Related references
Note: Only part of the references are listed.Use of 2-D and 3-D unsteady RANS in the computation of wall bounded buoyant flows
Constantinos Katsamis et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2022)
Assessment of Different CFD Modeling and Solving Approaches for a Supersonic Steam Ejector Simulation
Jingshu Xiao et al.
ATMOSPHERE (2022)
Effects of near wall flow and non-equilibrium reaction coupling on heat flux prediction inside a 7-elements GOX/GCH4 combustion chamber
Jianfei Wei et al.
APPLIED THERMAL ENGINEERING (2022)
Comparative study of two fluid model and dense discrete phase model for simulations of gas-solid hydrodynamics in circulating fluidized beds
Ying Wu et al.
PARTICUOLOGY (2021)
Development of an Integrated Framework for Multiscale, Multiphase Modeling of Industrial Slurry-Phase Reactors for Polyethylene Production
Yi Zhou et al.
MACROMOLECULAR REACTION ENGINEERING (2021)
A fast modeling of chemical reactions in industrial-scale olefin polymerization fluidized beds using recurrence CFD
Firas Dabbagh et al.
AICHE JOURNAL (2021)
The influence of catalyst flow rate and superficial gas velocity on the modified two-phase model for propylene polymerization in a gas-phase fluidized bed reactor
Mohd Farid Atan et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2021)
Experimental and CFD simulation of slurry flow in the annular flow path using two-fluid model
Hamed Movahedi et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)
Theories and Applications of CFD-DEM Coupling Approach for Granular Flow: A Review
Mahmoud A. El-Emam et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)
Modelling of Condensed Mode Cooling during the Polymerization of Ethylene in Fluidized Bed Reactors
Rita Ferreira Alves et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)
CFD Modeling and Simulation of the Hydrodynamics Characteristics of Coarse Coal Particles in a 3D Liquid-Solid Fluidized Bed
Jian Peng et al.
MINERALS (2021)
Experimental verification of 2-dimensional computational fluid dynamics modeling of supercritical fluids Fischer Tropsch reactor bed
Aya E. Abusrafa et al.
CATALYSIS TODAY (2020)
Two-fluid model with variable particle-particle restitution coefficient: application to the simulation of FCC riser reactor
Hanbin Zhong et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2020)
Important mesoscale phenomena in gas phase fluidized bed ethylene polymerization
Jingyuan Sun et al.
PARTICUOLOGY (2020)
Analysis and discussion of two fluid modelling of pipe flow of fully suspended slurry
Gianandrea Vittorio Messa et al.
POWDER TECHNOLOGY (2020)
Study of wall-to-bed heat transfer in circulating fluidized bed riser based on CFD simulation
Waritnan Wanchan et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)
Operational Optimization of Polymerization Reactors with Computational Fluid Dynamics and Embedded Molecular Weight Distribution Using the Iterative Surrogate Model Method
Jing Kong et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Possibilities and Limits of Computational Fluid Dynamics-Discrete Element Method Simulations in Process Engineering: A Review of Recent Advancements and Future Trends
Paul Kieckhefen et al.
ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 11 (2020)
Modeling and simulation of an industrial slurry phase ethylene polymerization reactor: effect of reactor operating variables
Amit K. Thakur et al.
IRANIAN POLYMER JOURNAL (2020)
Effect of turbulence modeling on hydrodynamics of a turbulent contact absorber
Atta Ullah et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Ultrahigh molecular weight polyethylene: Catalysis, structure, properties, processing and applications
Ketan Patel et al.
PROGRESS IN POLYMER SCIENCE (2020)
Fluidized bed CFD using simplified solid-phase coupling
Farhana Diba et al.
POWDER TECHNOLOGY (2020)
On the scaling law of JKR contact model for coarse-grained cohesive particles
Xizhong Chen et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Kinetic modeling of deep vacuum residue hydroconversion in a pilot scale continuous slurry reactor with recycle
Barbara Browning et al.
CHEMICAL ENGINEERING JOURNAL ADVANCES (2020)
Coupled CFD-PBM simulation of bubble size distribution in a 2D gas-solid bubbling fluidized bed with a bubble coalescence and breakup model
Teng Wang et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Advances in Mathematical Modeling of Gas-Phase Olefin Polymerization
Mohd Farid Atan et al.
PROCESSES (2019)
Fluid dynamics in continuous settler
F. D. T. Luna et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Experiments and CFD-DEM simulations of cohesive particles sedimentation in stilled fluid
Runrun Lu et al.
POWDER TECHNOLOGY (2019)
Extending the EMMS-bubbling model to fluidization of binary particle mixture: Parameter analysis and model validation
Nouman Ahmad et al.
CHEMICAL ENGINEERING SCIENCE (2019)
A comprehensive model for the micro and meso-scale level olefin polymerization: framework and predictions
Siddharth Kulkarni et al.
IRANIAN POLYMER JOURNAL (2019)
Review of the empirical correlations for the drag coefficient of rigid spheres
Walter R. A. Goossens
POWDER TECHNOLOGY (2019)
CFD simulations of a full-loop CFB reactor using coarse-grained Eulerian-Lagrangian dense discrete phase model: Effects of modeling parameters
Adnan Muhammad et al.
POWDER TECHNOLOGY (2019)
A survey on numerical simulations of drag and heat reduction mechanism in supersonic/hypersonic flows
Xiwan Sun et al.
CHINESE JOURNAL OF AERONAUTICS (2019)
Computational fluid dynamics simulation of gas-liquid-solid polyethylene fluidized bed reactors incorporating with a dynamic polymerization kinetic model
Pan Hui et al.
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2019)
Particle Growth during the Polymerization of Olefins on Supported Catalysts. Part 2: Current Experimental Understanding and Modeling Progresses on Particle Fragmentation, Growth, and Morphology Development
Arash Alizadeh et al.
MACROMOLECULAR REACTION ENGINEERING (2018)
Effects of specularity and particle-particle restitution coefficients on the recirculation characteristics of dispersed gas-particle flows through a sudden expansion
Subrat Kotoky et al.
ADVANCED POWDER TECHNOLOGY (2018)
Experimental determination of particle-particle restitution coefficient via double pendulum method
Jakub Hlosta et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Modeling of complex liquid-solid flow of particle swelling in slurry loop reactors
Rongtao Zhou et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Optimal Design of Bypass Line for an Industrial-Scale 8-Leg Polyolefin Loop Reactor to Manage Slurry Dispersion Using Hydraulic and CFD Simulations
Yuehao Li et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
The Effect of Residence Time Distribution on the Slurry-Phase Catalytic Ethylene Polymerization: An Experimental and Computational Study
Tommaso Casalini et al.
MACROMOLECULAR REACTION ENGINEERING (2018)
Progress in Technology and Catalysts for Continuous Stirred Tank Reactor Type Slurry Phase Polyethylene Processes
Wang Dengfei et al.
PETROLEUM CHEMISTRY (2018)
Modeling and simulation of particle size distribution behavior in gas-liquid-solid polyethylene fluidized bed reactors
Hui Pan et al.
POWDER TECHNOLOGY (2018)
Flow characteristics of coarse particles in horizontal hydraulic conveying
Avi Uzi et al.
POWDER TECHNOLOGY (2018)
Simulation of dry powder inhalers: Combining micro-scale, meso-scale and macro-scale modeling
Berend van Wachem et al.
AICHE JOURNAL (2017)
Important Analysis of Liquid Vaporization Modeling Scheme in Computational Fluid Dynamics Modeling of Gas Liquid Solid Polyethylene Fluidized Bed Reactors
Hui Pan et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Effect of Superficial Gas Velocity on the Solid Temperature Distribution in Gas Fluidized Beds with Heat Production
Mohammad Banaei et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Using computational fluid dynamics to analyze the performance of the Maxblend impeller in solid-liquid mixing operations
Prakash Mishra et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2017)
Computational study on the effect of slug dynamics on the operation of a polyolefin 8-leg loop reactor of industrial scale
Yuehao Li et al.
POWDER TECHNOLOGY (2017)
CFD-DEM study on cohesive particles in a spouted bed
Huibin Xu et al.
POWDER TECHNOLOGY (2017)
Comparisons of Eulerian-Eulerian and CFD-DEM simulations of mixing behaviors in bubbling fluidized beds
Jian Le Lee et al.
POWDER TECHNOLOGY (2017)
Sensitivity analysis of spray painting process to input parameters: Validation of CFD jet impingement model against an experimental dataset
Barry Moore et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2017)
Numerical simulation of flow behavior of particles in a liquid-solid stirred vessel with baffles
Shuyan Wang et al.
ADVANCED POWDER TECHNOLOGY (2017)
Concentration and velocity profiles of sediment-water mixtures using the drift flux model
Joep C. Goeree et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2016)
Characterization of solid-liquid settling suspensions using Electrical Impedance Tomography: A comparison between numerical, experimental and visual information
R. Silva et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2016)
3D numerical simulation of a lab-scale pressurized dense fluidized bed focussing on the effect of the particle-particle restitution coefficient and particle-wall boundary conditions
Pascal Fede et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Segregation and dispersion of binary solids in liquid fluidised beds: A CFD-DEM study
Zhengbiao Peng et al.
CHEMICAL ENGINEERING SCIENCE (2016)
CFD simulation of dense particulate reaction system: Approaches, recent advances and applications
Wenqi Zhong et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Modeling of sand-water slurry flow through horizontal pipe using CFD
Manoj Kumar Gopaliya et al.
JOURNAL OF HYDROLOGY AND HYDROMECHANICS (2016)
CFD Analysis of Gas-Particle Heat Transfer in Gas-Phase Olefin Polymerizations
Icaro Pianca Guidolini et al.
MACROMOLECULAR REACTION ENGINEERING (2016)
Hydrodynamics and particle mixing/segregation measurements in an industrial gas phase olefin polymerization reactor using image processing technique and CFD-PBM model
Roya Aramesh et al.
MEASUREMENT (2016)
Simulations of flow behavior of particles in a liquid-solid fluidized bed using a second-order moments model
Shuyan Wang et al.
POWDER TECHNOLOGY (2016)
CFD-DEM simulation of liquid-solid fluidized bed with dynamic restitution coefficient
Guodong Liu et al.
POWDER TECHNOLOGY (2016)
CFD simulations of gas-liquid-solid flow in fluidized bed reactors - A review
Hui Pan et al.
POWDER TECHNOLOGY (2016)
Transport modeling of sedimenting particles in a turbulent pipe flow using Euler-Lagrange large eddy simulation
Sunil K. Arolla et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2015)
CFD investigations of particle segregation and dispersion mechanisms inside a polyolefin 8-leg loop reactor of industrial scale
Yuehao Li et al.
POWDER TECHNOLOGY (2015)
Analysis of Effect of Grain Size on Various Parameters of Slurry Flow through Pipeline Using CFD
Manoj Kumar Gopaliya et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2015)
Influence of drag and turbulence modelling on CFD predictions of solid liquid suspensions in stirred vessels
A. Tamburini et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2014)
New structure-based model for Eulerian simulation of hydrodynamics in gas-solid fluidized beds of Geldart group A particles
A. H. Ahmadi Motlagh et al.
CHEMICAL ENGINEERING SCIENCE (2014)
Coupling CFD and Diffusion Models for Analyzing the Convective Drying Behavior of a Single Rice Kernel
Ramadan ElGamal et al.
DRYING TECHNOLOGY (2014)
Solid velocity and concentration fluctuations in highly concentrated liquid-solid (slurry) pipe flows
S. A. Hashemi et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2014)
CFD simulation of fluidized bed reactors for polyolefin production - A review
M. J. H. Khan et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)
Catalytic Olefin Polymerization Process Modeling: Multi-Scale Approach and Modeling Guidelines for Micro-Scale/Kinetic Modeling
Vasileios Touloupidis
MACROMOLECULAR REACTION ENGINEERING (2014)
A comparison of two-fluid model, dense discrete particle model and CFD-DEM method for modeling impinging gas-solid flows
Xizhong Chen et al.
POWDER TECHNOLOGY (2014)
Numerical simulation of the hydrodynamics of a liquid solid circulating fluidized bed
S. Roy et al.
POWDER TECHNOLOGY (2014)
Softening of polyethylene powders at reactor conditions
J. Chmelar et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Eulerian-Lagrangian modeling of turbulent liquid-solid slurries in horizontal pipes
Jesse Capecelatro et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2013)
Euler-Euler CFD modeling of fluidized bed: Influence of specularity coefficient on hydrodynamic behavior
Chanchal Loha et al.
PARTICUOLOGY (2013)
Two- and three-dimensional computational studies of liquid-solid fluidization
Kai Zhang et al.
POWDER TECHNOLOGY (2013)
A CFD-PBM-PMLM integrated model for the gas-solid flow fields in fluidized bed polymerization reactors
Wei-Cheng Yan et al.
AICHE JOURNAL (2012)
CFD study on hydrodynamics in three-phase fluidized beds-Application of turbulence models and experimental validation
Mohsen Hamidipour et al.
CHEMICAL ENGINEERING SCIENCE (2012)
Influence of solid-phase wall boundary condition on CFD simulation of spouted beds
Xingying Lan et al.
CHEMICAL ENGINEERING SCIENCE (2012)
A more efficient simulator of particle size distribution in slurry phase polyolefin systems
John T. McCoy et al.
COMPUTERS & CHEMICAL ENGINEERING (2012)
Agglomeration and de-agglomeration of rotating wet doublets
Carly M. Donahue et al.
JOURNAL OF FLUID MECHANICS (2012)
Simulation of flow behavior of liquid and particles in a liquid-solid fluidized bed
Shuyan Wang et al.
POWDER TECHNOLOGY (2012)
CFD SIMULATION OF STIRRED TANKS: COMPARISON OF TURBULENCE MODELS (PART II: AXIAL FLOW IMPELLERS, MULTIPLE IMPELLERS AND MULTIPHASE DISPERSIONS)
Jyeshtharaj B. Joshi et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2011)
CFD SIMULATION OF STIRRED TANKS: COMPARISON OF TURBULENCE MODELS. PART I: RADIAL FLOW IMPELLERS
Jyeshtharaj B. Joshi et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2011)
Coupling of CFD with PBM for a pilot-plant tubular loop polymerization reactor
Wei-Cheng Yan et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Three-dimensional CFD study of liquid-solid flow behaviors in tubular loop polymerization reactors: The effect of guide vane
Wei-Cheng Yan et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Modeling of Particle Pneumatic Conveying Using DEM and DPM Methods
Maksim Mezhericher et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2011)
CFD modeling of liquid-solid fluidization: Effect of drag correlation and added mass force
Xiaoyan Huang
PARTICUOLOGY (2011)
Modeling and simulation of an industrial slurry-phase catalytic olefin polymerization reactor series
V. Touloupides et al.
CHEMICAL ENGINEERING SCIENCE (2010)
A literature review on mechanisms and models for the coalescence process of fluid particles
Yixiang Liao et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Numerical investigations of catalyst-liquid slurry flow in the photocatalytic reactor for hydrogen production based on algebraic slip model
Hu XiaoWei et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Discrete particle simulation of particle-fluid flow: model formulations and their applicability
Z. Y. Zhou et al.
JOURNAL OF FLUID MECHANICS (2010)
Modeling fluid-particle interaction in dilute-phase turbulent liquid-particle flow simulation
Kunn Hadinoto et al.
PARTICUOLOGY (2010)
Numerical simulation of liquid-solid two-phase flow in a tubular loop polymerization reactor
De-Pan Shi et al.
POWDER TECHNOLOGY (2010)
Three-dimensional CFD model of the temperature field for a pilot-plant tubular loop polymerization reactor
Xi Gao et al.
POWDER TECHNOLOGY (2010)
Study of wall boundary condition in numerical simulations of bubbling fluidized beds
Tingwen Li et al.
POWDER TECHNOLOGY (2010)
CFD SIMULATION OF GAS-SOLID BUBBLING FLUIDIZED BED: A NEW METHOD FOR ADJUSTING DRAG LAW
Farshid Vejahati et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2009)
CFD simulation of hydrodynamics of gas-liquid-solid fluidised bed reactor
R. Panneerselvam et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Hydrodynamic Simulation of Horizontal Slurry Pipeline Flow Using ANSYS-CFX
Kalekudithi Ekambara et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)
CFD and experimental studies of solids hold-up distribution and circulation patterns in gas-solid fluidized beds
G. N. Ahuja et al.
CHEMICAL ENGINEERING JOURNAL (2008)
CFD simulation of the high shear mixing process using kinetic theory of granular flow and frictional stress models
Anders Darelius et al.
CHEMICAL ENGINEERING SCIENCE (2008)
CFD simulations of bubbling beds of rough spheres
Shuyan Wang et al.
CHEMICAL ENGINEERING SCIENCE (2008)
CFD simulation of liquid-phase mixing in solid-liquid stirred reactor
G. R. Kasat et al.
CHEMICAL ENGINEERING SCIENCE (2008)
A numerical study of developing slurry flow in the entrance region of a horizontal pipe
C. X. Lin et al.
COMPUTERS & FLUIDS (2008)
Drag coefficient in one-dimensional two-group two-fluid model
Yang Liu et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2008)
A mixed contact model for an immersed collision between two solid surfaces
Fu-Ling Yang et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2008)
Derivation, simulation and validation of a cohesive particle flow CFD model
Berend van Wachem et al.
AICHE JOURNAL (2008)
A drag force closure for uniformly dispersed fluidized suspensions
Luca Mazzei et al.
CHEMICAL ENGINEERING SCIENCE (2007)
CFD modelling of a liquid-solid fluidized bed
Jack T. Cornelissen et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Discrete particle simulation of particulate systems: Theoretical developments
H. P. Zhu et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Drag force of intermediate Reynolds number flow past mono- and bidisperse arrays of spheres
R. Beetstra et al.
AICHE JOURNAL (2007)
Review of discrete particle modeling of fluidized beds
N. G. Deen et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Dynamics of particle-particle collisions in a viscous liquid
F. -L. Yang et al.
PHYSICS OF FLUIDS (2006)
CFD modelling of liquid fluidized beds in slugging mode
Paola Lettieri et al.
POWDER TECHNOLOGY (2006)
Drag reduction by gas injection into turbulent boundary layer: Density ratio effect
P. V. Skudarnov et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2006)
Some new approaches to building and implementation of wall-functions for modeling of near-wall turbulent flows
SV Utyuzhnikov
COMPUTERS & FLUIDS (2005)
Solids motion and holdup profiles in liquid fluidized beds
S Limtrakul et al.
CHEMICAL ENGINEERING SCIENCE (2005)
State of the art and future trends in CFD simulation of stirred vessel hydrodynamics
M Sommerfeld et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2004)
Computer simulations of gas-solid flow in spouted beds using kinetic-frictional stress model of granular flow
HL Lu et al.
CHEMICAL ENGINEERING SCIENCE (2004)
Application of the direct quadrature method of moments to polydisperse gas-solid fluidized beds
R Fan et al.
POWDER TECHNOLOGY (2004)
Hydrodynamics of gas-solid flow around immersed tubes in bubbling fluidized beds
YR He et al.
POWDER TECHNOLOGY (2004)
Hybrid approach to modeling an industrial polyethylene process
M Hinchliffe et al.
AICHE JOURNAL (2003)
Three scale thermomechanical theory for swelling biopolymeric systems
PP Singh et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Numerical investigations of liquid-solid slurry flows in a fully developed turbulent flow region
J Ling et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2003)
Quadrature method of moments for aggregation-breakage processes
DL Marchisio et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)
A numerical study on agglomerate formation in a fluidized bed of fine cohesive particles
K Kuwagi et al.
CHEMICAL ENGINEERING SCIENCE (2002)
Progress in the generalization of wall-function treatments
TJ Craft et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2002)
Liquid fluidised beds in slugging mode: pressure drop and flow regime transition
R Di Felice
POWDER TECHNOLOGY (2002)
Extension of kinetic theory to cohesive particle flow
H Kim et al.
POWDER TECHNOLOGY (2002)
Numerical simulation of multiphase flow in bubble column reactors. Influence of bubble coalescence and break-up
E Olmos et al.
CHEMICAL ENGINEERING SCIENCE (2001)
Mixing and dispersion of particle ropes in lean phase pneumatic conveying
H Bilirgen et al.
POWDER TECHNOLOGY (2001)
Single particle modelling for olefin polymerization on supported catalysts: A review and proposals for future developments
TF McKenna et al.
CHEMICAL ENGINEERING SCIENCE (2001)
Formation and dispersion of ropes in pneumatic conveying
A Yilmaz et al.
POWDER TECHNOLOGY (2001)
Hydrodynamic modelling of dense gas-fluidised beds using the kinetic theory of granular flow: effect of coefficient of restitution on bed dynamics
MJV Goldschmidt et al.
CHEMICAL ENGINEERING SCIENCE (2001)
Kinetic theory for particles in dilute and dense solid-liquid flows
JR Ni et al.
JOURNAL OF HYDRAULIC ENGINEERING-ASCE (2000)
Effect of a combination of two elbows on particle roping in pneumatic conveying
R Schallert et al.
POWDER TECHNOLOGY (2000)
Riser hydrodynamics: Simulation using kinetic theory
A Neri et al.
AICHE JOURNAL (2000)