Related references
Note: Only part of the references are listed.Damage evolution behavior of bi-adhesive repaired composites under bending load by acoustic emission and micro-CT
Xiao-long Ji et al.
COMPOSITE STRUCTURES (2022)
Impact resistance and failure mechanism of 3D printed continuous fiber-reinforced cellular composites
S. M. Fijul Kabir et al.
JOURNAL OF THE TEXTILE INSTITUTE (2021)
Impact behavior of nanoengineered, 3D printed plate-lattices
J. Jefferson Andrew et al.
MATERIALS & DESIGN (2021)
Predication of the in-plane mechanical properties of continuous carbon fibre reinforced 3D printed polymer composites using classical laminated-plate theory
Khalid Saeed et al.
COMPOSITE STRUCTURES (2021)
Energy absorption and self-sensing performance of 3D printed CF/PEEK cellular composites
J. Jefferson Andrew et al.
MATERIALS & DESIGN (2021)
3D printing of continuous carbon fiber reinforced thermoset composites using UV curable resin
Md Atikur Rahman et al.
POLYMER COMPOSITES (2021)
Fused deposition modeling based polymeric materials and their performance: A review
Vigneshwaran Shanmugam et al.
POLYMER COMPOSITES (2021)
A comparison of compression molded and additively manufactured short carbon fiber reinforced polyamide-6 samples and the effect of different infill printing patterns
Andreas Hendlmeier et al.
POLYMER COMPOSITES (2021)
Real-time distortion monitoring during fused deposition modeling via acoustic emission
Feng Li et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2020)
Mechanical behaviour of 3D printed composite parts with short carbon fiber reinforcements
M. Somireddy et al.
ENGINEERING FAILURE ANALYSIS (2020)
Experimental and analytical investigation of the bending behaviour of 3D-printed bio-based sandwich structures composites with auxetic core under cyclic fatigue tests
Khawla Essassi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
Qinghao He et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Micro-CT Imaging of Fibers in Composite Laminates under High Strain Bending
A. T. Zehnder et al.
EXPERIMENTAL TECHNIQUES (2020)
Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing
Peng Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Additive manufacturing of continuous carbon fiber reinforced poly-ether-ether-ketone with ultrahigh mechanical properties
Baoning Chang et al.
POLYMER TESTING (2020)
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
Sachini Wickramasinghe et al.
POLYMERS (2020)
In Situ Process Monitoring for Additive Manufacturing Through Acoustic Techniques
Md Shahjahan Hossain et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Effects of carbon nanotubes on open-hole carbon fiber reinforced polymer composites
Kang-ning Han et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Comparison on mechanical properties, damage evolution and aging effects of multi-delaminated composites under three point bending
Reng Qin et al.
SN APPLIED SCIENCES (2020)
In Situ Additive Manufacturing Process Monitoring With an Acoustic Technique: Clustering Performance Evaluation Using K-Means Algorithm
Hossein Taheri et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Experimental study of the process failure diagnosis in additive manufacturing based on acoustic emission
Haixi Wu et al.
MEASUREMENT (2019)
Optimization of acoustic emission parameters to discriminate failure modes in glass-epoxy composite laminates using pattern recognition
Suresh Kumar Chelliah et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)
Dynamic mesh method based on diffusion equation and nodal rotation for high-aspect-ratio composite wings
Bing Zhang et al.
COMPOSITE STRUCTURES (2019)
Impregnation and interlayer bonding behaviours of 3D-printed continuous carbon-fiber-reinforced poly-ether-ether-ketone composites
Luo Meng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
J. M. Chacon et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Flexural damage behavior of carbon fiber three-dimensional braided composites using acoustic emission and micro-CT
Wei Zhou et al.
MATERIALS RESEARCH EXPRESS (2019)
Tensile and flexural behaviors of additively manufactured continuous carbon fiber-reinforced polymer composites
Tianyu Yu et al.
COMPOSITE STRUCTURES (2019)
Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
Behnam Akhoundi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Effect of patch hybridization on the compression behavior of patch repaired glass/epoxy composite laminates using acoustic emission monitoring
J. Jefferson Andrew et al.
POLYMER COMPOSITES (2018)
Investigation on delamination and flexural properties in drilling of carbon nanotube/polymer composites
Hossein Heidary et al.
COMPOSITE STRUCTURES (2018)
Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
M. A. Caminero et al.
COMPOSITES PART B-ENGINEERING (2018)
Barely visible impact damage assessment in laminated composites using acoustic emission
Milad Saeedifar et al.
COMPOSITES PART B-ENGINEERING (2018)
Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
G. D. Goh et al.
MATERIALS & DESIGN (2018)
Acoustic Emission Based on Cluster and Sentry Function to Monitor Tensile Progressive Damage of Carbon Fiber Woven Composites
Wei Zhou et al.
APPLIED SCIENCES-BASEL (2018)
An investigation into 3D printing of fibre reinforced thermoplastic composites
L. G. Blok et al.
ADDITIVE MANUFACTURING (2018)
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Chuncheng Yang et al.
RAPID PROTOTYPING JOURNAL (2017)
Bending behavior of sandwich composite structures with tunable 3D-printed core materials
Tiantian Li et al.
COMPOSITE STRUCTURES (2017)
Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing
Andrew N. Dickson et al.
ADDITIVE MANUFACTURING (2017)
Residual strength and damage characterization of repaired glass/epoxy composite laminates using AE and DIC
J. Jefferson Andrew et al.
COMPOSITE STRUCTURES (2016)
Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures
Garrett W. Melenka et al.
COMPOSITE STRUCTURES (2016)
Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission
Arthur Monti et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Nanya Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
Compression after impact strength of repaired GFRP composite laminates under repeated impact loading
J. Jefferson Andrew et al.
COMPOSITE STRUCTURES (2015)
Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites
Li Li et al.
COMPOSITE STRUCTURES (2014)
High-strain-rate impact in Kevlar-woven composites and fracture analysis using acoustic emission
Sung-Choong Woo et al.
COMPOSITES PART B-ENGINEERING (2014)
Monitoring of acoustic emission damage during tensile loading of 3D woven carbon/epoxy composites
S. V. Lomov et al.
TEXTILE RESEARCH JOURNAL (2014)
Integration of the Kohonen's self-organising map and k-means algorithm for the segmentation of the AE data collected during tensile tests on cross-ply composites
N Godin et al.
NDT & E INTERNATIONAL (2005)
Share Paper
