2014)
Determination of effective thermal conductivity from geometrical properties: Application to open cell foams
Prashant Kumar et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells
S. M. Ahmadi et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Ultralight, Ultrastiff Mechanical Metamaterials
Xiaoyu Zheng et al.
SCIENCE (2014)
Numerical study on the thermal behavior of phase change materials (PCMs) embedded in porous metal matrix
Zhuo Li et al.
SOLAR ENERGY (2014)
Research progress of phase change materials (PCMs) embedded with metal foam (a review)
Jianqing Chen et al.
8TH INTERNATIONAL CONFERENCE ON POROUS METALS AND METALLIC FOAMS (2014)
3D Soft Metamaterials with Negative Poisson's Ratio
Sahab Babaee et al.
ADVANCED MATERIALS (2013)
Geometrical considerations in the control and manipulation of conductive heat flux in multilayered thermal metamaterials
Krishna P. Vemuri et al.
APPLIED PHYSICS LETTERS (2013)
Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
M. Smith et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Microstructure and mechanical behavior of porous Ti-6Al-4V parts obtained by selective laser melting
E. Sallica-Leva et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Static mechanical behaviours of stainless steel micro-lattice structures under different loading conditions
Recep Gumruk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Analysis of energy absorption characteristics of cylindrical multi-cell columns
Zhiliang Tang et al.
THIN-WALLED STRUCTURES (2013)
Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
Grzegorz Pyka et al.
MATERIALS (2013)
Stiffness and strength of tridimensional periodic lattices
Andrea Vigliotti et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Multiscale Design and Multiobjective Optimization of Orthopedic Hip Implants with Functionally Graded Cellular Material
Sajad Arabnejad Khanoki et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Lawrence E. Murr et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Near-zero thermal expansivity 2-D lattice structures: Performance in terms of mass and mechanical properties
N. M. A. Palumbo et al.
ACTA MATERIALIA (2011)
The quasi-static and blast response of steel lattice structures
M. Smith et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2011)
Ultralight Metallic Microlattices
T. A. Schaedler et al.
SCIENCE (2011)
Analysis of anisotropic behaviour of thermal conductivity in cellular metals
I. V. Belova et al.
SCRIPTA MATERIALIA (2011)
Differential effects of designed scaffold permeability on chondrogenesis by chondrocytes and bone marrow stromal cells
Jessica M. Kemppainen et al.
BIOMATERIALS (2010)
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Jayanthi Parthasarathy et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2010)
Effect of pore size on the tensile behavior of open-cell Ti foams: Experimental results
Mohamed Shehata Aly
MATERIALS LETTERS (2010)
A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)
Francis Agyenim et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)
C. Y. Zhao et al.
SOLAR ENERGY (2010)
Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting
M. Wong et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Hydrogen storage in metal hydride tanks equipped with metal foam heat exchanger
S. Mellouli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Effect of design parameters on enhancement of hydrogen charging in metal hydride reactors
Y. Kaplan
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Numerical analyses of the thermal conductivity of random hollow sphere structures
T. Fiedler et al.
MATERIALS LETTERS (2009)
Developing a new form of permeability and Kozeny-Carman constant for homogeneous porous media by means of fractal geometry
Peng Xu et al.
ADVANCES IN WATER RESOURCES (2008)
The quasi-static and blast loading response of lattice structures
S. McKown et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)
Mechanical properties of an extruded pyramidal lattice truss sandwich structure
Douglas T. Queheillalt et al.
SCRIPTA MATERIALIA (2008)
Simulation of heat transfer in a metal hydride reactor with aluminium foam
F. Laurencelle et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Mechanical properties of open-pore titanium foam
Thomas Imwinkelried
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Concepts for structurally robust materials that combine low thermal expansion with high stiffness
Craig A. Steeves et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2007)
Compressive strain at the onset of densification of cellular solids
Q. M. Li et al.
JOURNAL OF CELLULAR PLASTICS (2006)
The properties of foams and lattices
MF Ashby
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
Size effects and the shear response of aluminum foam
JF Rakow et al.
MECHANICS OF MATERIALS (2005)
Foam topology bending versus stretching dominated architectures
VS Deshpande et al.
ACTA MATERIALIA (2001)
Review on materials, microsensors, systems, and devices for high-temperature and harsh-environment applications
MR Werner et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2001)
Size effects in ductile cellular solids. Part II: experimental results
EW Andrews et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2001)