Related references
Note: Only part of the references are listed.Advanced robotics and additive manufacturing of composites: towards a new era in Industry 4.0
Hetal Parmar et al.
MATERIALS AND MANUFACTURING PROCESSES (2022)
Monitoring and modeling of part thickness evolution in vacuum infusion process
Baris Caglar et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
The effect of hybridization on microstructure and thermo-mechanical properties of composites reinforced with different weaves of glass and carbon fabrics
Tayyab Khan et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Experimental characterisation of textile compaction response: A benchmark exercise
A. X. H. Yong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Carbon coated piezoresistive fiber sensors: From process monitoring to structural health monitoring of composites - A review
M. S. Irfan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
A Novel Composite with Structural Health Monitoring Functionality via 2D and 3D Impedance Mapping Topography
Georgios Foteinidis et al.
APPLIED SCIENCES-BASEL (2021)
Layer-wise damage prediction in carbon/Kevlar/S-glass/E-glass fibre reinforced epoxy hybrid composites under low-velocity impact loading using advanced 3D computed tomography
A. Vasudevan et al.
INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2020)
Evaluation of boron nitride nanoparticles on delamination in drilling carbon fiber epoxy nanocomposite materials
Halil Burak Kaybal et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Scalable and multifunctional carbon nanotube-based textile as distributed sensors for flow and cure monitoring
Hongbo Dai et al.
CARBON (2020)
On the metal thermoplastic composite interface of Ti alloy/UHMWPE-Elium® laminates
Logesh Shanmugam et al.
COMPOSITES PART B-ENGINEERING (2020)
Investigation on Ultrasonic Welding Attributes of Novel Carbon/Elium® Composites
Somen K. Bhudolia et al.
MATERIALS (2020)
Ramie fabric Elium® composites with flame retardant coating: Flammability, smoke, viscoelastic and mechanical properties
Pooria Khalili et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Ultrasonic Welding of Novel Carbon/Elium® Thermoplastic Composites with Flat and Integrated Energy Directors: Lap Shear Characterisation and Fractographic Investigation
Somen K. Bhudolia et al.
MATERIALS (2020)
Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites
Somen K. Bhudolia et al.
MATERIALS LETTERS (2020)
Low-velocity impact behaviors of a fully thermoplastic composite laminate fabricated with an innovative acrylic resin
M. E. Kazemi et al.
COMPOSITE STRUCTURES (2020)
Quasi-static indentation response of core-shell particle reinforced novel NCCF/Elium® composites at different feed rates
Somen K. Bhudolia et al.
COMPOSITES COMMUNICATIONS (2020)
Thermoplastic hybrid-matrix composite prepared by a room-temperature vacuum infusion and in-situ polymerisation process
Winifred Obande et al.
COMPOSITES COMMUNICATIONS (2020)
The influence of mechanical recycling on the properties of thermotropic liquid crystalline polymer and long glass fiber reinforced polypropylene
Tianran Chen et al.
COMPOSITES PART B-ENGINEERING (2020)
Development of Recyclable and High-Performance In Situ Hybrid TLCP/Glass Fiber Composites
Tianran Chen et al.
JOURNAL OF COMPOSITES SCIENCE (2020)
Micro-flow sensor for continuous resin fluidity monitoring between fibers
Yongxi He et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Digital Twins and Cyber-Physical Systems toward Smart Manufacturing and Industry 4.0: Correlation and Comparison
Fei Tao et al.
ENGINEERING (2019)
Highly conductive ultra-sensitive SWCNT-coated glass fiber reinforcements for laminate composites structural health monitoring
Lazaros Tzounis et al.
COMPOSITES PART B-ENGINEERING (2019)
Carbon nanomaterials enabled fiber sensors: A structure-oriented strategy for highly sensitive and versatile in situ monitoring of composite curing process
Sida Luo et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of hostile solutions on stress relaxation of carbon/epoxy composites
P. N. B. Reis et al.
POLYMER DEGRADATION AND STABILITY (2019)
Mechanical and thermomechanical characterisation of vacuum-infused thermoplastic- and thermoset-based composites
Winifred Obande et al.
MATERIALS & DESIGN (2019)
Mechanical properties and failure modes of hybrid fiber reinforced polymer composites with a novel liquid thermoplastic resin, Elium®
M. E. Kazemi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Flammability, Smoke, Mechanical Behaviours and Morphology of Flame Retarded Natural Fibre/Elium® Composite
Pooria Khalili et al.
MATERIALS (2019)
Sizing effects on the interfacial shear strength of a carbon fibre reinforced two-component thermoplastic polymer
Andreas Hendlmeier et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Seawater ageing effect on the mechanical properties of composites with different fiber and matrix types
E. Jose-Trujillo et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Structure dependent properties of carbon nanomaterials enabled fiber sensors for in situ monitoring of composites
Guantao Wang et al.
COMPOSITE STRUCTURES (2018)
Low-velocity impact response of carbon fibre composites with novel liquid Methylmethacrylate thermoplastic matrix
Somen K. Bhudolia et al.
COMPOSITE STRUCTURES (2018)
Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix
Somen K. Bhudolia et al.
COMPOSITES PART B-ENGINEERING (2018)
Recent advances in carbon-fiber-reinforced thermoplastic composites: A review
Shan-Shan Yao et al.
COMPOSITES PART B-ENGINEERING (2018)
Thermal, rheological, and dielectric analyses of the polymerization reaction of a liquid thermoplastic resin for infusion manufacturing of composite materials
Olivia de Andrade Raponi et al.
POLYMER TESTING (2018)
Carbon Nanomaterials Based Smart Fabrics with Selectable Characteristics for In-Line Monitoring of High-Performance Composites
Guantao Wang et al.
MATERIALS (2018)
Modeling the viscoelastic compaction response of 3D woven fabrics for liquid composite molding processes
Kamran A. Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Flame retarding epoxy composites with poly(phosphazene-co-bisphenol A)-coated boron nitride to improve thermal conductivity and thermal stability
Taoguang Qu et al.
RSC ADVANCES (2017)
CNT Enabled Co-braided Smart Fabrics: A New Route for Non-invasive, Highly Sensitive & Large-area Monitoring of Composites
Sida Luo et al.
SCIENTIFIC REPORTS (2017)
Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing
Fei Tao et al.
IEEE ACCESS (2017)
Graphene coated piezo-resistive fabrics for liquid composite molding process monitoring
Muhammad A. Ali et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Effect of geometric dimensions and fibre orientation on 3D moisture diffusion in flax fibre reinforced thermoplastic and thermosetting composites
Abderrazak Chilali et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Glass fibres reinforced acrylic thermoplastic resin-based tri-block copolymers composites: Low velocity impact response at various temperatures
R. Matadi Boumbimba et al.
COMPOSITE STRUCTURES (2017)
In situ process monitoring of hierarchical micro-/nano-composites using percolated carbon nanotube networks
Joel Renaud Ngouanom Gnidakouong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Influence of the fiber/matrix strength on the mechanical properties of a glass fiber/thermoplastic-matrix plain weave fabric composite
Z. Boufaida et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg
Han Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Graphene oxide powders with different oxidation degree, prepared by synthesis variations of the Hummers method
Jesus Guerrero-Contreras et al.
MATERIALS CHEMISTRY AND PHYSICS (2015)
Vegetal fibers in polymeric composites: a review
Paulo Henrique Fernandes Pereira et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2015)
Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties
Geraldine Oliveux et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Graphite Nanoplatelet Enabled Embeddable Fiber Sensor for in Situ Curing Monitoring and Structural Health Monitoring of Polymeric Composites
Sida Luo et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
SWCNT-thin-film-enabled fiber sensors for lifelong structural health monitoring of polymeric composites - From manufacturing to utilization to failure
Sida Luo et al.
CARBON (2014)
Glass fiber-reinforced polymer composites - a review
T. P. Sathishkumar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
A methodology for flow-front estimation in LCM processes based on pressure sensors
Claudio Di Fratta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Recycling of composite materials
Yongxiang Yang et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2012)
Out-of-autoclave cure cycle study of a resin film infusion process using in situ process monitoring
C. Garschke et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Cross-sectional monitoring of resin impregnation using an area-sensor array in an RIM process
Ryosuke Matsuzaki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Life cycle monitoring of large-scale CFRP VARTM structure by fiber-optic-based distributed sensing
Shu Minakuchi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Simulation of the reinforcement compaction and resin flow during the complete resin infusion process
Q. Govignon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology (VERITy) process
Nitesh Gupta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
A grid of dielectric sensors to monitor mold filling and resin cure in resin transfer molding
Bekir Yenilmez et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Tensile Properties of CFRP and Hybrid FRP Composites at Elevated Temperatures
Shenghu Cao et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Compaction modelling of textile preforms for composite structures
P. Potluri et al.
COMPOSITE STRUCTURES (2008)
Full field monitoring of the resin flow and laminate properties during the resin infusion process
Q. Govignon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water
Raul Pinero-Hernanz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Monitoring of resin flow in the resin transfer molding (RTM) process using point-voltage sensors
Murat Danisman et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Constraints on monitoring resin flow in the resin transfer molding (RTM) process by using thermocouple sensors
Goker Tuncol et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Viscoelastic response of dry and wet fibrous materials during infusion processes
PA Kelly et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Remote monitoring of resin transfer molding processes by distributed dielectric sensors
MC Hegg et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Characterization of preform permeability in the presence of race tracking
JM Lawrence et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding. Part I: design and algorithm development
KT Hsiao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Analysis of dynamic flows through porous media.: Part I:: Comparison between saturated and unsaturated flows in fibrous reinforcements
J Bréard et al.
POLYMER COMPOSITES (2003)
Analysis of dynamic flows through porous media.: Part II:: Deformation of a double-scale fibrous reinforcement
J Bréard et al.
POLYMER COMPOSITES (2003)
On-line characterization of bulk permeability and race-tracking during the filling stage in resin transfer molding process
M Devillard et al.
JOURNAL OF COMPOSITE MATERIALS (2003)
Dielectric cure monitoring for glass/polyester prepreg composites
HG Kim et al.
COMPOSITE STRUCTURES (2002)
Linear direct current sensing system for flow monitoring in Liquid Composite Moulding
T Luthy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Carbon fibers for composites
S Chand
JOURNAL OF MATERIALS SCIENCE (2000)
Share Paper
