Related references
Note: Only part of the references are listed.Flowability of ultrafine-tailings cemented paste backfill incorporating superplasticizer: Insight from water film thickness theory
Zhenbang Guo et al.
POWDER TECHNOLOGY (2021)
Ultrasonic evaluation of strength properties of cemented paste backfill: Effects of mineral admixture and curing temperature
Haiqiang Jiang et al.
ULTRASONICS (2020)
Rheological Properties of Cemented Paste Backfill with Alkali-Activated Slag
Yunpeng Kou et al.
MINERALS (2020)
On the quantification of degrees of reaction and hydration of sodium silicate-activated slag cements
Solmoi Park et al.
MATERIALS AND STRUCTURES (2020)
The effects of calcium formate on the early hydration of alkali silicate activated slag
Yu Jin et al.
MATERIALS AND STRUCTURES (2019)
Effectiveness of alkali-activated slag as alternative binder on workability and early age compressive strength of cemented paste backfills
Haiqiang Jiang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Activated slag as partial replacement of cement mortars: Effect of temperature and a novel admixture
Chaaruchandra Korde et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Assessment of Acoustic Emission and Triaxial Mechanical Properties of Rock-Cemented Tailings Matrix Composites
Shuai Cao et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)
Effect of sodium-silicate activated slag at different silicate modulus on the strength and microstructural properties of full and coarse sulphidic tailings paste backfill
Ferdi Cihangir et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Reducing environmental impacts: The use of basic oxygen furnace slag in portland cement
S. Z. Carvalho et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Chloride binding and mobility in sodium carbonate-activated slag pastes and mortars
Xinyuan Ke et al.
MATERIALS AND STRUCTURES (2017)
Experiment research on mix design and early mechanical performance of alkali-activated slag using response surface methodology (RSM)
Yuan Gao et al.
CERAMICS INTERNATIONAL (2016)
Temperature and activator effect on early-age reaction kinetics of alkali-activated slag binders
Berhan Seium Gebregziabiher et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Yield stress of cemented paste backfill in sub-zero environments: Experimental results
Jiang Haigiang et al.
MINERALS ENGINEERING (2016)
Very early-age reaction kinetics and microstructural development in alkali-activated slag
Berhan S. Gebregziabiher et al.
CEMENT & CONCRETE COMPOSITES (2015)
Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions
Rupert J. Myers et al.
CEMENT AND CONCRETE RESEARCH (2015)
Relationship between compressive strength and UPV of GGBFS based geopolymer mortars exposed to elevated temperatures
Sharmarke Abdi Omer et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Properties and microstructure of alkali-activated slag cement cured at below- and about-normal temperature
Gu Ya-min et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Paste backfill of high-sulphide mill tailings using alkali-activated blast furnace slag: Effect of activator nature, concentration and slag properties
Ferdi Cihangir et al.
MINERALS ENGINEERING (2015)
Impacts of silica modulus on the early strength of alkaline activated ground slag/ultrafine palm oil fuel ash based concrete
Moruf Olalekan Yusuf et al.
MATERIALS AND STRUCTURES (2015)
Influence of starting material on the early age hydration kinetics, microstructure and composition of binding gel in alkali activated binder systems
Elisabeth Deir et al.
CEMENT & CONCRETE COMPOSITES (2014)
The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures
Gokhan Gorhan et al.
COMPOSITES PART B-ENGINEERING (2014)
Mechanical properties of calcium silicate hydrate (C-S-H) at nano-scale: A molecular dynamics study
Dongshuai Hou et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Strength development in clay-fly ash geopolymer
Patimapon Sukmak et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Louise K. Turner et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
A review of binders used in cemented paste tailings for underground and surface disposal practices
Amjad Tariq et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2013)
Coupling temperature, cement hydration and rheological behaviour of fresh cemented paste backfill
D. Wu et al.
MINERALS ENGINEERING (2013)
Alkali activation of a slag at ambient and elevated temperatures
Ekin Altan et al.
CEMENT & CONCRETE COMPOSITES (2012)
Production of geopolymeric binder from blended waste concrete powder and fly ash
Saeed Ahmari et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Effects of activator type/concentration and curing temperature on alkali-activated binder based on copper mine tailings
Saeed Ahmari et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Utilisation of alkali-activated blast furnace slag in paste backfill of high-sulphide mill tailings: Effect of binder type and dosage
Ferdi Cihangir et al.
MINERALS ENGINEERING (2012)
Durability assessment of alkali activated slag (AAS) concrete
David W. Law et al.
MATERIALS AND STRUCTURES (2012)
Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags
M. Ben Haha et al.
CEMENT AND CONCRETE RESEARCH (2011)
The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load
Alaa M. Rashad et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Kiatsuda Somna et al.
FUEL (2011)
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
Benjamin C. McLellan et al.
JOURNAL OF CLEANER PRODUCTION (2011)
A model for the C-A-S-H gel formed in alkali-activated slag cements
F. Puertas et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Daniel L. Y. Kong et al.
CEMENT AND CONCRETE RESEARCH (2010)
Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags
Susan A. Bernal et al.
CEMENT AND CONCRETE RESEARCH (2010)
A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill
M. Fall et al.
ENGINEERING GEOLOGY (2010)
Role of water in the synthesis of calcined kaolin-based geopolymer
Z. Zuhua et al.
APPLIED CLAY SCIENCE (2009)
Hydration kinetics modeling of Portland cement considering the effects of curing temperature and applied pressure
Feng Lin et al.
CEMENT AND CONCRETE RESEARCH (2009)
Workability and strength of lignite bottom ash geopolymer mortar
Apha Sathonsalowaphak et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Effect of curing under pressure on compressive strength development of cemented paste backfill
Erol Yilmaz et al.
MINERALS ENGINEERING (2009)
Influence of NaOH solution on the synthesis of fly ash geopolymer
Ubolluk Rattanasak et al.
MINERALS ENGINEERING (2009)
Comparative study on the characteristics of fly ash and bottom ash geopolymers
Prinya Chindaprasirt et al.
WASTE MANAGEMENT (2009)
Integrated mine tailings management by combining environmental desulphurization and cemented paste backfill:: Application to mine Doyon, Quebec, Canada
Mostafa Benzaazoua et al.
MINERALS ENGINEERING (2008)
Mix proportioning of underground cemented tailings backfill
M. Fall et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2008)
Effects of type and dosage of alkaline activator and temperature on the properties of alkali-activated slag mixtures
Vladimir Zivica
CONSTRUCTION AND BUILDING MATERIALS (2007)
Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization
M Fall et al.
CEMENT AND CONCRETE RESEARCH (2005)
Experimental characterization of the influence of tailings fineness and density on the quality of cemented paste backfill
M Fall et al.
MINERALS ENGINEERING (2005)
A contribution to understanding the hardening process of cemented pastefill
M Benzaazoua et al.
MINERALS ENGINEERING (2004)
Pore solution in alkali-activated slag cement pastes. Relation to the composition and structure of calcium silicate hydrate
F Puertas et al.
CEMENT AND CONCRETE RESEARCH (2004)
29Si and 27Al NMR study of alkali-activated slag
SD Wang et al.
CEMENT AND CONCRETE RESEARCH (2003)
Chemical factors that influence the performance of mine sulphidic paste backfill
M Benzaazoua et al.
CEMENT AND CONCRETE RESEARCH (2002)
Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio
S Alonso et al.
MATERIALS LETTERS (2001)