☆ 4.7 Article

Facile synthesis of zinc ferrite as adsorbent from high-zinc electric arc furnace dust

POWDER TECHNOLOGY (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Novel photocatalytic performance of magnetically recoverable MnFe2O4/BiVO4 for polluted antibiotics degradation

Nguyen Thi Dieu Cam et al.

Summary: The decoration of MnFe2O4 on BiVO4 led to the formation of a Z scheme heterojunction, which prevented charge recombination and produced e(-) and h(+) under visible light. The active oxygen radicals generated effectively degraded tetracycline, and the heterojunction was stable and easily recoverable by an external magnet due to high magnetically activity of MnFe2O4.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Construction & Building Technology

Effect of freshly produced electric arc-furnace dust and chloride-free chemical accelerators on concrete performance

Galal Fares et al.

Summary: This study investigated the use of chloride-free calcium-based chemical accelerators in ordinary concrete incorporating freshly homogenized electric arc-furnace dust (EAFD), and found that the presence of chemical accelerators significantly reduced the setting time of concrete, overcoming the negative impact of elevated zinc oxide content in EAFD. The optimal concrete mixture was identified to contain 4% CN and 4% EAFD, proving the effectiveness of the chemical accelerator-to-EAFD ratio in mitigating the delay in setting time.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Green synthesis, structure, cations distribution and bonding characteristics of superparamagnetic cobalt-zinc ferrites nanoparticles for Pb(II) adsorption and magnetic hyperthermia applications

Tetiana Tatarchuk et al.

Summary: A simple green method for the synthesis of cobalt-zinc ferrites nanoparticles was proposed in this study, with detailed structural and morphological analysis conducted using various techniques. The samples exhibited high adsorption capacity and magnetic hyperthermia performance, making them promising for potential applications in these fields.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Engineering, Chemical

Microwave-intensified treatment of low-zinc EAF dust: A route toward high-grade metallized product with a focus on multiple elements

Liancheng Wang et al.

Summary: This study successfully obtained a high-grade metallized product containing multiple valuable elements from low-zinc EAF dust through microwave reduction and magnetic separation. The product met the Chinese standard requirements for first-grade metallized products.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Study on leaching of electric arc furnace (EAF) slag for its sustainable applications as construction material

S. K. Singh et al.

Summary: The study on leaching behavior of electric arc furnace slag indicated that the leached hazardous heavy metals are negligible or within permissible limits under different test conditions, demonstrating its potential utilization as a construction material in an eco-friendly manner.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Chemistry, Physical

Using Prussian blue as a self-sacrificial template to construct MnO/MnFe2O4 microcubes as anodes for lithium-ion batteries

Jiajin Nie et al.

Summary: This article reports on a MnO/MnFe2O4 composite material as an anode material for Li-ion batteries, which inherits a regular cubic structure and porous structure for volume expansion buffering and more insertion sites, leading to high capacity and long-cycle stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Ceramics

Recycling of steelmaking electric arc furnace dust into aqueous cyan ceramic ink for inkjet printing process and its printability

Ji-Hyeon Lee et al.

Summary: The study synthesized cyan ceramic ink for ink-jet printing applications using EAFD, and the micronized cyan ceramic pigments were found to enhance the jettability and printability of the ink by adjusting its viscosity.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

FeSiCr@ZnFe2O4 core-shell nanostructure and properties enhancement on microwave absorption

Yang Chen et al.

Summary: FeSiCr@ZnFe2O4 nanocomposites were prepared by plasma arc discharging and hydrothermal methods, showing optimized microwave absorption performance with a reflection loss of -44.2 dB and an effective bandwidth between 12.2 and 18 GHz.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Magnetic, dielectric and structural properties of spinel ferrites synthesized by sol-gel method

Abdul Hakeem et al.

Summary: The study focused on the effects of ytterbium doping on structural, electrical and magnetic properties of Mn-ferrites, demonstrating an increase in coercivity and a decrease in remanence and saturation magnetization. Ytterbium incorporation also led to a reduction in both real and imaginary parts of permittivity, while enhancing the impedance of the ferrite lattice. The results suggest that these compounds are suitable for microwave absorption applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Slag foaming estimation in the electric arc furnace using machine learning based long short-term memory networks

Kyungchan Son et al.

Summary: A soft sensor model was developed using machine learning techniques to correlate influential process variables with slag foaming height, showing good performance in predicting slag foaming in the EAF steelmaking process. The model was validated using actual steelmaking data, achieving satisfactory performance metrics for multiple steel grades. Sensitivity-based pruning revealed that electricity, carbon, and oxygen were the most influential variables for slag foaming height, potentially leading to enhanced optimization in terms of energy saving and cost-efficiency.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Environmental Sciences

Magnesium-zinc ferrites as magnetic adsorbents for Cr(VI) and Ni(II) ions removal: Cation distribution and antistructure modeling

Tetiana Tatarchuk et al.

Summary: The study investigated magnesium-zinc ferrites as magnetic sorbents for environmental applications, determining ion distribution and magnetic parameters with low-temperature Mossbauer spectroscopy and VSM data. The adsorption of Cr(VI) and Ni(II) ions showed chemical nature according to Langmuir equation, with the best adsorption capacity found in certain samples. Increasing zinc content led to higher heavy metal removal percentage in mixed ferrite samples, showing promise for heavy metal adsorption.

CHEMOSPHERE (2021)

Add to Collection

Article Chemistry, Physical

Self-template fabrication of multi-scaled ZnFe2O4 microspheres and their excellent lithium-ion storage properties

C. Chen et al.

Summary: ZnFe2O4 microspheres with self-template multi-scaled structure were synthesized using a solvothermal method and various annealing processes. These microspheres showed modifiable internal structures and exhibited outstanding electrochemical properties and cyclic stabilities as active anodes for LIBs. Theoretical calculations were also conducted to understand the intermediate structures and electrochemical mechanisms of the electrodes.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust - A review

Jie Wang et al.

Summary: Electric arc furnace dust (EAFD) is a kind of metallurgical solid waste with huge production, and how to efficiently recover valuable metals from it has become the aim of various treatment processes. This paper discusses the physical and chemical properties of EAFD, as well as various treatment processes and the properties of the metals obtained from them. It provides theoretical guidance and practical reference for the treatment and utilization of EAFD.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Chemical

Preparation of ferrochromium nitride via reduction and nitridation of chromite spinel with ammonia gas

Qingqing Hu et al.

Summary: The study on reducing ferrochromium nitride with ammonia gas showed that reaction temperature, time, and input fraction of ammonia gas significantly influenced the reaction process. Under appropriate conditions, ferrochromium nitride with high nitrogen content can be obtained.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Lychee-like ZnO/ZnFe2O4 core-shell hollow microsphere for improving acetone gas sensing performance

Yu Hu et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Physical

Synthesis, morphology, crystallite size and adsorption properties of nanostructured Mg-Zn ferrites with enhanced porous structure

Tetiana Tatarchuk et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Engineering, Chemical

Microwave-assisted self-reduction of EAF dust-biochar composite briquettes for production of direct reduced iron

Qing Ye et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Metal-doped (Cu,Zn)Fe(2)O(4)from integral utilization of toxic Zn-containing electric arc furnace dust: An environment-friendly heterogeneous Fenton-like catalyst

Jun-wu Li et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

ZnFe2O4/ZnO nanosheets assembled microspheres for high performance trimethylamine gas sensing

Cong Zheng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Engineering, Environmental

Pyrometallurgical removal of zinc from basic oxygen steelmaking dust - A review of best available technology

Daniel J. C. Stewart et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Add to Collection

Article Engineering, Chemical

Magnetic Ni-Zn spinel ferrite nanopowder from toxic Zn-bearing electric arc furnace dust: A promising treatment process

Hui-gang Wang et al.

MINERALS ENGINEERING (2020)

Add to Collection

Article Engineering, Chemical

Effects of direct reduction process on the microstructure and reduction characteristics of carbon-bearing nickel laterite ore pellets

Yingyi Zhang et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Machine learning lattice constants for spinel compounds

Yun Zhang et al.

CHEMICAL PHYSICS LETTERS (2020)

Add to Collection

Article Engineering, Chemical

Utilization of blast furnace sludge for the removal of zinc from steelmaking dusts using microwave heating

Mamdouh Omran et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

The EAF dust chemical and phase composition research techniques

Laura M. Simonyan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Engineering, Environmental

Evaluation of heavy metal leachability of incinerating recycled aggregate and solidification/stabilization products for construction reuse using TCLP, multi-final pH and EDTA-mediated TCLP leaching tests

Chien-Chih Lu et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Studies on structural and optical properties of nano ZnFe2O4 and ZnFe2O4 TiO2 composite synthesized by co-precipitation route

M. Chandrika et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Microwave-Assisted Reduction of Electric Arc Furnace Dust with Biochar: An Examination of Transition of Heating Mechanism

Qing Ye et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Electrostatic self-assembly synthesis of ZnFe2O4 quantum dots (ZnFe2O4@C) and electromagnetic microwave absorption

Zhenguo Gao et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Review Engineering, Environmental

Treatments of electric arc furnace dust and halogenated plastic wastes: A review

Mohammad Al-harahsheh et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Electric arc furnace (EAF) dust: Application of air classification for improved zinc enrichment in in-plant recycling

C. Lanzerstorfer

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Chemistry, Physical

Preparation of magnetic ferrite by optimizing the synthetic pH and its application for the removal of Cd(II) from Cd-NH3-H2O system

Fang Liu et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Add to Collection

Article Chemistry, Physical

Visible-light photocatalytic activity of zinc ferrites

Arsou Arimi et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2018)

Add to Collection

Article Physics, Applied

Effect of Metal Substitution on the Magnetic Properties of Spinel Ferrites Synthesized from Zinc-Bearing Dust

Jian-ming Gao et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2018)

Add to Collection

Article Engineering, Environmental

Utilization of Zn-containing electric arc furnace dust for multi-metal doped ferrite with enhanced magnetic property: From hazardous solid waste to green product

Hui-gang Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Add to Collection

Article Engineering, Chemical

Effect of steelmaking dust characteristics on suitable recycling process determining: Ferrochrome converter (CRC) and electric arc furnace (EAF) dusts

Mamdouh Omran et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Article Engineering, Environmental

Zinc recovery from purified electric arc furnace dust leach liquors by chemical precipitation

P. Xanthopoulos et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2017)

Add to Collection

Article Materials Science, Ceramics

Facile synthesis of metal-doped Ni-Zn ferrite from treated Zn-containing electric arc furnace dust

Hui-gang Wang et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Chemistry, Physical

Structural, Magnetic, and Thermodynamic Evolutions of Zn-Doped Fe3O4 Nanoparticles Synthesized Using a One-Step Solvothermal Method

Xin Liu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Add to Collection

Article Chemistry, Applied

Nano nickel ferrite (NiFe2O4) as anti-corrosion pigment for API 5L X-80 steel: An electrochemical study in acidic and saline media

Ali U. Chaudhry et al.

DYES AND PIGMENTS (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Behavior of zinc, iron and calcium from electric arc furnace (EAF) dust in hydrometallurgical processing in sulfuric acid solutions: Thermodynamic and kinetic aspects

F. Kukurugya et al.

HYDROMETALLURGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Recovery of zinc and iron from high iron-bearing zinc calcine by selective reduction roasting

Junwei Han et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Add to Collection

Article Engineering, Chemical

Innovative methodology for comprehensive utilization of high iron bearing zinc calcine

Junwei Han et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Leaching and recovery of zinc from leaching residue of zinc calcine based on membrane filter press

Zhen-guang Ru et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Role of mode of heating on the synthesis of nanocrystalline zinc ferrite

Prashant R. Chaudhari et al.

APPLIED NANOSCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Cd(II) adsorption from aqueous solution by raw and modified kaolinite

Ahmet Sari et al.

APPLIED CLAY SCIENCE (2014)

Add to Collection

Article Environmental Sciences

Characterisation of the sintering behaviour of Waelz slag from electric arc furnace (EAF) dust recycling for use in the clay ceramics industry

N. Quijorna et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2014)

Add to Collection

Article Engineering, Environmental

Microwave treatment of electric arc furnace dust with PVC: Dielectric characterization and pyrolysis-leaching

Mohammad Al-harahsheh et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

Add to Collection

Article Engineering, Environmental

Hydrometallurgical process for zinc recovery from electric arc furnace dust (EAFD) Part I: Characterization and leaching by diluted sulphuric acid

P. Oustadakis et al.

JOURNAL OF HAZARDOUS MATERIALS (2010)

Add to Collection

Article Engineering, Chemical

Kinetic and equilibrium studies of Pb(II) and Cd(II) removal from aqueous solution onto colemanite ore waste

Ahmet Sari et al.

DESALINATION (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.